VisionPRO 8000 Spec Sheet 2017
Table Of Contents
- Application
- Features
- Contents
- Specifications
- System Installation
- Installation Options
- Guidelines for Installing RedLINK Devices
- Installing Equipment Interface Module (if used)
- Wiring 24 Vac Common
- Selecting Discharge and Return Air Temperature Sensor Mounting Locations
- Installing Discharge and Return Air Temperature Sensors
- Selecting Thermostat Location
- Installing Wallplate
- Installing VisionPRO® 8000 with RedLINK™
- Wiring the Thermostat
- Remove Coin Cell Battery Tab
- Mounting Thermostat on Wallplate
- Power Optional RedLINK™ Accessories
- Performing Initial Setup
- Installer Tests
- Operation
- Setting the Time/Date
- Setting the Fan
- Setting System Mode
- Adjusting Program Schedules
- Overriding Schedules: Residential Use
- Overriding Schedules: Commercial Use
- Viewing Equipment Status
- Setting Vacation Hold: Residential Use
- Setting Holiday/Event Schedules: Commercial Use
- Setting Custom Events: Commercial Use
- Setting Holiday Schedule: Commercial Use
- Setting Holiday Override: Commercial Use
- Initiating Occupancy Mode: Commercial Use
- Remote Setback: Commercial Use
- Adjusting Humidification Settings
- Adjusting Dehumidification Settings: Residential Use
- Adjusting Dehumidification Settings: Commercial Use
- Adjusting Ventilation Settings
- Ventilation Options
- Setting Preferences
- Cleaning the Thermostat Screen
- Adjusting Security Settings
- Viewing Dealer Information
- Advanced Features
- Installer Options
- Using the Temperature Display
- Using the Humidity Display
- Universal Outputs (U1, U2, U3)
- Universal Inputs (S1, S2, S3, S4)
- Data Logs
- Dry Contact Alerts
- Set Up the Dry Contact Alerts
- Staging Control
- Heat Pump and Backup Heat Operation
- Indoor Air Quality (IAQ) Control
- IAQ Reminders
- Customizable Reminders
- MicroSD card
- Commercial Features
- Overriding Schedules: Commercial Use
- Setting Holiday/Event Schedules: Commercial Use
- Setting Custom Events: Commercial Use
- Setting Holiday Schedule: Commercial Use
- Setting Holiday Override: Commercial Use
- Initiating Occupancy Mode: Commercial Use
- Ramp Rates (Commercial Use)
- Remote Setback (Commercial Use)
- Economizer and Time of Day (TOD) Operation
- Pre-Occupancy Purge
- Battery Replacement
- Optional Accessories
- Portable Comfort Control
- Remote Indoor Sensors
- Replacing a Thermostat
- Replacing an Equipment Interface Module
- Wiring
- Zoning
- Troubleshooting
- Regulatory Information
VISIONPRO
®
8000 WITH REDLINK™
21 68-0312—05
Thermostat Password (Date Code)
Fig. 59. Locate password.
The following options are available when you access
Installer Options. For more information on each, press Help
on the thermostat or see Table 1.
Fig. 60.
NOTE: You can use the thermostat microSD port to down-
load all Installer Setup settings, including your
company name and contact information. You can
upload this data to each thermostat you install, to
save time.
Make Changes to Installer Setup
NOTE: Use a microSD card to save set up time. See “To
Use the MicroSD Card in the Thermostat” on
page 102.
1. Touch Menu.
2. Select Installer Options.
Fig. 61.
3. Enter password (date code) and touch Done. See
“Finding Your Password (Date Code) to Access
Installer Options” beginning on page 20 for more
information.
Residential/Résidentiel
1-800-468-1502
http://yourhome.honeywell.com
Commercial/Commerciale
1-888-245-1051
http://customer.honeywell.com
Honeywell, Golden Valley, MN 55422
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
TH8321R1001
1
1324
Residential/Résidentiel
1-800-468-1502
http://yourhome.honeywell.com
Commercial/Commerciale
1-888-245-1051
http://customer.honeywell.com
Honeywell, Golden Valley, MN 55422
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
TH8321R1001
1
1324
Password
(Date Code)
Scroll to see:
Installer Setup
Installer Test
Data Logs
Wireless Manager
Reset To Defaults
Device Info
Table 1. Installer Options.
Menu Item Description
Installer Setup Select INSTALLER SETUP to set system
settings one by one.
Installer Test Select INSTALLER TEST to quickly
determine if the heat, cool, fan and
thermostat are operating properly.
Minimum off timers are ignored during
the test.
Data Logs Select DATA LOGS to turn off/on the
Alerts Log or Interaction Log.
Wireless
Manager
Select WIRELESS MANAGER to add,
remove, rename or view the connected
wireless accessories.
Reset To
Defaults
Select RESET TO DEFAULTS to place all
thermostat settings back to the factory
settings.
Note: If the thermostat has been setup
WITHOUT an Equipment Interface
Module or the TrueZONE Wireless
Adapter and you would like to add one,
you must reset the thermostat back to
factory defaults.
Device Info For Honeywell use only.
MCR33976
Installer Options