VisionPRO 8000 Spec Sheet 2017
Table Of Contents
- Application
- Features
- Contents
- Specifications
- System Installation
- Installation Options
- Guidelines for Installing RedLINK Devices
- Installing Equipment Interface Module (if used)
- Wiring 24 Vac Common
- Selecting Discharge and Return Air Temperature Sensor Mounting Locations
- Installing Discharge and Return Air Temperature Sensors
- Selecting Thermostat Location
- Installing Wallplate
- Installing VisionPRO® 8000 with RedLINK™
- Wiring the Thermostat
- Remove Coin Cell Battery Tab
- Mounting Thermostat on Wallplate
- Power Optional RedLINK™ Accessories
- Performing Initial Setup
- Installer Tests
- Operation
- Setting the Time/Date
- Setting the Fan
- Setting System Mode
- Adjusting Program Schedules
- Overriding Schedules: Residential Use
- Overriding Schedules: Commercial Use
- Viewing Equipment Status
- Setting Vacation Hold: Residential Use
- Setting Holiday/Event Schedules: Commercial Use
- Setting Custom Events: Commercial Use
- Setting Holiday Schedule: Commercial Use
- Setting Holiday Override: Commercial Use
- Initiating Occupancy Mode: Commercial Use
- Remote Setback: Commercial Use
- Adjusting Humidification Settings
- Adjusting Dehumidification Settings: Residential Use
- Adjusting Dehumidification Settings: Commercial Use
- Adjusting Ventilation Settings
- Ventilation Options
- Setting Preferences
- Cleaning the Thermostat Screen
- Adjusting Security Settings
- Viewing Dealer Information
- Advanced Features
- Installer Options
- Using the Temperature Display
- Using the Humidity Display
- Universal Outputs (U1, U2, U3)
- Universal Inputs (S1, S2, S3, S4)
- Data Logs
- Dry Contact Alerts
- Set Up the Dry Contact Alerts
- Staging Control
- Heat Pump and Backup Heat Operation
- Indoor Air Quality (IAQ) Control
- IAQ Reminders
- Customizable Reminders
- MicroSD card
- Commercial Features
- Overriding Schedules: Commercial Use
- Setting Holiday/Event Schedules: Commercial Use
- Setting Custom Events: Commercial Use
- Setting Holiday Schedule: Commercial Use
- Setting Holiday Override: Commercial Use
- Initiating Occupancy Mode: Commercial Use
- Ramp Rates (Commercial Use)
- Remote Setback (Commercial Use)
- Economizer and Time of Day (TOD) Operation
- Pre-Occupancy Purge
- Battery Replacement
- Optional Accessories
- Portable Comfort Control
- Remote Indoor Sensors
- Replacing a Thermostat
- Replacing an Equipment Interface Module
- Wiring
- Zoning
- Troubleshooting
- Regulatory Information
VISIONPRO
®
8000 WITH REDLINK™
103 68-0312—05
COMMERCIAL FEATURES
The thermostat can be setup for residential or light
commercial applications (ISU 101). When the thermostat is
setup for commercial, the thermostat meets commercial
code, Title 24 and provides the following features:
• Commercial language (occupied and unoccupied)
• Temporary override (permanent hold is not allowed)
• Temporary override duration is limited to the amount set
by the installer
• Guide me through scheduling
• Adjustable ramp rates
• 365 holiday schedule
• Schedule up to 25 custom events
• Initiate occupancy
• Remote setback using an occupancy sensor
• Economizer or Time of Day output
• Pre-occupancy purge
• Additional dehumidification control options
Fig. 272.
Overriding Schedules: Commercial
Use
Touch or to adjust the temperature. It will be
maintained until the hold time you set.
• To change the hold time, touch the Hold Until arrow
buttons. This time can be adjusted up to the maximum
time set by the installer.
Fig. 273.
• Touch Override to use a pre-set occupied temperature if
a person uses the room during an unoccupied period.
The new temperature will be maintained for 1 hour and
can be adjusted up to the maximum time set by the
installer.
Fig. 274.
The programmed schedule will resume when the override
timer expires. Touch Cancel Hold at any time to resume the
program schedule.
Setting Holiday/Event Schedules:
Commercial Use
This feature helps you conserve energy when the
workplace is unoccupied for special events and holidays.
1. Touch MENU.
Fig. 275.
2. Select Holiday Schedule.
Fig. 276.
3. Select the item you want to schedule and touch Next
for further scheduling details.
• US and Canadian Holiday options let you select
from a list of holidays commonly observed in each
country.
• Custom Events lets you set up other days for
special schedules.
MCR34169
MCR34106
MCR34100
MCR34113
Holiday Schedule
Holiday Mode