User Guide

16
• Wind direction
• Rainfall amount with minimum and maximum memory
• UV intensity with daily and weekly highs and lows
• 200 weather records without PC connection
• PC software (included) and USB port
• Operating range from 100 feet (30 meters) up to 328 feet (100 meters)
Display
• Light sensor detects low light conditions and LCD lights up automatically when
adapter is connected
• Infrared remote control of all display functions
Power
• AC/DC adapter for automatic remote control
• 4 AA batteries
Battery installation
• Open the battery compartment door on the back of the main unit.
• Insert four (4) AA size batteries according to the polarities shown and replace the battery
compartment door.
• Connect 7.5 V AC/DC adapter provided to the main display unit and plug into to the wall
power outlet.
Note: The AC/DC adapter connection is required for automatic backlight control and a
handheld remote control functions. If the main unit operates solely on the battery
power, the auto backlight control and handheld remote control functions will be
disabled.
• When placing the main unit on the table or other horizontal surface, unfold the table
stand adjusting it to the desired viewing angle.
• When mounting the main unit on the wall or vertical surface, fold the table stand back
into the unit and use the mounting hardware provided.
Placement
• Make sure that the main unit is locating within the operating range of all remote weather
sensors.
• Ideally the remote weather sensors should be mounted within the line of sight of the main
unit.
• Transmission range may be affected by trees, metal structures and electronic appliances.
• Test reception before permanently mounting all the remote weather sensors.
Avoid placing the main unit in the following areas:
• Direct sunlight and surfaces emitting and radiating heat, such as heating ducts or air
conditioners.
• Areas with interference from the wireless devices (such as cordless phones, radio
headsets, baby listening devices) and electronic appliances.