VisionPRO 8000 Spec Sheet 2017
Table Of Contents
- Application
- Features
- Contents
- Specifications
- System Installation
- Installation Options
- Guidelines for Installing RedLINK Devices
- Installing Equipment Interface Module (if used)
- Wiring 24 Vac Common
- Selecting Discharge and Return Air Temperature Sensor Mounting Locations
- Installing Discharge and Return Air Temperature Sensors
- Selecting Thermostat Location
- Installing Wallplate
- Installing VisionPRO® 8000 with RedLINK™
- Wiring the Thermostat
- Remove Coin Cell Battery Tab
- Mounting Thermostat on Wallplate
- Power Optional RedLINK™ Accessories
- Performing Initial Setup
- Installer Tests
- Operation
- Setting the Time/Date
- Setting the Fan
- Setting System Mode
- Adjusting Program Schedules
- Overriding Schedules: Residential Use
- Overriding Schedules: Commercial Use
- Viewing Equipment Status
- Setting Vacation Hold: Residential Use
- Setting Holiday/Event Schedules: Commercial Use
- Setting Custom Events: Commercial Use
- Setting Holiday Schedule: Commercial Use
- Setting Holiday Override: Commercial Use
- Initiating Occupancy Mode: Commercial Use
- Remote Setback: Commercial Use
- Adjusting Humidification Settings
- Adjusting Dehumidification Settings: Residential Use
- Adjusting Dehumidification Settings: Commercial Use
- Adjusting Ventilation Settings
- Ventilation Options
- Setting Preferences
- Cleaning the Thermostat Screen
- Adjusting Security Settings
- Viewing Dealer Information
- Advanced Features
- Installer Options
- Using the Temperature Display
- Using the Humidity Display
- Universal Outputs (U1, U2, U3)
- Universal Inputs (S1, S2, S3, S4)
- Data Logs
- Dry Contact Alerts
- Set Up the Dry Contact Alerts
- Staging Control
- Heat Pump and Backup Heat Operation
- Indoor Air Quality (IAQ) Control
- IAQ Reminders
- Customizable Reminders
- MicroSD card
- Commercial Features
- Overriding Schedules: Commercial Use
- Setting Holiday/Event Schedules: Commercial Use
- Setting Custom Events: Commercial Use
- Setting Holiday Schedule: Commercial Use
- Setting Holiday Override: Commercial Use
- Initiating Occupancy Mode: Commercial Use
- Ramp Rates (Commercial Use)
- Remote Setback (Commercial Use)
- Economizer and Time of Day (TOD) Operation
- Pre-Occupancy Purge
- Battery Replacement
- Optional Accessories
- Portable Comfort Control
- Remote Indoor Sensors
- Replacing a Thermostat
- Replacing an Equipment Interface Module
- Wiring
- Zoning
- Troubleshooting
- Regulatory Information
VISIONPRO
®
8000 WITH REDLINK™
68-0312—05 64
Fig. 101.
Setting Holiday/Event Schedules:
Commercial Use
This feature helps you conserve energy when the
workplace is unoccupied for special events and holidays.
1. Touch MENU.
Fig. 102.
2. Select Holiday Schedule.
Fig. 103.
3. Select the item you want to schedule and touch Next
for further scheduling details.
• Custom Events lets you set up other days for
special schedules.
• US and Canadian Holiday options let you select
from a list of holidays commonly observed in each
country.
Fig. 104.
4. Make selections as prompted on each screen. For
more information, see next two pages.
5. Touch Done to save your settings.
Setting Custom Events: Commercial
Use
This feature lets you customize temperature settings to be
maintained during a specific event. You can set up an event
for a specific date or day in a month. The thermostat
resumes normal scheduling after the event. The
thermostat can be scheduled for up to 25 Custom Events.
1. Select Custom Events from the Holiday Schedule
menu.
Fig. 105.
2. Select Create New Event.
Fig. 106.
3. Select Specific Date or Month/Weekday.
• For Specific Date, you are prompted to select the
event’s start date, settings, end date, and
frequency.
• For Month/Weekday, you are prompted to select
the month, day of the week, week of the month,
settings, length of event, and frequency for the
event.
Fig. 107.
4. Review the settings and touch Done to save them.
Touch Cancel to ignore the changes.
MCR34112
Jul 25 - Jul 26
Heat: 72 Cool: 78
MCR34100
MCR34113
Holiday Schedule
Holiday Mode
MCR34114
Custom Events
US Holidays
MCR34114
Custom Events
US Holidays
MCR34116
Create New Event
MCR34117
Select Occurence
Specific Date