VisionPRO 8000 Spec Sheet 2017
Table Of Contents
- Application
- Features
- Contents
- Specifications
- System Installation
- Installation Options
- Guidelines for Installing RedLINK Devices
- Installing Equipment Interface Module (if used)
- Wiring 24 Vac Common
- Selecting Discharge and Return Air Temperature Sensor Mounting Locations
- Installing Discharge and Return Air Temperature Sensors
- Selecting Thermostat Location
- Installing Wallplate
- Installing VisionPRO® 8000 with RedLINK™
- Wiring the Thermostat
- Remove Coin Cell Battery Tab
- Mounting Thermostat on Wallplate
- Power Optional RedLINK™ Accessories
- Performing Initial Setup
- Installer Tests
- Operation
- Setting the Time/Date
- Setting the Fan
- Setting System Mode
- Adjusting Program Schedules
- Overriding Schedules: Residential Use
- Overriding Schedules: Commercial Use
- Viewing Equipment Status
- Setting Vacation Hold: Residential Use
- Setting Holiday/Event Schedules: Commercial Use
- Setting Custom Events: Commercial Use
- Setting Holiday Schedule: Commercial Use
- Setting Holiday Override: Commercial Use
- Initiating Occupancy Mode: Commercial Use
- Remote Setback: Commercial Use
- Adjusting Humidification Settings
- Adjusting Dehumidification Settings: Residential Use
- Adjusting Dehumidification Settings: Commercial Use
- Adjusting Ventilation Settings
- Ventilation Options
- Setting Preferences
- Cleaning the Thermostat Screen
- Adjusting Security Settings
- Viewing Dealer Information
- Advanced Features
- Installer Options
- Using the Temperature Display
- Using the Humidity Display
- Universal Outputs (U1, U2, U3)
- Universal Inputs (S1, S2, S3, S4)
- Data Logs
- Dry Contact Alerts
- Set Up the Dry Contact Alerts
- Staging Control
- Heat Pump and Backup Heat Operation
- Indoor Air Quality (IAQ) Control
- IAQ Reminders
- Customizable Reminders
- MicroSD card
- Commercial Features
- Overriding Schedules: Commercial Use
- Setting Holiday/Event Schedules: Commercial Use
- Setting Custom Events: Commercial Use
- Setting Holiday Schedule: Commercial Use
- Setting Holiday Override: Commercial Use
- Initiating Occupancy Mode: Commercial Use
- Ramp Rates (Commercial Use)
- Remote Setback (Commercial Use)
- Economizer and Time of Day (TOD) Operation
- Pre-Occupancy Purge
- Battery Replacement
- Optional Accessories
- Portable Comfort Control
- Remote Indoor Sensors
- Replacing a Thermostat
- Replacing an Equipment Interface Module
- Wiring
- Zoning
- Troubleshooting
- Regulatory Information
VISIONPRO
®
8000 WITH REDLINK™
68-0312—05 102
Updating Thermostat Software
New thermostat software can be saved to a microSD card
and then uploaded to the VisionPRO® thermostat using the
microSD port.
1. In a web browser on your computer, go to
http://thermostatsetup.honeywell.com
2. Connect a microSD card to a USB adapter. Then con-
nect the USB adapter to your computer.
Fig. 268.
3. Download the software upgrade file to the microSD
USB adapter by clicking the indicated link on the web
site.
4. When the File Download box opens, click Save.
5. When the Save As box opens, navigate to the direc-
tory of your USB device and save the file. For exam-
ple, if your USB drive is letter “F”, navigate to “My
Computer” and then drive “F”.
6. After the file is saved, remove the microSD card from
the adapter and connect it to the thermostat. Then
select the “Software Update” option on the thermo-
stat.
Fig. 269.
7. See “To Use the MicroSD Card in the Thermostat” on
page 102.
Loading Dealer Information
VisionPRO thermostats can display the dealer's contact
information on the screen, making it easy for users to
contact them for post-sale support and service. After
saving the dealer's contact information to a microSD card,
the dealer can upload this information to the VisionPRO
thermostat using the microSD port.
1. In a web browser on your computer, go to
http://thermostatsetup.honeywell.com
2. Enter your dealer information into the text boxes pro-
vided on the web site.
3. Connect a microSD card to a USB adapter. Then con-
nect the USB adapter to your computer. See Fig. 268.
4. Download the dealer information file to the microSD
USB adapter by clicking the indicated link on the web
site.
5. When the File Download box opens, click Save.
6. When the Save As box opens, navigate to the direc-
tory of your USB device and save the file. For exam-
ple, if your USB drive is letter “F,” navigate to “My
Computer” and then drive “F.”
7. After the file is saved, remove the microSD card from
the adapter and connect it to the thermostat. See Fig.
269. Then select the “Dealer Information” option on
the thermostat.
8. See “To Use the MicroSD Card in the Thermostat” on
page 102.
To Use the MicroSD Card in the
Thermostat
1. Slide card into the bottom of thermostat. See Fig.
269.
2. Select the item to load or save.
Fig. 270.
3. Follow the prompts on the screen.
• To add information from the card to the
thermostat, select Load from SD Card.
• To put thermostat information on the card, select
Save to SD Card.
Fig. 271.
4. When you are finished, touch Done, then Home, and
remove the microSD card.
Computer
USB Adapter
MicroSD Card
Scroll to see:
Installer Setup
Dealer Information
Holiday Schedule
Custom Reminders
Data Logs
Software Update