User Guide

41
precipitation measurements.
• Detach the protective screen and lid.
• Clean with soapy water and a damp cloth, removing dirt, leaves or debris
• Clean small holes and parts with Q-tips or pipe-cleaner.
• Watch out for spiders or insects that might have crawled into the funnel.
• Clean the swinging mechanism with a damp cloth.
Troubleshooting
Check here before contacting customer service
Issue source Symptom Solution
Main unit - Weather
Station
US Atomic Time signal is
not received
Place unit by the window and keep it
there at least overnight
Main unit - Weather
Station
The weather readings
weather station are
different from the TV, radio
or official weather reports
The weather data may vary
considerably due to different
environmental conditions and
placement.
Check the placement tips included in
this manual to site your weather
sensors in the best possible way.
Check batteries
Check location
Cannot locate remote
sensor
Press and hold DOWN ( ▼) arrow
button on the Weather Station control
panel to search for the signal form the
remote sensor
Cannot change the
channel
Press “RESET” after setting the
channel
Cannot change the C° to
F° and back
Press “RESET” after setting C/F
Remote sensor
(anemometer, rain
gauge or
temperature/humidity
sensor)
Data does not match data
on the main unit
Initiate manual sensor search (Press
and hold DOWN ( ▼) button on the
Weather Station control panel
PRECAUTIONS
This product is engineered to give you years of satisfactory service if handled carefully. Here are a