Wi-Fi 9000 Installation Guide

7 69-2815EFS—03
System setup
System Setup Options (MENU > System Setup)
Screen Title Settings and Options
Language English/Français/Español.
Thermostat installed
in
Home/Business (Thermostat is used in a residential (default) or commercial
setting).
Your thermostat
location
Touch THERMOSTAT button to display a screen where you can enter a custom
name using a keypad. If you have only one thermostat, you can leave the
name as THERMOSTAT. For business installations you can check a box to
display the thermostat name on the home screen.
Your thermostat
controls
Select Heating or Cooling or both (default).
Your system type
Select Forced Air (default), Heat Pump, or Hot Water or Steam. Each option
offers different choices on the following screens.
Your forced air
heating system type
Select how your forced air system is powered: Gas/Oil (default) or Electric.
Efficiency of your
heating system
Select Standard Efficiency Forced Air (default) or High Efficiency Forced Air.
Your heating system
type
If you selected Hot Water or Steam on “Your system type,” select the specific
heating system here.
Number of cooling
stages
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are
connected: ‘Y’ wire only (1 stage) or ‘Y’ and ‘Y2’.
Number of heating
stages
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are
connected: ‘W’ wire only (1 stage) or ‘W’ and ‘W2’.
Your fan control Select whether your thermostat (default) or heating system controls the fan.
Type of changeover
valve
If you selected Heat Pump on “Your system type,“ select whether it uses a
cooling changeover valve (default) or heating changeover valve.
Number of heat
pump compressor
stages
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are
connected: ‘Y’ wire only (1 stage) or ‘Y’ and ‘Y2’.
Your backup heat No or Yes (default)
From the home screen, touch Menu > System Setup to modify the initial system setup.
System Setup
MENU
Next