Installation Manual

9 69-2815EFS—01
Setting advanced preferences
1 Touch MENU. The thermostat displays a
list of options.
2 Select Preferences > Advanced Preferences.
The thermostat displays the first screen of
options that you can change.
3 On each screen, make changes as needed,
then touch Next to display new options.
Repeat this step until you have made all
changes.
4 When you have made all changes, press
Done to save and exit.
MENU
Preferences
Advanced Preferences
Next
Screen Title Settings and Options
Scheduling Options
Select Non-programmable or Programmable. Programmable uses
default or customized programming to automatically raise and lower
temperature settings for different times of day.
Temperature Indication
Scale
Select Fahrenheit or Celsius.
Heating and Cooling System
Changeover
Select Manual or Automatic.
Number of Schedule Periods Select 2 Periods Per Day or 4 Periods Per Day.
Pre-occupancy Purge
Duration *
Select how long the fan will run before each occupied period: Off, 1,
2, or 3 hours.
Type of Override *
Select Standard to maintain the programmed periods or Initiate
Occupancy to use energy-saving settings until a user presses Start
Occupancy.
Override Duration *
Select how long to maintain temperature during an override: 1-10
hours or No Limit.
Early Recovery for Heating *
Select No to begin recovery on schedule or Yes to ramp up
temperature early.
Early Recovery for Cooling *
Select No to begin recovery on schedule or Yes to ramp down
temperature early.
Temperature Limits Select the Minimum Cool and Maximum Heat Limit.
Keypad Lockout Select Unlocked/Partially Locked/Locked.
Clock Format Select 12 Hour or 24 Hour.
Daylight Saving Time
Select Off or On. If set to On, the system will automatically change
time/date to account for daylight saving.
Indoor Display Offsets
Select the number of degrees to offset indoor temperature or
percentage to offset indoor humidity.
*Available when thermostat is installed in Business mode.