User Guide VisionPRO Wi-Fi Programmable Thermostat Model TH8320WF
In the box you will find • Quick Start Guide • Thermostat ID Card • User Guide 69-2715EF—01 ii
Welcome Congratulations on your purchase of a Honeywell Wi-Fi touchscreen programmable thermostat. When registered to Honeywell’s Total Connect Comfort Solutions, you can remotely monitor and control the heating and cooling system in your home or business—you can stay connected to your comfort system wherever you go.
69-2715EF—01 2
Table of contents About your new thermostat Unregistering thermostat........................... 27 Disconnecting Wi-Fi................................... 28 Special features......................................... 29 Setting functions and options..................... 30 Home screen quick reference...................... 5 Message center messages.......................... 6 Connecting to your Wi-Fi network................ 8 Registering your thermostat online............ 13 Preset energy-saving schedules...
Features of your Wi-Fi thermostat With your new thermostat, you can: • Connect to the Internet to monitor and control your heating/cooling system • View and change your heating/cooling system settings • View and set temperature and schedules • Receive alerts via email and get automatic upgrades Your new thermostat provides: • Adaptive Intelligent Recovery (AIR) - the thermostat learns your system so it can turn the heat or cool on early to reach your desired temperature at your desired time.
Home screen quick reference Once your Wi-Fi thermostat is installed, it will display the home screen. Portions of this display will change depending on how you are viewing it. To change settings, simply press the appropriate area lightly with your finger.
Message center messages The Message Center at the top of the screen communicates Wi-Fi connection and registration status. It also displays the MAC ID and MAC CRC for registering the thermostat at mytotalconnectcomfort.com Displayed before you begin Wi-Fi setup. Displayed while connecting to the Wi-Fi network. Displayed after connecting to the Wi-Fi network. [Wi-Fi network name] Displayed when connected to the Wi-Fi network. Displayed when Wi-Fi connection is complete.
Message center messages Displayed when the thermostat is registered at mytotalconnectcomfort.com Displayed when the thermostat is removed from your Total Connect Comfort account. Wi-Fi signal strength. Displayed when the thermostat is connected to the Wi-Fi network and registered at mytotalconnectcomfort.com Displayed if there is no Wi-Fi signal. Displayed if the home Wi-Fi password is entered incorrectly. Displayed if no IP Address is supplied by the router. Displayed if there is no Wi-Fi signal.
Connecting to your Wi-Fi network Connect your wireless device to your home network. Any of these device types will work: • Tablet (recommended) • Laptop (recommended) • Smartphone If you get stuck... At any point in this process, restart the thermostat by removing the thermostat from the wallplate, wait for 5 seconds, and snap it back into place. Go to Step 1 in this procedure, starting on page 9. View the Wi-Fi Enrollment video at wifithermostat.
Connecting to your Wi-Fi network 1 Connect to your thermostat. Message Center 1a Make sure the thermostat message center displays Wi-Fi SETUP 1c Connect to the network called NewThermostat_123456 (the number will vary). Inside MORE M31566 1b On the wireless device (tablet, laptop, smartphone), view the list of available Wi-Fi networks. Note: If you are asked to specify a home, public, or office network, select Home Network.
Connecting to your Wi-Fi network 2 Join your home network. 2a Open your web browser to access the Thermostat Wi-Fi Setup page. The browser should automatically direct you to the correct page; if it does not, go to http://192.168.1.1 2b Find the name of your home network on this page and select it. 2c Complete the instructions for joining your Wi-Fi network and click on the Connect button. (Depending on your network setup, you may see an instruction such as Enter Password for your home network.
Connecting to your Wi-Fi network Note: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup page: • Try performing a network rescan by pressing the Rescan button. This is helpful in areas with a lot of networks. • If you are connecting to a hidden network, then enter the network SSID in the textbox, select the encryption type from the drop down menu, and click on the Add button. This manually adds the network to the top of the list.
Connecting to your Wi-Fi network 3 Make sure your thermostat is connected. The message center on your thermostat will now display CONNECTING… for up to 30 seconds. 3a Look at the thermostat display. Verify that the message center displays one of the following: CONNECTION SUCCESSFUL JOINED: [WI-FI NETWORK NAME] YOU ARE ALMOST DONE REGISTER AT TOTAL CONNECT If you don’t see these messages, see page 8. To register online for remote access to your thermostat continue on page 13.
Registering your thermostat online To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Follow the instructions below. View the Wi-Fi Thermostat Registration video at wifithermostat.com/videos 1 Open the Total Connect Comfort web site. M31570 Go to www.mytotalconnectcomfort.
Registering your thermostat online 2 Login or create an account. If you have an account, click Login – or – click Create An Account 2a Follow the instructions on the screen. M31571 2b Check your email for a response from My Total Connect Comfort. This may take several minutes. Note: If you do not receive a response, check your junk mailbox or use an alternate e-mail address. 2c Follow activation instructions in the email. 2d Log in.
Registering your thermostat online 3 Register your Wi-Fi thermostat. After you are logged in to your Total Connect Comfort account, register your thermostat. 3a Follow the instructions on the screen. After adding your thermostat location, you must enter the thermostat’s unique identifiers: • MAC ID • MAC CRC Note: These IDs are listed on the Thermostat ID Card included in the thermostat package. The IDs are not case sensitive.
Registering your thermostat online 3b Notice that when the thermostat is successfully registered, the Total Connect Comfort registration screen will display a SUCCESS message.
Preset energy-saving schedules This thermostat is pre-set with energy-saving program settings for four time periods. Using the default settings can reduce your heating/cooling expenses by as much as 33% if used as directed. Savings may vary depending on geographic region and usage. WAKE 6:00 am LEAVE 8:00 am RETURN 6:00 pm SLEEP 10:00 pm Default Heat Settings Default Cool Settings 70 ° 78 ° 62 ° 85 ° 70 ° 78 ° 62 ° 82 ° To change the settings, see pages 21–24.
Setting the clock 1 Press CLOCK to display setting arrows. 2 Press s or t to adjust the time. (You can advance the time more quickly by holding the s or t buttons.) 3 Press DONE to save and exit (or press CANCEL to exit without changing the time). Note: You should never need to adjust the real-time clock; it automatically updates for daylight saving time and all date/time information is stored. Note: To change the current week day format, see “Setting functions and options” on page 30.
Setting the fan 1 Press FAN to select fan operation. 3 Press DONE to save setting. Your selection appears under FAN. ON: Fan is always on. AUTO: Fan runs only when the heating or cooling system is on. CIRC: Fan runs randomly approximately 35% of the time. Use this setting for improved air circulation or for more efficient central air cleaning when you do not want the fan running continuously. 19 Inside MORE MCR31582 2 Press FAN again to select ON or AUTO (toggle to re-select).
Selecting system mode 1 Press SYSTEM to display options. 2 Press SYSTEM again to select an option. You may need to press two or three times to make a selection—the selected option blinks. Inside Possible system modes: HEAT: Controls only the heating system. COOL: Controls only the cooling system. OFF: Heating/cooling systems are off. AUTO: Selects heating or cooling depending on the indoor temperature. EM HEAT (heat pumps with aux. heat): Controls auxiliary/emergency heat. Compressor is locked out.
Adjusting program schedules 1 Press SCHED, then EDIT. Screen displays day buttons at top. 2 Press day buttons (MON–SUN) to select days. MORE SLEEP 3 Press s or t to set Wake time for selected day(s). 4 Press s or t to set Heat and Cool temperature for this time period. 5 Press another period (LEAVE, RETURN, SLEEP) and set time and temperatures for each. Note: You can press CANCEL PERIOD to eliminate any unwanted time period.
Overriding schedules temporarily 1 On the home screen, press s or t to immediately adjust the temperature. The new setting will be maintained until the time shown under Hold Until. When the timer expires, the schedule will resume, and the temperature will return to the setting for the current time period. To cancel the temporary setting at any time, press CANCEL (or SCHED). The program schedule will resume.
Overriding schedules permanently 1 Press HOLD to permanently adjust the temperature. This will turn off the program schedule. 2 Whatever temperature you set will be maintained 24 hours a day until you manually change it or press CANCEL (or SCHED) to cancel “Hold” and resume the program schedule.
Setting vacation hold Use this function to suspend the program schedule while you are away for an extended period. Inside 1 Press s or t to set the temperature. 2 Press s or t to set the time of day you want the schedule to resume on the day you return. Hold Until MORE 3 Press HOLD twice. Hold Until appears. 4 Press s or t to select the number of days. Note: You can press CANCEL (or SCHED) to resume normal schedule.
Setting filter reminder intervals If activated during installation, the filter reminder alerts you with a message above the time when it is time to replace your filter. Press RESET after changing the filter, to restart the timer. Inside RESET CHANGE FILTER To change the reminder interval: MORE 1 Press MORE, then EDIT. SLEEP 2 Press s or t to select the desired interval (in days), then press DONE. DAYS 3 Press RESET. Note: System setting function 0500 governs the filter interval.
Cleaning the screen 1 Press SCREEN to lock the screen for cleaning. The screen will remain locked for 30 seconds so you can clean the screen without changing any settings. MORE 2 After 30 seconds, press DONE to resume normal operation, or press SCREEN again if you require more time for cleaning. MCR31560 Note: Do not spray any liquid directly on the thermostat. Spray liquid onto a cloth, then use the damp cloth to clean the screen. Use water or household glass cleaner. Avoid abrasive cleansers.
Unregistering thermostat If you remove the thermostat from your Total Connect Comfort website account (for example, you’re moving and leaving the thermostat behind), the message center will scroll UNREGISTERED FROM TOTAL CONNECT for 3 minutes. After that, it will alternate displaying REGISTER AT TOTAL CONNECT, the MAC ID and the MAC CRC.
Disconnecting Wi-Fi If you disconnect the thermostat from your Wi-Fi network (for example, you’re replacing your router): 1 Enter system setup (see page 30). Inside The Message Center will display Wi-Fi DISCONNECTED for 1 minute. MORE After that it will display Wi-Fi SETUP. 69-2715EF—01 28 M31573 2 Change setting 900 to 0 (see page 35).
Special features Adaptive Intelligent Recovery (AIR) This feature allows the thermostat to “learn” how long the heating/cooling system takes to reach programmed temperature settings, so the temperature is reached at the time you set. For example: Set the Wake time to 6:00 am, and the temperature to 70°. The heat will come on before 6:00 am, so the temperature is 70° by 6:00 am. The message “Recovery” is displayed when the system is activated before a scheduled time period.
Setting functions and options You can change options for a number of system functions. Available functions depend on the type of system you have. The functions, designated with four-digit numbers, along with available options are described on pages 31–35. This thermostat is pre-set for a single-stage heating/cooling system. Setting function 0170 for a heat pump will adjust the default settings. 69-2715EF—01 30 HEAT 6:30 PM DONE CANCEL 0120 DONE 20 MCR31562 SYSTEM MCR31563 1 Press SYSTEM.
User setup Function 0112 Settings & Options 52 = Thermostat Device Name 1 Basement 18 Fireplace 35 Media Room This name will 2 Bathroom 19 Foyer 36 Music Room identify the 20 Game Room 37 Nursery thermostat when you 3 Bathroom 1 4 Bathroom 2 21 Garage 38 Office view it remotely. 5 Bathroom 3 22 Great Room 39 Office 1 If you register 6 Bedroom 23 Guest Room 40 Office 2 multiple thermostats, 7 Bedroom 1 24 Gym 41 Pantry give each one a 8 Bedroom 2 25 Kid's Room 42 Play Room different name.
User setup Function Settings & Options 0120 Year Setting (first two digits) 20 = Year 20xx 21 = Year 21xx 0130 Year Setting (last two digits) 01–99 (i.e., 2001–2099) 0140 Month Setting 01–12 (i.e., January–December) 0150 Date Setting 01–31 0160 Schedule Options 4 0 Program schedule is on (7-day programmable). Program schedule is off. Thermostat can not be programmed. 0165 Restore Schedule Defaults 0 1 Continue using programmed schedule.
User setup Function Settings & Options 0 1 0320 Temperature Format (°F/°C) 0330 Automatic Daylight 0 1 Saving Time Adjustment 0500 Filter Change Reminder The reminder appears after selected number of days run time not actual time.
User setup Function Settings & Options 0510 Humidifier Pad Replacement Reminder 0 1 2 3 Disabled 30-day run time (about 3 months) 60-day run time (about 6 months) 90-day run time (about 9 months) 0520 UV Lamp Replacement Reminder 0 1 2 Disabled 365 days 730 days 0530 Adaptive Intelligent 1 0 Recovery (AIR) 0640 Clock Format 69-2715EF—01 On Off 12 12-hour clock (i.e., “3:30 pm”) 24 24-hour clock (i.e.
User setup Function Settings & Options 0670 Keypad lock 0 1 2 Keypad unlocked (fully functional) Partially locked (access to temperature settings only) Fully locked 0710 Restore Original Settings 0 1 No Disconnects thermostat from Wi-Fi and restores original settings (erases customizations). 0890 Wi-Fi On/Off 1 0 Wi-Fi is on and can be connected to a Wi-Fi network. Wi-Fi is off. Thermostat cannot be connected to a Wi-Fi network.
Frequently asked questions QQ: Will my thermostat still work if I lose my Wi-Fi connection? AA: Yes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi. QQ: How do I find the password to my router? AA: Contact the manufacturer of the router or check the router documentation. QQ: Why am I not seeing my Wi-Fi setup page? AA: You are probably connected only to your router, not to your thermostat. Try connecting to the thermostat again.
Frequently asked questions QQ: Where can I find my MAC ID and MAC CRC codes? AA: The MAC ID and MAC CRC will show in the message center of the thermostat. The numbers are also included on a card packed with the thermostat or on the back of the thermostat (visible when removed from wallplate). Each thermostat has a unique MAC ID and MAC CRC. QQ: My thermostat is unable to register to the Total Connect Comfort website. AA: Verify that the thermostat is correctly enrolled on your homeWi-Fi network.
Frequently asked questions QQ: I registered on the Total Connect Comfort website but was unable to login using my new account. AA: Check your email and ensure that you received an activation email. Follow the instructions to activate your account and then login to the website. QQ: I have signed up on Total Connect Comfort website and have not received a confirmation email. AA: Check for the email in your Junk or Deleted folder.
Troubleshooting If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • Check circuit breaker and reset if necessary. • Make sure power switch at heating and cooling system is on. • Make sure furnace door is closed securely. “Wait” appears on the screen • Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor.
Troubleshooting Heating or cooling system does not respond • Press SYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature. • Press SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature. • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure furnace door is closed securely. • If “Wait” is displayed, the compressor protection timer is on.
Glossary MAC ID, MAC CRC Alphanumeric codes that uniquely identify your thermostat. QR Code Quick response code. A two-dimensional,machine-readable image. Your wireless device can read the black and white pattern in the square and link its browser directly to a web site. QR Code is a registered trademark of DENSO WAVE INCORPORATED.
Regulatory information FCC Compliance Statement (Part 15.19) (USA only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. FCC Warning (Part 15.
Regulatory information Section 7.1.3 of RSS-GEN Operation is subject to the following two conditions: 1 this device may not cause interference, and 2 this device must accept any interference, including interference that may cause undesired operation of the device.
5-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of five (5) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
69-2734-01 Automation and Control Systems Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 http://yourhome.honeywell.com ® U.S. Registered Trademark. Apple, iPhone, iPad, iPod touch and iTunes are trademarks of Apple Inc. All other trademarks are the property of their respective owners. © 2012 Honeywell International Inc. 69-2734—01 M.S. 08-12 Printed in U.S.A.