Operating Manual FocusPRO TH5000 Series TM Non-Programmable Digital Thermostat 69-1923ES
Battery Holder Press down and pull to remove batteries. Batteries should be replaced once a year (see page 10). This manual covers the following models: TH5110D: For 1 Heat/1 Cool systems TH5220D: For up to 2 Heat/2 Cool systems TH5320U: For up to 3 Heat/2 Cool systems (Remove battery holder to find model number) Need Help? For assistance with this product please visit http://yourhome.honeywell.com or call Honeywell Customer Care toll-free at 1-800-468-1502 Read and save these instructions. ® U.S.
FocusPRO TH5000 Series TM Table of contents About your new thermostat Appendices Thermostat features.................................... 2 Setup at a glance........................................ 3 Quick reference to controls........................ 4 Quick reference to display......................... 5 Battery replacement................................. 10 In case of difficulty................................... 11 Customer assistance................................ 13 Accessories/replacement parts.
Operating Manual About your new thermostat Congratulations on the purchase of your new Honeywell thermostat. It has been designed to give you many years of reliable service and easy-to-use, push-button climate control. Features • One-touch temperature control. • Large, clear, backlit display is easy to read—even in the dark. • Displays both room temperature and temperature setting. • Removable battery holder for fast, easy replacement. • Built-in compressor protection.
FocusPRO TH5000 Series TM This thermostat is ready to go! Your new thermostat is pre-programmed by the installer and ready to use. Just check the settings below and change if needed: 1. Fan (Auto/On): Preset to Auto..........................................To change, see page 6. Auto is the most commonly used setting, but you may prefer On for improved air circulation. 2. System (Heat/Cool/Auto/Em. Heat): Preset to Heat....To change, see page 7.
Operating Manual Quick reference to controls Digital display (see page 5) Battery holder (see page 10) Temperature Buttons Press to set preferred temperature. Function Buttons Press to select the function displayed just above each button. (Functions change depending on the task.
FocusPRO TH5000 Series TM Quick reference to display screen Low battery warning (see page 10) Inside Current inside temperature Fan setting Auto/On (see page 6) 72 Auxiliary heat (Only for heat pumps with auxiliary heat) Heat Setting Replace Battery Temperature setting 72 Auxiliary Heat On Fan Auto System Heat Function buttons Press the button beneath each function to view or change settings (functions change depending on the task) System status Heat On/Cool On (If flashing, see page 9) Syste
Operating Manual Select the fan setting Fan Auto Fan System Heat On System Heat Press the FAN button to select Auto or On. In “Auto” mode (the most commonly used setting), the fan runs only when the heating or cooling system is on. If set to “On,” the fan runs continuously. Use this setting for improved air circulation, or for more efficient air cleaning.
FocusPRO TH5000 Series TM Select the system setting Fan Auto Press the SYSTEM button to select: System Heat • Heat: Thermostat controls only the heating system. • Cool: Thermostat controls only the cooling system. Fan Auto System Cool Note: The Auto and Em Heat system settings may not appear, depending on how your thermostat was installed. • Off: Heating and cooling systems are off. • Auto: Thermostat automatically selects heating or cooling depending on the indoor temperature.
Operating Manual Auto changeover (heat/cool) Fan Auto System Auto Press until screen displays “Auto” Note: The Auto system setting may not appear, depending on how your thermostat was installed. Auto Changeover is a feature used in climates where both air conditioning and heating are used on the same day. When the system is set to Auto, the thermostat automatically selects heating or cooling depending on the indoor temperature. Heat and cool settings must be at least 3 degrees apart.
FocusPRO TH5000 Series TM Built-in compressor protection Cool Setting Inside 75 Fan Auto Cool On 75 System Message flashes until safe restart time has elapsed Cool This feature helps prevent damage to the compressor in your air conditioning or heat pump system. Damage can occur if the compressor is restarted too soon after shutdown. This feature forces the compressor to wait for a few minutes before restarting.
Operating Manual Battery replacement Press and pull to remove Replace Batttery Insert fresh alkaline batteries, then reinstall battery holder. TH5110D – AAA alkaline batteries. TH5320U/TH5220D – AA alkaline batteries. Batteries are optional (to provide backup power) if your thermostat was wired to run on AC power when installed. Install fresh batteries immediately when the REPLACE BATTERY warning begins flashing. The warning flashes about two months before the batteries are depleted.
FocusPRO TH5000 Series TM In case of difficulty If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank Temperature settings do not change • • • • Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely.
Operating Manual In case of difficulty Heating or cooling system does not respond • Press SYSTEM button to set system to Heat. Make sure the temperature is set higher than the Inside temperature. • Press SYSTEM button to set system to Cool. Make sure the temperature is set lower than the Inside temperature. Check circuit breaker and reset if necessary. Make sure power switch at heating & cooling system is on. Make sure furnace door is closed securely. Wait 5 minutes for the system to respond.
FocusPRO TH5000 Series TM Customer assistance For assistance with this product, please visit http://yourhome.honeywell.com. Or call Honeywell Customer Care toll-free at 1-800-468-1502. Accessories/replacement parts Model number xxxxxxx Date code xxxxxxx To order, please call Honeywell Customer Care tollfree at 1-800-468-1502. TH5110D Battery holder..........................Part No. 50000951-001 Cover plate assembly*............Part No. 50001137-001 Cover plate assembly*............Part No.
Operating Manual 5-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of five (5) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
FocusPRO TH5000 Series TM 5-year limited warranty This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer. Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above.
Operating Manual 5-year limited warranty THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE FIVE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Automation and Control Systems Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9 http://yourhome.honeywell.com Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. ® U.S. Registered Trademark. © 2006 Honeywell International Inc. 69-1923ES M.S.
Manual de funcionamiento Serie FocusPRO TH5000 TM Termostato digital no programable 69-1923ES
Soporte de la batería Presione el soporte y tire de él para quitar las baterías. Las baterías deben ser reemplazadas una vez al año (vea la página 10).
Serie FocusPRO TH5000 TM Acerca de su nuevo termostato Índice Acerca de su nuevo termostato Apéndice Características del termostato................... 2 Programación rápida.................................. 3 Rápida referencia de los controles............ 4 Rápida referencia de la pantalla................ 5 Reemplazo de la batería........................... 10 En caso de inconvenientes...................... 11 Asistencia al cliente.................................. 13 Accesorios y piezas de repuesto....
Manual de funcionamiento Acerca de su nuevo termostato Felicitaciones por la compra del nuevo termostato Honeywell. El termostato ha sido diseñado para brindarle muchos años de funcionamiento confiable y para brindarle un control climático fácil de usar y con sólo apretar un botón. Características • Control de temperatura al tacto. • Pantalla iluminada grande, transparente y fácil de leer, incluso en la oscuridad. • Muestra la temperatura ambiente y la configuración de la temperatura.
Serie FocusPRO TH5000 TM ¡Este termostato está listo para funcionar! Su nuevo termostato está preprogramado y listo para funcionar. Sólo revise las configuraciones de abajo y cámbielas si es necesario: 1. Ventilador (“Auto/On”): Predetermine la función “Auto”....................................................Para cambiar, vea la página 6. La función “Auto” es la configuración más usada, pero usted puede preferir “On” para una mejor circulación de aire. 2. Sistema (“Heat/Cool/Auto/Em.
Manual de funcionamiento Rápida referencia de los controles Pantalla digital (vea la página 5) Soporte de la batería (vea la página 10) Botones de la temperatura Presione para configurar la temperatura deseada. Botones de funcionamiento Presiónelos para elegir la función que se muestra justo debajo de cada botón (las funciones cambian según la tarea).
Serie FocusPRO TH5000 TM Rápida referencia de la pantalla Aviso de batería baja (vea la página 10) Inside Temperatura interior actual Configuración del ventilador “Auto/On” (vea la página 6) 72 Función “Auxiliary heat” (calor auxiliar); solamente para bombas de calor con calor auxiliar Heat Setting Replace Battery 72 Auxiliary Heat On Fan Auto System Heat Botones de funcionamiento Presione el botón detrás de cada función para ver o cambiar las configuraciones (las funciones cambian según la tarea
Manual de funcionamiento Seleccione la configuración del ventilador Fan Auto Fan System Heat On System Heat Presione el botón “FAN” para seleccionar “Auto” u “On”. En el modo “Auto”, la configuración usada comúnmente, el ventilador funciona solamente cuando la calefacción o el sistema de enfriamiento están encendidos. Si se fija en “On”, el ventilador funciona sin interrupción. Utilice este ajuste para mejorar la circulación de aire o para purificar el aire de manera eficiente.
Serie FocusPRO TH5000 TM Seleccione la configuración del sistema Fan Auto Fan Auto Presione el botón “SYSTEM” para elegir: System Heat System Cool Nota: Quizás las configuraciones del sistema “Auto” y “Em Heat” no aparezcan, según cómo haya sido instalado el termostato. • “Heat”: El termostato controla solamente el sistema de calefacción. • “Cool”: El termostato controla solamente el sistema de enfriamiento. • “Off”: Los sistemas de calefacción y enfriamiento están apagados.
Manual de funcionamiento Conversión automática (calor/frío) Fan Auto System Auto La conversión automática es una función que hace funcionar el acondicionador de aire y la calefacción en el mismo día. Cuando el sistema está configurado en “Auto”, el termostato elige automáticamente cuándo calentar o enfriar, dependiendo de la temperatura interior. Presione hasta que la pantalla muestre “Auto” Las configuraciones de calor y frío deben tener 3 grados de diferencia.
Serie FocusPRO TH5000 TM Protección del compresor incorporado Cool Setting Inside 75 Fan Auto Cool On 75 System El mensaje titila hasta que haya transcurrido el tiempo de reinicio de seguridad Cool Esta función ayuda a prevenir el daño del compresor en su acondicionador de aire o en su sistema de bomba de calor. El compresor puede dañarse si se vuelve a iniciar inmediatamente después de ser apagado. Esta característica hace que el compresor demore unos minutos antes de volver a iniciarse.
Manual de funcionamiento Reemplazo de la batería Presione y tire para quitar Replace Batttery Inserte dos baterías AA alcalinas nuevas, luego, vuelva a instalar el soporte de la batería. TH5110D: baterías AAA alcalinas. TH5320U/TH5220D: baterías AA alcalinas. Las baterías son opcionales (para ofrecer energía de respaldo) si su termostato fue conectado para energía de CA cuando fue instalado.
Serie FocusPRO TH5000 TM Acerca En casode desu inconvenientes nuevo termostato Si tiene dificultades con el termostato, intente seguir las sugerencias que se indican a continuación. La mayoría de los problemas pueden corregirse rápida y fácilmente. La pantalla está vacía • • • • Controle el interruptor de circuito y, si es necesario, reinícielo. Asegúrese de que el interruptor de energía del sistema de calefacción y enfriamiento esté encendido.
Manual de funcionamiento Acerca En casode desu inconvenientes nuevo termostato El sistema de calefacción o enfriamiento no responde • Presione el botón “SYSTEM” para configurar el sistema en “Heat”. Asegúrese de que la temperatura sea más alta que la temperatura interna. • Presione el botón “SYSTEM” para configurar el sistema en “Cool”. Asegúrese de que la temperatura sea más baja que la temperatura interna. Controle el interruptor de circuito y, si es necesario, reinícielo.
Serie FocusPRO TH5000 TM Acercaaldecliente Ayuda su nuevo termostato Para obtener asistencia relacionada con este producto, visite http://yourhome.honeywell.com. O comuníquese con el número gratuito de Atención al cliente de Honeywell 1-800-468-1502. Accesorios y piezas de repuesto Número de modelo xxxxxxx Código de la fecha xxxxxxx Para hacer el pedido, comuníquese con el número gratuito de Atención al cliente de Honeywell 1-800-468-1502. TH5110D Soporte de la batería............. N.
Manual de funcionamiento Acerca delimitada Garantía su nuevo de termostato 5 años Honeywell garantiza este producto, a excepción de la batería, por el término de cinco (5) años contra cualquier defecto de fabricación o de los materiales, a partir de la fecha de compra por parte del consumidor, en condiciones normales de uso y servicio.
Serie FocusPRO TH5000 TM Acerca delimitada Garantía su nuevo de termostato 5 años Esta garantía no cubre los costos de extracción o reinstalación. Esta garantía no se aplicará si Honeywell demuestra que el defecto o mal funcionamiento estaba causado por daños ocurridos mientras el producto estaba en posesión de un consumidor. La única responsabilidad de Honeywell será reparar o reemplazar el producto dentro de los plazos establecidos anteriormente.
Manual de funcionamiento Acerca delimitada Garantía su nuevo de termostato 5 años LA PRESENTE GARANTÍA ES LA ÚNICA GARANTÍA EXPRESA QUE HONEYWELL PROPORCIONA RESPECTO DE ESTE PRODUCTO. LA DURACIÓN DE LAS GARANTÍAS IMPLÍCITAS, INCLUIDAS LAS GARANTÍAS DE COMERCIABILIDAD Y APTITUD PARA UN OBJETIVO PARTICULAR, ESTÁ LIMITADA A LA DURACIÓN DE CINCO AÑOS DE LA PRESENTE GARANTÍA.
Sistemas para automatización y control Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9 http://yourhome.honeywell.com Impreso en los EE. UU., en papel reciclado que contiene por lo menos un 10% de fibras de papel reciclable. ® Marca registrada de los EE. UU. © 2006 Honeywell International Inc. 69-1923ES M.S.