User Guide

• Replace the battery compartment door and secure the screws.

• Secure the thermo-hygrometer remote sensor in the desired location.

Mounting

• The remote thermo-hygrometer sensor can be placed on the flat surface or mounted on

the wall in vertical position

• Use the wall mount hardware and screws provided when mounting the

thermo-hygrometer sensor on the wall

Placement

• The remote thermo-hygrometer sensor should be placed in the area with a free air

circulation and sheltered from the direct sunlight and an extreme weather conditions.

• Ideally, place the thermo-hygrometer sensor above the natural surfaces (such as a

grassy lawn).

• Avoid placing the thermo-hygrometer sensor near sources of heat such as chimneys and

heating elements.

• Avoid any areas collecting and radiating a heat from the sun, such as metal, brick or

concrete structures, paving, patios and decks.

• The international standard for the valid air temperature measurements is 4 feet

(1.25meters) above the ground.

Operation

Immediately after batteries are correctly installed, the remote sensor will start transmitting a

temperature and humidity data to the main unit.

Note: Every time after replacing batteries in the sensor, press and old DOWN arrow button

for 3-4 seconds on the main unit’s control panel or hand held remote control.