Owner's Manual

LED Symbol
Color
Pattern
Indication
LED 4
Acknowledge
Red
Solid On
Waiting for acknowledgement from
TCC
Off
Idle state
1 Flash*
When flashing with LED 1, unit has
failed activation
LED 5 Radio Green
Off
Telguard initialized
On
Telguard initializing with cellular
network
Flash (1
sec)
Radio receiving message
Flash (2
sec)
Radio sending message
Flash *
(2 flashes
/ 6 sec)
Link Supervision Mode
LED 6
Not used
LED 7 Trip Input Green
Solid On
Trip Input activated
Off
Trip Input not activated or restored
LED 8 AC
Power
Red Solid On AC power connected to unit
Note: * means that the LED pattern will repeat until condition clears.
4.3 Accessories
4.3.1 Included with TG-7FS LTE
• Cellular antenna: 8in, 50-ohm nominal, omni-directional LTE antenna with
knuckle and male TNC connector. 2dBi gain.
• Antenna cable: 12-ft RG-58 UL approved cable in PVC jacket with 50-ohm TNC
male connector and TNC female bulkhead.
• Mounting bracket: 90° angle bracket with .566in-diameter opening for TNC
connector.
• RJ cord: 7-ft RJ-45 plug-to-plug flat modular cord with PVC outer jacket.
• Battery harness: 20in battery cable assembly with VHR-2N connector on one
end and two quick connect connectors on black and red 18ga wires.
firealarmresources.com