User Guide

17
Operation
Once the main unit is powered, the display will show all available LCD segments for 2 seconds.
IMPORTANT:
All of the display functions will be locked, allowing setting your local altitude and
pressure parameters .The locked display will show the pressure icon and abbreviation “inHg”
flashing in Pressure Window, indoor temperature and humidity readings in
Temperature/Humidity Window, default time in Time Window and a default sunset/sunrise time
in the Sunrise/Sunset Window.
If pressure and altitude are not configured during this time, the Weather Station will self-calibrate in
a few minutes and show the default settings for the pressure and altitude (sea level) and then all
remote weather sensors readings.
NOTE: When adjusting altitude in feet or meters, be noted that the last small digit is not a
decimal but a whole number.
Example: “
350” feet means 350 feet (three hundred fifty feet).
To set the pressure & altitude units and program your altitude, use the handheld remote control or
the main unit control panel
G H
I
J