Quick Start Guide

Connect it to your home Wi-Fi network.
Register online for remote access.
Before you begin, you may want to view our
installation video by scanning this QR
®
Code
specification or visiting wifithermostat.com
Setting Up Your Thermostat
1
2
69-2735EF-01
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
http://yourhome.honeywell.com
® U.S. Registered Trademark.
© 2012 Honeywell International Inc.
69-2735EF—01 M.S. 08-12
Printed in U.S.A.
Apple, iPhone, iPad, iPod touch and iTunes are
trademarks of Apple Inc. All other trademarks
are the property of their respective owners.
Quick Start Guide
VisionPRO Wi-Fi
Programmable
Thermostat
Model TH8320WF
If you get stuck... At any point in
this process, restart the thermostat
by removing the thermostat from
the wallplate, wait for 5 seconds,
and snap it back into place.
Return to 1.1
.
Need more help? Find additional
information in the User Guide.
Getting Help
1.1 Connect to your thermostat
1.1a Connect your wireless device to
your home network.
Any of these device types
will work:
  • Tablet(recommended)
  • Laptop(recommended)
  • Smartphone
View the Wi-Fi Enrollment video
at wifithermostat.com/videos
Connect to your Wi-Fi network
1
1.2 Join your home network
1.2a Open your web browser to access
the Thermostat Wi-Fi Setup page.
The browser should automatically
direct you to the correct page; if it
does not, go to http://192.168.1.1
1.2b
Find the name of your home network
on this page and select it.
Note: Some routers have enhanced
features such as guest networks; use
your home network.
1.2c Complete the instructions for joining
your Wi-Fi network and click on the
Connectbutton.(Dependingonyour
network setup, you may see an
instruction such as Enter Password
   foryourhomenetwork.)
Note: If you did not correctly connect to
the thermostat, you may see your home
router page. If so, return to Step 1.1.
Thermostat Wi-Fi-Setup page
M31566
MORE
Inside
1.1b Make sure the thermostat message
center displays Wi-Fi SETUP.
 1.1c Onthewirelessdevice(tablet,
  laptop,smartphone),viewthe 
list of available Wi-Fi networks.
1.1d Connect to the network called
NewThermostat_123456
  (thenumberwillvary).
Note: If you are asked to specify a home,
public, or office network, select
Home Network.
Message Center
1.3 Make sure your thermostat is
connected
The message center on your thermostat
will now display CONNECTING… for up to
30 seconds.
1.3a Lookatthethermostatdisplay.
Verify that the message center
displays one of the following:
   CONNECTIONSUCCESSFUL
JOINED: [WI-FI NETWORK NAME]
   YOUAREALMOSTDONE
   REGISTERATTOTALCONNECT
If you see one of these messages,
continue to Step 2 .
M31568
MORE
Inside
Note: If you see CONNECTION
FAILUREorWi-FiSETUPin
the message center, confirm
you correctly entered your home
network password in step 1.2c. If
correct, refer to the FAQ at
wifithermostat.com/support
® U.S. Registered Trademark.
© 2012 Honeywell International Inc.
69-2723EFS—01 M.S. 04-12
Printed in U.S.A.
HONEYWELL MODEL: TH8320WF
MAC ID: MAC CRC:
69-2723EFS-01
Thermostat ID Card
Use the MAC ID and CRC ID to register
this product at mytotalconnectcomfort.com
Carte d’identification de thermostat
Utilisez l’identication MAC et l’identication CRC pour
enregistrer ce produit à mytotalconnectcomfort.com
Tarjeta de identificación del termostato
Utilice la identicación MAC y la identicación CRC para
inscribir este producto en mytotalconnectcomfort.com
To view and set your Wi-Fi thermostat remotely,
you must have a Total Connect Comfort
account. Follow the instructions below.
View the Wi-Fi Thermostat Registration
video at wifithermostat.com/videos
2.1 Open the Total Connect Comfort
web site
Go to www.mytotalconnectcomfort.com
Register online for remote access
2
2.2 Login or create an account
If you have an account,
click Login
– or –
click Create An Account.
2.2a Follow the instructions on the
screen.
2.2b Check your email for a response
from My Total Connect Comfort.
This may take several minutes.
Note: If you do not receive a response,
check your junk mailbox or use an
alternate e-mail address.
2.2c Follow activation instructions in
the email.
 2.2d Login.
MAC ID MAC CRC
2.3b Notice that when the thermostat
is successfully registered, the
Total Connect Comfort
registration screen will display
a SUCCESS message.
In the thermostat message
center you will see:
  CONGRATULATIONS
  SETUPCOMPLETE!
2.3 Register your Wi-Fi thermostat
After you are logged in to your Total
Connect Comfort account, register
your thermostat.
2.3a Follow the instructions on
the screen. After adding
your thermostat location
you must enter your
thermostat’s unique
identifiers:
  • MACID
  • MACCRC
Note: These IDs are listed on the
Thermostat ID Card included
in the thermostat package.
The IDs are not case sensitive.
2.3c Also notice that your thermostat
will now display its signal strength.
  Congratulations!You’redone.
You can now control your
thermostat from anywhere
through your tablet, laptop, or
smartphone.
Total Connect Comfort free app
is available for Apple
®
iPhone
®
,
iPad
®
and iPod touch
®
devices
at iTunes
®
or at Google Play
®
for all Android
™
devices.
GET IT ON
Download on
iTunes