Wi-Fi Thermostat 9000 User Guide color touchscreen
Features of your Wi-Fi thermostat With your new thermostat, you can: • Connect to the Internet to monitor and control your heating/cooling system. • View and change your heating/cooling system settings. • View and set temperature and schedules. • Receive alerts via email and get automatic upgrades. • View outdoor temperature and humidity (requires Wi-Fi set up and registration). Need Help? For assistance please visit http://yourhome.honeywell.
Welcome Congratulations on your purchase of a Honeywell Wi-Fi color touchscreen programmable thermostat. When registered to Honeywell’s Total Connect Comfort Solutions, you can remotely monitor and control the heating and cooling system in your home or business— you can stay connected to your comfort system wherever you go.
Table of contents About your new thermostat Initiating occupancy mode–business... 29 Customizing screen color.................... 30 Setting preferences............................. 31 Cleaning the thermostat screen.......... 32 Adjusting security settings................... 33 Smart Response Technology.............. 34 Pre-occupancy purge.......................... 35 Compressor protection........................ 36 Auto changeover................................. 37 Setting advanced preferences...........
Quick reference: home use HOME. Touch to display Home screen. FAN. Select fan mode. SYSTEM. Select system mode (heat/cool). MENU. Touch to display options. Start here to set a program schedule. Current schedule. Change temperature setting and select temporary or permanent hold. Indoor conditions. Shows indoor temperature and humidity. Current date and time. Current status. Shows system mode (heat/ cool). Outdoor conditions. Outdoor temperature and humidity appear after registration.
Quick reference: business use HOME. Touch to display Home screen. FAN. Select fan mode. SYSTEM. Select system mode (heat/cool). MENU. Touch to display options. Start here to set a program schedule. Thermostat location. Quickly identify which thermostat is in control of a specific area. Current schedule. Touch an arrow to change temperature setting and set a temporary hold. Override. Touch to temporarily override the program schedule. Indoor conditions. Shows indoor temperature and humidity.
Setting up your thermostat Setting up your Wi-Fi programmable touchscreen thermostat is easy. 1 Connect it to your home wireless network. 2 Register online for remote access.
Connecting to your Wi-Fi network 1 Connect the Wi-Fi network. MENU 1a Touch MENU > Wi-Fi Setup. Wi-Fi Setup -ORTouch Yes to connect the thermostat to your Wi-Fi network. The screen displays the message “Searching for wireless networks. Please wait...” after which it displays a list of all Wi-Fi networks it can find. Yes 2 Select the network. 2a Touch the name of the network you want to use. The thermostat displays a password page.
Connecting to your Wi-Fi network 2b Using the keyboard, touch the characters that spell out your home network password. 2c Touch Done. The thermostat displays “Connecting to your network. Please wait...” then shows a “Connection Successful” screen. Done 2d Touch Next to display the registration information screen. 2e Note your Thermostat MAC and Thermostat CRC. You need these numbers to complete online registration.
Connecting to your Wi-Fi network To register your thermostat, follow the instructions beginning on page 9. Note: The Register Online screen remains active until you complete registration and/or touch Done. Note: If you touch Done before you register online, your home screen displays an orange alert button telling you to register. Touching that button displays registration information and an option to snooze the task.
Registering your thermostat online To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Use the following steps. 1 Open the Total Connect Comfort web site. M31570 Go to mytotalconnectcomfort.
Registering your thermostat online 2 Login or create an account. If you have an account, click Login – or – click Create An Account 2a Follow the instructions on the screen. 2b Check your email for an activation message from My Total Connect Comfort. This may take several minutes. Note: If you do not receive a response, check your junk mailbox or use an alternate e-mail address. 2c Follow activation instructions in the email. 2d Log in.
Registering your thermostat online 3 Register your Wi-Fi thermostat. Thermostat ID Card After you are logged in to your Total Connect Comfort account, register your thermostat. Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.com Carte d’identification de thermostat HONEYWELL MODEL: RTH8580WF MAC ID: MAC CRC: Utilisez l’identification MAC et l’identification CRC pour enregistrer ce produit à mytotalconnectcomfort.com 3a Follow the instructions on the screen.
Registering your thermostat online When the thermostat is successfully registered, the Total Connect Comfort registration screen will display a SUCCESS message. You can now control your thermostat from anywhere through your laptop, tablet, or smartphone. Total Connect Comfort free app is available for Apple iPhone , iPad and iPod touch devices at iTunes or at Google Play for all Android™ devices.
Setting the time/date 1 Touch the current time. The screen displays Set Time/Set Date. Fri, Jun 14, 2013 2 Touch Set Time or Set Date. 6:30 pm 3 Touch p or q until the proper time/ date is displayed. 4 Touch Done to save or Cancel to ignore changes. Note: This thermostat will automatically update for daylight saving time (if observed in your area) and all date/time information is stored.
Setting the fan 1 Touch FAN to display fan settings. FAN 2 Touch On, Automatic, Circulate, or Follow Schedule. Done 3 Touch Done to save and exit. On: Fan is always on. Automatic: Fan runs only when the heating or cooling system is on. Circulate: Fan runs randomly about 35% of the time (home use only). Follow Schedule: Fan controlled by program (see pages 16-21). Note: Touch Auto or On to temporarily override the programmed fan schedule.
Setting system mode 1 Touch SYSTEM to display system settings. 2 Touch desired option: Heat: Thermostat controls only the heating system. Cool: Thermostat controls only the cooling system. Off: Heating/cooling systems are off. Automatic: Thermostat selects heating or cooling as needed depending on the indoor temperature. Emergency Heat (heat pumps with aux. heat): Controls auxiliary/ emergency heat. Compressor is locked out. SYSTEM Done 3 Touch Done to save and exit.
Preset energy-saving schedules This thermostat uses default Energy Saver settings that can reduce your heating/ cooling expenses. To customize settings, see next page.
Adjusting program schedules 1 Touch MENU. MENU 2 Select Create/Edit Schedule. • Touch View/Edit to view the full schedule and make a quick adjustment. Create / Edit Schedule • Touch Guide Me to create a schedule by answering simple questions. • Touch I’ll do it myself to manually create a program schedule. See page 18. Note: To reduce costs, use the pre-set Energy Saver settings described on page 16.
Adjusting program schedules If you selected I’ll do it myself on the Create/ Edit Schedule screen (page 17), follow these steps: 1 Select the days to schedule, touch Next. 2 Touch Wake to set your Wake time for selected days.
Adjusting program schedules 3 Touch p or q to set Heat and Cool temperatures for the Wake period, then touch Done. 4 Touch other time periods (Leave, Return, Sleep) to set time and temperatures for each. Done 5 Touch Done to save and exit. Note: Touch Delete Period to eliminate any unwanted time period. Note: Touch Fan Settings to customize fan settings for any time period.
Overriding schedules: home use 1 Touch p or q to adjust the temperature (right side of screen) and the Hold Until time (left side). The schedule will resume when the Hold Until time expires. Switch To Permanent Hold 2 Touch Switch to Permanent Hold to keep the same temperature until you change it or resume the program schedule. 3 Touch Cancel Hold at any time to resume the program schedule.
Overriding schedules: business use Touch p or q to adjust the temperature. It will be maintained until the hold time you set. • To change the hold time, touch the Hold Until arrow buttons. This time can be adjusted up to the maximum time set on the Override Duration screen in Advanced Preferences (page 38). • Touch Override to use a pre-set occupied temperature if a person uses the room during an unoccupied period.
Viewing equipment status 1 Touch MENU. MENU 2 Select Equipment Status. 3 Touch p or q to view the status of all the equipment your thermostat is controlling.
Setting vacation hold: home use This feature helps you save energy while you are away, and restores comfortable settings just before you return home. MENU Vaca on Mode 1 Touch MENU. 2 Select Vacation Mode. 3 Touch p or q to select the date you leave, then touch Next for further scheduling details, including times of day, temperature settings, return date, and return settings. 4 Review your selections on the last display, and touch Done to save your settings. Touch Back, then Cancel to ignore the changes.
Setting holiday/event schedules: business use This feature helps you conserve energy when the workplace is unoccupied for special events and holidays. MENU Holiday / Event Scheduler 1 Touch MENU. 2 Select Holiday/Event Scheduler. 3 Select the item you want to schedule. Custom events • Custom Events lets you set up other days for special schedules. • US and Canadian Holiday options let you select from a list of holidays commonly observed in each country. 4 Make selections as prompted on each screen.
Setting custom events: business use This feature lets you customize temperature settings to be maintained during a specific event. You can set up an event for a specific date or day in a month. The thermostat resumes normal scheduling after the event. Custom events 1 Select Custom events from the Holiday/ Event Scheduler menu. 2 Select Create a new event.
Setting custom events: business use 3 Select Specific Date or Month/Weekday. • For Specific Date, you are prompted to select the start date, settings, end date, and frequency for the event. • For Month/Weekday, you are prompted to select the month, day of the week, week of the month, settings, length of event, and frequency of the event. Next 4 Review the settings and touch Done to save them. Touch Back, then Cancel to ignore the changes.
Setting holiday schedule: business use This feature lets you customize temperature settings to be maintained on specified national holidays. The thermostat resumes normal scheduling between selected holidays. 1 Select US Holidays or Canadian Holidays from the Holiday/Event Scheduler menu. 2 Select Add/Edit Holidays. A list of national holidays is displayed. 3 Touch the check box next to each holiday for which you want to maintain specific settings, (Touch p or q to scroll through the holiday list.
Setting holiday override: business use This feature lets you customize temperature settings to be maintained from now until a specified date. The thermostat resumes normal scheduling on the date you select. MENU Holiday Mode 1 Touch MENU. 2 Select Holiday Mode to display temperatures while you are away on holiday. 3 Touch p or q to select the Heat and Cool temperatures, then touch Next to select return date. 4 Review the settings and touch Done to save them. Touch Back, then Cancel to ignore the changes.
Initiating occupancy mode: business use This feature keeps temperature at an energy-saving level until you touch Press to start occupancy. When you arrive, touch the button to maintain a comfortable temperature while the room is occupied. Touch the p or q buttons to set the temperature or the Hold Until time. The temperature is maintained until the time you set. Temperature returns to an energysaving level after the timer expires, or the “Occupied” period ends.
Customizing screen color You can customize your thermostat display to match your décor. 1 Touch Menu. MENU Color Themes 2 Touch Color Themes. 3 Select the name of a color to use a predefined background, or select Custom to define you own background color and text. • If you select a color name, the screen shows an example on the left. Touch Done to accept that selection. Done • If you touch Custom, the screen gives you instructions.
Setting preferences Preference menu options let you select how the thermostat displays information or responds to certain situations. MENU Preferences 1 Touch MENU and select Preferences. 2 Select an option and follow prompts: • Reminders • Utility Schedule Options • Backlight • Smart Response Technology • Advanced Preferences • Restore Default Schedule 3 Touch Done to save your settings. Touch Cancel to ignore changes.
Cleaning the thermostat screen When you select the Clean Screen option, the screen is locked so you don’t accidentally change settings while you clean. MENU Clean Screen 1 Touch MENU. 2 Select Clean Screen. A prompt asks if you want to clean the screen for 30 seconds. 3 Touch Yes. A countdown timer displays elapsed time until the screen is reactivated. Yes Note: Do NOT spray any liquid directly on the thermostat. Spray liquids onto a cloth, then use the damp cloth to clean the screen.
Adjusting security settings You can adjust security options to prevent unauthorized changes to system settings. MENU 1 Touch MENU and select Security Settings. Security Se ngs 2 Select Change Lock Mode. 3 Select an option and follow prompts: Unlocked: Full access allowed. Partially locked: Only temperature can be changed. Fully locked: No access allowed.
Smart Response Technology This feature (home use only) allows the thermostat to “learn” how long the heating/ cooling system takes to reach programmed temperature settings, so the temperature is reached at the time you set. For example: Set the Wake time to 6:00 am, and the temperature to 70°. The heat will come on before 6:00 am, so the temperature is 70° by 6:00 am. Note: Select Smart Response Technology in the Preferences menu (page 31).
Pre-occupancy purge This business use feature turns on the fan 1 to 3 hours before each “occupied” time period, to provide a comfortable work environment when you arrive.
Compressor protection The thermostat keeps the compressor off for a few minutes before restarting, to prevent equipment damage. During this “off” time, the message “waiting for equipment” is displayed on screen.
Auto changeover This feature is used in climates where both air conditioning and heating are used on the same day. When the system is set to Automatic, the thermostat automatically selects heating or cooling depending on the indoor temperature. Heat and cool settings must be at least 3 degrees apart. The thermostat will automatically adjust settings to maintain this 3-degree separation. Note: Select Auto Changeover on the Heating and Cooling System Changeover screen under Advanced Preferences.
Setting advanced preferences You can change options for a number of system functions. Although many options, such as language and temperature indication settings are the same for all setups, others depend on the type of system you have. MENU Preferences 1 Touch MENU. The thermostat displays a list of options. 2 Select Preferences > Advanced Preferences. The thermostat displays the first screen of options that you can change.
Setting advanced preferences Advanced Preferences Options (MENU > Preferences > Advanced Preferences) Screen Title Settings and Options Scheduling Options Select Non-programmable or Programmable. Programmable uses default or customized programming to automatically raise and lower temperature settings for different times of day. Temperature Indication Scale Select Fahrenheit or Celsius. Heating and Cooling System Changeover Select Manual or Automatic.
Setting advanced preferences Advanced Preferences Options (concluded) Screen Title Settings and Options Early Recovery for Heating * Select No to begin recovery on schedule or Yes to ramp up temperature early. Early Recovery for Cooling * Select No to begin recovery on schedule or Yes to ramp down temperature early. Temperature Limits Select the Minimum Cool and Maximum Heat Limit. Keypad Lockout Select Unlocked/Partially Locked/Locked. Clock Format Select 12 Hour or 24 Hour.
Disconnecting your Wi-Fi network If you need to disconnect the thermostat from your Wi-Fi network (for example, you’re replacing your router), follow these steps: MENU Wi-Fi Setup 1 Touch MENU. 2 Select Wi-Fi Setup. 3 Touch Disconnect from Network. The thermostat will display a question to confirm your selection. 4 Touch Yes to confirm that you want to disconnect from the network. The thermostat will display the Wi-Fi Setup screen. Disconnect from Network 5 Touch OK to display the menu.
Reconnecting your Wi-Fi network 1 Touch MENU. MENU 2 Select Wi-Fi Setup. 3 Touch the name of the network you want to use. The thermostat may display a password page. 4 To enter a password, touch characters to spell out your home network password, then touch Done. 5 The thermostat displays “Connecting to your network. Please wait...” then a “Connection Successful” screen. 6 Touch Next. • If your thermostat is registered, you will see your signal strength and other status information. Touch Done.
Unregistering your thermostat If you remove the thermostat from your Total Connect Comfort website account (for example, you’re moving and leaving the thermostat behind), follow these steps: 1 On mytotalconnectcomfort.com log into your account. 2 Under My Account, select Edit My Profile. 3 Click the Delete My Account button. Your thermostat will display an orange button that says Register Online.
Changing system setup If the thermostat is reset to factory default settings, you need to change the thermostat settings to match your heating/cooling system. Your contractor did this when the thermostat was installed. Follow these steps to setup the thermostat, or call your contractor to do it. MENU System Setup 1 Touch MENU. The thermostat displays a list of options. 2 Select System Setup. The thermostat displays the first screen of options that you can change.
Changing system setup Note: Touch the orange Help button on any screen for more information. System Setup Options (MENU > System Setup) Screen Title Settings and Options Language English/Français/Español. Thermostat installed in Home/Business (Thermostat is used in a residential (default) or commercial setting). Your thermostat location Touch THERMOSTAT button to display a screen where you can enter a custom name using a keypad. If you have only one thermostat, you can leave the name as THERMOSTAT.
Changing system setup System Setup Options (concluded) Screen Title Settings and Options Number of cooling stages Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are connected: ‘Y’ wire only (1 stage) or ‘Y’ and ‘Y2.’ Number of heating stages Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are connected: ‘W’ wire only (1 stage) or ‘W’ and ‘W2.’ Your fan control Select whether your thermostat (default) or heating system controls the fan.
System setup Note: Your contractor already setup your thermostat. You should not need to perform any setup. Follow these instructions only if you do a factory reset. Before connecting to your Wi-Fi network, you need to set initial thermostat options to define your heating/cooling system: Next • Language • Home or business You can customize other options later. Follow prompts on the screen to select appropriate options. 1 Touch the language you want the thermostat to display, then touch Next.
System setup 3 Touch Next, or name the thermostat location—touch THERMOSTAT and follow the rest of the instructions. 4 Select what your thermostat will control and touch Next. Note: Touch the orange Help button on any screen for more information.
System setup 5 Select your system type and touch Next. The system type determines other selections for completing initial setup. Use the checklist from Step 6d when making selections. 6 Touch Next after making selections on each screen. Next 7 Touch Done on the last screen. The thermostat displays an option to connect to your Wi-Fi network. Note: Touch the orange Help button on any screen for more information.
Frequently asked questions QQ: Will my thermostat still work if I lose my Wi-Fi connection? AA: Yes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi. QQ: How do I find the password to my router? AA: Contact the manufacturer of the router or check the router documentation. QQ: Why am I not seeing my Wi-Fi setup page? AA: You are probably connected only to your router, not to your thermostat. Try connecting to the thermostat again.
Frequently asked questions router has a good internet connection. On your computer, verify that you can open the site at mytotalconnectcomfort.com If you cannot open the site, switch off the internet modem for a few seconds, then power it back on. QQ: I registered on the Total Connect Comfort website but was unable to login using my new account. AA: Check your email and ensure that you received an activation email. Follow the instructions to activate your account and then login to the website.
Getting help and responding to alerts Your thermostat offers two types of assistance, if these assistance options do not answer your questions, review the FAQs (pages 50-51) and troubleshooting tips (page 55). Help On screen help Most displays include an orange Help button. 1 Touch Help to display instructions for using the screen. 2 Touch OK to redisplay the original screen.
Getting help and responding to alerts On screen alerts Your home screen will display a large orange button when you need to correct a setting or system problem. Replace Air Filter 1 Touch the button, the thermostat displays instructions for completing the task to which you were alerted. Press for info 2 Touch OK on the instruction display, then carry out the task. When the task is complete, the alert button will no longer be displayed.
Software updates Honeywell periodically issues updates to the software for this thermostat. The updates occur automatically through your Wi-Fi connection. All your settings are saved, so you will not need to make any changes after the update occurs. Updates occur in the early morning. After your thermostat receives the software, it reboots, briefly displaying the Honeywell logo. The screen then shows “Updating software…” with a green progress bar.
Troubleshooting If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • Check circuit breaker and reset if necessary. • Make sure power switch at heating and cooling system is on. • Make sure furnace door is closed securely. “Wait” appears on the screen • Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor.
Glossary Heat Pump heating/cooling system Heat pumps are used to heat and cool a home. If your old thermostat has a setting for auxiliary or emergency heat, you likely have a heat pump. Conventional heating/cooling system Non–heat pump type systems; these include air handlers, furnaces or boilers that run on natural gas, oil or electricity. They may or may not include an air conditioner. MAC ID, MAC CRC Alphanumeric codes that uniquely identify your thermostat.
Regulatory information FCC Compliance Statement (Part 15.19) (USA only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. FCC Warning (Part 15.
5-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of five (5) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
69-2814EFS-03 Automation and Control Systems Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Ltd 705 Montrichard Avenue Saint-Jean-sur-Richelieu, Québec J2X 5K8 yourhome.honeywell.com ® U.S. Registered Trademark. Apple, iPhone, iPad, iPod touch and iTunes are trademarks of Apple Inc. All other trademarks are the property of their respective owners. © 2013 Honeywell International Inc. 69-2814EFS—03 MS Rev. 12-13 Printed in U.S.A.
Thermostat Wi-Fi 9000 à écran tactile couleur Guide de l’utilisateur
Caractéristiques de votre thermostat Wi-Fi Avec votre nouveau thermostat, vous pouvez : • Vous connecter à Internet pour surveiller et contrôler votre système de chauffage/ refroidissement. • Consulter et modifier les réglages de votre système de chauffage/refroidissement. • Consulter et régler la température et les programmes. • Recevoir des alertes par courrier électronique et obtenir des mises à jour automatiques.
Bienvenue Nous vous félicitons de votre achat d’un thermostat programmable à écran tactile couleur Wi-Fi Honeywell. Après vous être enregistré auprès du service Total Connect Comfort d’Honeywell, vous pouvez surveiller et contrôler à distance le système de chauffage et de refroidissement de votre domicile ou de votre entreprise — vous pouvez rester connecté à votre service confort où que vous soyez.
Table des matières À propos du nouveau thermostat Réglage du programme des jours fériés : commerciale............................... 27 Lancement du mode Occupé : commerciale.................................................... 29 Personnalisation de la couleur de l’écran....... 30 Préférences de réglage................................... 31 Nettoyage de l’écran du thermostat................ 32 Réglages de sécurité...................................... 33 Technologie Smart Response.........................
Référence rapide : utilisation résidentielle ACCUEIL. Touchez pour afficher l’écran Accueil. VENTILATEUR. Sélectionnez le mode du ventilateur. SYSTÈME. Sélectionnez le mode du système (chauffage/refroidissement). MENU. Touchez pour afficher les options. Commencez ici pour configurer un programme. Programme en cours. Modifiez le réglage de la température et sélectionnez le maintien provisoire ou permanent. Conditions intérieures. Affiche la température et l’humidité intérieures. Heure et date actuelles.
Référence rapide : utilisation commerciale ACCUEIL. Touchez pour afficher l’écran Accueil. VENTILATEUR. Sélectionnez le mode du ventilateur. SYSTÈME. Sélectionnez le mode du système (chauffage/refroidissement). MENU. Touchez pour afficher les options. Commencez ici pour configurer un programme. Emplacement du thermostat. Identifie rapidement le thermostat contrôlant une zone spécifique. Programme en cours. Touchez une flèche pour modifier le réglage de température et régler le maintien provisoire.
Configuration de votre thermostat La configuration de votre thermostat programmable à écran tactile couleur Wi-Fi est facile. 1 Connectez-le au réseau sans fil de votre domicile. 2 Enregistrez-vous en ligne pour bénéficier de l’accès à distance.
Connexion à votre réseau Wi-Fi 1 Connectez le réseau Wi-Fi. MENU 1a Touchez MENU > Configuration Wi-Fi. Configuration Wi-Fi -OUTouchez Oui pour connecter le thermostat à votre réseau Wi-Fi. L’écran affiche le message « Recherche de réseaux sans fil. Veuillez patienter... » après lequel une liste de tous les réseaux Wi-Fi détectés s’affiche. Oui 2 Sélectionnez le réseau. 2a Touchez le nom du réseau que vous souhaitez utiliser. Le thermostat affiche la page du mot de passe.
Connexion à votre réseau Wi-Fi 2b En utilisant le clavier, touchez les caractères pour saisir le mot de passe de votre réseau résidentiel. Inscrivez le mot de passe de votre réseau Wi-Fi 2c Touchez Terminé. Le thermostat affiche “Connexion au réseau en cours. Veuillez patienter...” puis affiche l’écran “Connexion réussie”. Terminé 2d Touchez Suivant pour afficher l’écran des informations d’enregistrement. 2e Notez les identifiants MAC et CRC du thermostat.
Connexion à votre réseau Wi-Fi Pour enregistrer votre thermostat, suivez les instructions commençant à la page 30. Remarque : L’écran Enregistrement en ligne reste actif jusqu’à ce que l’enregistrement soit terminé et/ou que vous touchiez Terminé. Terminé Remarque : Si vous touchez Terminé avant de vous enregistrer en ligne, votre écran d’accueil affiche un bouton d’alerte orange vous indiquant de procéder à l’enregistrement.
Enregistrement de votre thermostat en ligne Pour visualiser et régler votre thermostat Wi-Fi à distance, vous devez posséder un compte Total Connect Comfort. Voici comment procéder. 1 Ouvrez le site web Total Connect Comfort. M31570 Allez à mytotalconnectcomfort.
Enregistrement de votre thermostat en ligne 2 Ouvrez une session ou créez un compte. Si vous possédez un compte, cliquez sur Login (Ouvrir une session) une session – ou – cliquez sur Create An Account (Créer un compte) 2a Suivez les instructions à l’écran. 2b Consultez votre messagerie et recherchez le message d’activation provenant de My Total Connect Comfort. Ceci peut prendre plusieurs minutes.
Enregistrement de votre thermostat en ligne 3 Enregistrez votre thermostat Wi-F. Thermostat ID Card Lorsque vous avec accès à votre compte Total Connect Comfort, enregistrez votre thermostat. Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.com Carte d’identification de thermostat HONEYWELL MODEL: RTH8580WF MAC ID: MAC CRC: Utilisez l’identification MAC et l’identification CRC pour enregistrer ce produit à mytotalconnectcomfort.com 3a Suivez les instructions à l’écran.
Enregistrement de votre thermostat en ligne Lorsque le thermostat est convenablement enregistré, l’écran d’enregistrement Total Connect Comfort affiche un message de réussite. Vous pouvez maintenant contrôler votre thermostat de n’importe quel endroit au moyen de votre ordinateur portatif, de votre tablette ou de votre téléphone intelligent.
Réglage de l’heure/la date 1 Touchez l’heure courante. L’écran affiche Régler l’heure/Régler la date. ven, 14 juin, 2013 2 Touchez Régler l’heure ou Régler la date. 6:30 pm 3 Touchez p ou q jusqu’à ce que l’heure/la date adéquates s’affichent. 4 Touchez Terminé pour enregistrer ou Annuler pour ignorer les changements. Remarque : Ce thermostat se mettra à jour automatiquement à l’heure d’été/ d’hiver (si respecté dans votre zone) et l’information de la date/heure est enregistrée.
Réglage du ventilateur 1 Touchez VENTILATEUR pour afficher les réglages du ventilateur. VENTILATEUR 2 Touchez Marche, Automatique, Circulation ou Suivre le programme. 3 Touchez Terminé pour enregistrer et quitter. Marche : le ventilateur est toujours activé. Automatique : le ventilateur fonctionne uniquement lorsque le système de chauffage ou de refroidissement est en marche. Circulation : le ventilateur fonctionne de façon aléatoire, environ 35 % du temps (utilisation résidentielle uniquement).
Réglage du mode du système 1 Touchez SYSTÈME pour afficher les réglages du système. 2 Touchez l’option désirée : SYSTÉME Terminé Chauffage : Le thermostat commande uniquement le système de chauffage. Refroidissement : Le thermostat commande uniquement le système de refroidissement. Arrêt : Les systèmes de chauffage et de refroidissement sont arrêtés. Automatique : Le thermostat sélectionne le chauffage ou le refroidissement selon le besoin en fonction de la température ambiante.
Programmes d’économie d’énergie préconfigurés Ce thermostat utilise les réglages de l’économiseur d’énergie par défaut pour obtenir une réduction des coûts de chauffage/refroidissement. Pour personnaliser les réglages, consultez la page suivante.
Réglage des horaires de programmation 1 Touchez MENU. MENU 2 Sélectionnez Créer/Modifier l’horaire. • Touchez Afficher/Modifier pour voir le programme complet et faire un réglage rapide. Créer / Modif ier I horaire • Touchez Aidez-moi pour créer un programme en répondant à de simples questions. • Touchez Je le ferai moi-même pour créer un programme manuellement. Consultez la page 39. Remarque : Pour réduire les coûts, utilisez les réglages préconfigurés de l’économiseur d’énergie décrits à la page 37.
Réglage des horaires de programmation Si vous sélectionnez Je le ferai moi-même sur l’écran Créer/Modifier programme (page 38), suivez ces étapes : 1 Sélectionnez les jours à programmer puis Suivant. 2 Touchez Réveil pour régler l’heure de réveil pour les jours sélectionnés.
Réglage des horaires de programmation 3 Touchez p ou q pour régler les températures de chauffage et de refroidissement pour la période de réveil, puis touchez Terminé. 4 Touchez les autres périodes de temps (Départ, Retour, Sommeil) pour régler l’heure et les températures de chaque période. Terminé 5 Touchez Terminé pour enregistrer et quitter. Remarque : Touchez Supprimer période pour éliminer toute période de temps non souhaitée.
Dérogation aux programmes : utilisation résidentielle 1 Touchez p ou q pour régler la température (côté droit de l’écran) et la durée Maintien jusqu’à (côté gauche). Le programme reprend lorsque la durée Maintien jusqu’à a expiré. Passez à Main en Permanent 2 Sélectionnez Passez à maintien permanent pour maintenir la même température jusqu’à la prochaine modification ou jusqu’à la reprise du programme configuré. 3 Touchez Annuler maintien à tout moment pour réactiver le programme configuré.
Dérogation aux programmes : utilisation commerciale Touchez p ou q pour ajuster la température. Celle-ci restera en vigueur jusqu’à la durée de maintien réglée. • Pour modifier la durée de maintien, touchez les boutons fléchés Maintien jusqu’à. Cette heure peut être ajustée jusqu’à la durée maximum réglée sur l’écran Durée de la dérogation dans les Préférences avancées (page 38).
Affichage du statut de l’équipement 1 Touchez MENU. MENU 2 Sélectionnez État du matriel. 3 Touchez p ou q pour afficher le statut de tout l’équipement contrôlé par le thermostat.
Réglage du maintien pendant les vacances : utilisation résidentielle Cette caractéristique vous permet d’économiser de l’énergie en votre absence et restaure une température confortable juste avant votre retour. MENU Mode Vacances 1 Touchez MENU. 2 Sélectionnez Mode vacances. 3 Touchez p ou q pour sélectionner la date de départ, puis touchez Suivant pour afficher plus de détails de programmation, y compris les heures du jour, les réglages de température, la date de retour et les réglages de retour.
Réglage des programmes vacances/jours fériés : utilisation commerciale Cette fonction permet de conserver de l’énergie lorsque personne ne se trouve sur le lieu de travail durant les jours fériés et les événements spéciaux. 1 Touchez MENU. MENU Ges onnaire des jours fériés / événements 2 Sélectionnez Gestionnaire des jours fériés/ événements. Événements personnalisés 3 Sélectionnez l’article à programmer. • Événements personnalisés vous permet de configurer d’autres jours pour les programmes spéciaux.
Réglage des événements personnalisés : utilisation commerciale Cette fonction vous permet de personnaliser les réglages de température à maintenir durant un événement spécifique. Vous pouvez configurer un événement pour une date ou un jour spécifique du mois. Le thermostat reprend le programme normal après l’événement. Événements personnalisés 1 Sélectionnez Événements personnalisés dans le menu Gestionnaire des jours fériés/événements. Créer un nouvel événement 2 Sélectionnez Créer un nouvel événement.
Réglage des événements personnalisés : utilisation commerciale 3 Sélectionnez Date spécifique ou Mois/ Jour de la semaine. • Pour Date spécifique, vous êtes invité à sélectionner la date de début, les réglages, la date de fin et la fréquence de l’événement. Suivant • Pour Mois/Jour de la semaine, vous êtes invité à sélectionner le mois, le jour de la semaine, la semaine du mois, les réglages, la durée de l’événement et la fréquence de l’événement.
Réglage du programme des jours fériés : utilisation commerciale Cette fonction vous permet de personnaliser les réglages de température à maintenir durant un jour férié national spécifique. Le thermostat reprend le programme normal entre les jours fériés sélectionnés. 1 Sélectionnez Jours fériés américains ou Jours fériés canadiens dans le menu Gestionnaire des jours fériés/événements. 2 Sélectionnez Ajouter/Modifier jours fériés. Une liste des jours fériés nationaux s’affiche.
Réglage du programme des jours fériés : utilisation commerciale Cette fonction vous permet de personnaliser les réglages de température à maintenir à partir de maintenant jusqu’à une date spécifiée. Le thermostat reprend le programme normal à la date sélectionnée. 1 Touchez MENU. 2 Sélectionnez Mode Jours fériés pour afficher les températures lors de votre absence durant les jours fériés.
Lancement du mode Occupé : utilisation commerciale Cette fonction maintient la température à un niveau économique jusqu’à ce que vous touchiez Appuyer pour commencer la période occupée. À l’arrivée, touchez le bouton pour maintenir une température confortable pendant que la pièce est occupée. Appuyer pour lancer I occupa on Touchez les boutons p ou q pour régler la température ou la durée de maintien. La température est maintenue jusqu’à l’heure réglée.
Personnalisation de la couleur de l’écran Vous pouvez personnaliser l’affichage de votre thermostat pour l’assortir à votre décor. 1 Touchez Menu. MENU Thémes de couleurs 2 Touchez Thèmes de couleurs. 3 Sélectionnez le nom d’une couleur à utiliser comme arrière-plan prédéfini, ou sélectionnez Personnaliser pour définir votre propre couleur d’arrière-plan et de police. • En choisissant un nom de couleur, l’écran affiche un échantillon sur la gauche. Touchez Terminé pour accepter celle sélection.
Réglages des préférences Les options du menu Préférences vous permettent de sélectionner la façon dont le thermostat affiche les informations ou répond à certaines situations. MENU Préférences 1 Touchez MENU et sélectionnez Préférences. 2 Sélectionnez une option et suivez les invites : • Rappels • Options du calendrier utilitaire • Rétroéclairage • Technologie Smart Response • Préférences avancées • Restaurer le programme par défaut 3 Touchez Terminé pour enregistrer vos réglages.
Nettoyage de l’écran du thermostat Lorsque vous sélectionnez l’option de nettoyage de l’écran, l’écran se verrouille pour que les réglages ne soient pas modifiés accidentellement durant le nettoyage. MENU Ne oyer I écran 1 Touchez MENU. 2 Sélectionnez Nettoyer l’écran. Une invite vous demande si vous souhaitez nettoyer l’écran pendant 30 secondes. Oui 3 Touchez Oui. Une minuterie montre le temps écoulé jusqu’à ce que l’écran soit réactivé.
Réglages de sécurité Vous pouvez régler les options de sécurité pour éviter les modifications non autorisées des réglages du système. MENU Réglage de sécurité 1 Touchez MENU et sélectionnez Réglages de sécurité. 2 Sélectionnez Modifier mode de verrouillage. Modifier mode de verrouillage 3 Sélectionnez une option et suivez les invites : Déverrouillé : accès intégral permis. Partiellement verrouillé : seule la température peut être modifiée. Complètement verrouillé : Aucun accès permis.
Technologie Smart Response Cette fonction permet au thermostat (résidentiel uniquement) “d’apprendre” combien de temps il faut à votre système de chauffage/refroidissement pour atteindre le réglage de température programmé, afin que la température voulue soit atteinte à l’heure programmée. Par exemple : réglez l’heure de réveil à 6 heures et la température à 70°. Le chauffage est mis en fonction avant 6 heures de manière à ce que la température soit de 70° à 6 heures.
Balayage avant occupation Cette fonction pour utilisation commerciale active le ventilateur de 1 heure à 3 heures avant chaque période occupée pour fournir un environnement de travail confortable à l’arrivée.
Protection du compresseur Le thermostat maintient le compresseur arrêté pendant quelques minutes avant un redémarrage, pour éviter d’endommager l’équipement. Pendant cette durée d’arrêt, le message “En attente du matériel” s’affiche à l’écran.
Commutation automatique Cette fonction est utilisée dans les climats où le conditionnement d’air et le chauffage sont utilisés le même jour. Lorsque le système est réglé sur Automatique, le thermostat sélectionne automatiquement le chauffage ou le refroidissement en fonction de la température intérieure. L’écart entre les réglages de chauffage et de refroidissement doit être d’au moins 3 degrés. Le thermostat ajuste automatiquement les réglages afin de maintenir ces 3 degrés d’écart.
Réglage des préférences avancées Vous pouvez modifier des options pour plusieurs fonctions du système. Bien que de nombreuses options, telles que la langue et les réglages d’indication de température, soient les mêmes pour toutes les configurations, d’autres dépendent du type de système utilisé. 1 Touchez MENU. Le thermostat affiche une liste d’options. 2 Sélectionnez Préférences > Préférences avancées. Le thermostat affiche le premier écran d’options que vous pouvez modifier.
Réglage des préférences avancées Options des préférences avancées (MENU > Préférences > Préférences avancées) Titre de l’écran Réglages et options Options de programmation Sélectionnez Non programmable ou Programmable. L’option Programmable utilise la programmation par défaut ou une programmation personnalisée pour augmenter ou réduire automatiquement les réglages de températures pour différentes périodes de la journée. Échelle d’indication de température Sélectionnez Fahrenheit ou Celsius.
Réglage des préférences avancées Options de préférences avancées (fin) Titre de l’écran Réglages et options Durée de la dérogation * Sélectionnez la durée de maintien de la température durant une dérogation : 1-10 heures ou pas de limite. Récupération précoce pour le chauffage * Sélectionnez Non pour lancer la récupération à l’heure programmée ou Oui pour lancer une rampe de température ascendante précoce.
Déconnexion du réseau Wi-Fi Si vous devez débrancher le thermostat de votre réseau Wi-Fi (par exemple pour remplacer le routeur), suivez ces étapes : MENU Configuration Wi-Fi 1 Touchez MENU. 2 Sélectionnez Configuration Wi-Fi. 3 Touchez Déconnecter du réseau. Ce thermostat affiche une question pour confirmer votre sélection. Votre réseau Inconnu 4 Touchez Oui pour confirmer que vous souhaitez vous déconnecter du réseau. Le thermostat affiche l’écran de configuration Wi-Fi.
Reconnexion au réseau Wi-Fi 1 Touchez MENU. MENU 2 Sélectionnez Configuration Wi-Fi. Configuration Wi-Fi 3 Touchez le nom du réseau que vous souhaitez utiliser. Le thermostat peut afficher la page du mot de passe. 4 Pour inscrire un mot de passe, touchez les caractères pour écrire le mot de passe de votre réseau résidentiel, puis touchez sur Terminé. Publique Votre réseau Voisin 5 Le thermostat affiche « Connexion au réseau en cours. Veuillez patienter... » puis affiche l’écran « Connexion réussie ».
Déconnexion de votre thermostat Si vous annulez l’enregistrement de votre thermostat sur le site Web Total Connect Comfort (par exemple vous déménagez sans emporter le thermostat), suivez ces étapes : 1 Sur mytotalconnectcomfort.com, ouvrez votre compte. 2 Dans Mon Compte, sélectionnez Modifier mon profil. 3 Cliquez sur le bouton Delete My Account (Supprimer mon compte). Votre thermostat affiche un bouton orange indiquant Enregistrez-vous en ligne.
Modification de la configuration du système Si le thermostat est réinitialisé aux paramètres d’usine par défaut, modifiez les réglages du thermostat en fonction de votre système de chauffage/refroidissement. Votre entrepreneur a procédé à ceci lorsque le thermostat a été installé. Suivez ces étapes pour configurer le thermostat, ou appelez votre entrepreneur pour qu’il le fasse lui-même. MENU Conf iguration du système 1 Touchez MENU. Le thermostat affiche une liste d’options.
Modification de la configuration du système Remarque : Touchez le bouton Aide orange sur n’importe quel écran pour obtenir plus d’informations. Options de configuration du système (MENU > Configuration du système) Titre de l’écran Réglages et options Langue English/Français/Español.
Modification de la configuration du système Options de configuration du système (fin) Titre de l’écran Nombre d’étages de refroidissement Nombre d’étages de chauffage Votre régulateur de ventilateur Type de vanne de commutation Nombre d’étages du compresseur de la thermopompe Votre chauffage de secours 69-2814EFS—03 Réglages et options Sélectionnez 1 étage (défaut) ou 2 étages. Si vous n’êtes pas sûr, notez les fils que vous avez connectés. Fil Y uniquement (1 étage) ou Y et Y2.
Configuration du système Remarque : Votre entrepreneur a déjà configuré votre thermostat. Aucun réglage n’est requis. Suivez ces instructions uniquement si vous avez réalisé une réinitialisation aux paramètres d’usine. Avant d’effectuer la connexion à votre réseau Wi-Fi, vous devez régler les options initiales du thermostat pour définir le système de chauffage/ refroidissement : Suivant • Langue • Résidence ou Commerce Vous pouvez personnaliser d’autres options plus tard.
Configuration du système 3 Touchez Suivant ou renommez le thermostat en touchant THERMOSTAT et en suivant le reste des instructions. 4 Sélectionnez votre type de système et touchez Suivant. Remarque : Touchez le bouton Aide orange sur n’importe quel écran pour obtenir plus d’informations.
Configuration du système 5 Sélectionnez votre type de système et touchez Suivant. Le type de système détermine d’autres sélections pour terminer la configuration initiale. Utilisez la liste de vérification de l’étape 6d pour faire les sélections. Suivant 6 Touchez Suivant après avoir effectué les sélections sur chaque écran. 7 Touchez Terminé sur le dernier écran. Le thermostat affiche l’option de connexion à votre réseau Wi-Fi.
Foire aux questions QQ: Mon thermostat fonctionnera-t-il toujours si je perds ma connexion Wi-Fi? RR: Oui, le thermostat actionnera votre système de chauffage et/ou de refroidissement avec ou sans Wi-Fi. QQ: Comment puis-je trouver le mot de passe de mon routeur? RR: Contactez le fabriquant du routeur ou vérifiez la documentation du routeur. QQ: Pourquoi ne vois-je pas ma page de configuration Wi-Fi? RR: Vous êtes probablement uniquement connecté à votre routeur, et non pas à votre thermostat.
Foire aux questions votre ordinateur, vérifiez que vous pouvez ouvrir le site sur mytotalconnectcomfort. com. Si ce n’est pas le cas, éteignez le modem pendant quelques secondes, puis rallumez-le. QQ: Je suis enregistré sur le site Total Connect Comfort mais je n’ai pas pu ouvrir de session en utilisant mon nouveau compte. RR: Consultez votre messagerie et vérifiez que vous avez reçu le message d’activation. Suivez les instructions d’activation de votre compte, puis ouvrez une session sur le site web.
Obtenir de l’aide et répondre aux alertes Votre thermostat offre deux types d’assistance. Si ces options d’assistance ne répondent pas à vos questions, consultez la foire aux questions (pages 50-51) et les conseils de dépannage (page 55). Aide Aide sur écran La plupart des écrans comprennent un bouton Aide orange. 1 Touchez Aide pour afficher les instructions d’utilisation de l’écran. 2 Touchez OK pour afficher de nouveau l’écran d’origine.
Obtenir de l’aide et répondre aux alertes Alertes à l’écran Votre écran d’accueil affichera un gros bouton orange lorsque vous devrez corriger un réglage ou un problème avec le système. Remplacez le filtre á air 1 Touchez le bouton, le thermostat affichera les instructions nécessaires pour compléter la tâche pour laquelle vous avez été alerté. Appuyez pour info 2 Touchez OK sur l’écran d’instructions, puis effectuez la tâche. Lorsque la tâche est complétée, le bouton d’alerte disparaîtra.
Mises à jour logicielles Honeywell publie régulièrement des mises à jour pour le logiciel de ce thermostat. Ces mises à jour se font automatiquement par l’intermédiaire de votre connexion Wi-Fi. Tous vos réglages sont enregistrés, de sorte que vous n’avez à effectuer aucune modification après la mise à jour. Les mises à jour ont lieu tôt le matin. Une fois votre thermostat mis à jour, il est relancé et affiche brièvement le logo Honeywell. L’écran affiche “Mise à jour logicielle...
Dépannage En cas de difficultés avec le thermostat, essayez les suggestions suivantes. La plupart des problèmes peuvent être réglés rapidement et facilement. Rien n’apparaît à l’écran • Vérifiez le disjoncteur et réinitialisez-le si nécessaire. • Assurez-vous que l’interrupteur de marche-arrêt du système de chauffage et de refroidissement est sur marche. • Assurez-vous que la porte de l’appareil de chauffage est bien fermée.
Glossaire Système de chauffage/refroidissement à thermopompe Des thermopompes sont utilisées pour chauffer et refroidir une résidence. Si votre ancien thermostat comporte un réglage pour chauffage auxiliaire ou d’urgence, vous avez probablement une thermopompe. Système de chauffage/refroidissement conventionnel Systèmes sans thermopompe; ceux-ci incluent des appareils de traitement d’air, des chaudières ou des chauffe-eau qui fonctionnent au gaz naturel, au mazout ou à l’électricité.
Informations réglementaires Déclaration de conformité à la FCC (Partie 15.19) (ÉtatsUnis uniquement) Cet appareil est conforme à la partie 15 du règlement de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : 1 Ce dispositif ne doit pas causer d’interférences nuisibles, et 2 Ce dispositif doit accepter toutes les interférences reçues, y compris celles pouvant causer un fonctionnement non souhaité. Avertissement de la FCC (Partie 15.
Garantie limitée de 5 ans Honeywell garantit ce produit, à l’exception des piles, contre tout défaut de pièce ou de main-d’oeuvre, durant une période de cinq (5) ans à partir de la date d’achat si le produit est utilisé et entretenu convenablement. Si, à n’importe quel moment de la période de garantie, le produit est défectueux, Honeywell le réparera ou le remplacera (à sa discrétion).
69-2814EFS-03 Systèmes d’automatisation et de régulation Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Ltd 705 Montrichard Avenue Saint-Jean-sur-Richelieu, Québec J2X 5K8 yourhome.honeywell.com ® Marque de commerce déposée américaine. Apple, iPhone, iPad, iPod touch et iTunes sont des marques de commerce de Apple Inc. Toutes les autres marques de commerce sont propriété de leurs propriétaires respectifs. © 2013 Honeywell International Inc. 69-2814EFS—03 MS Rev.
Termostato con conexión WiFi 9000 pantalla táctil a color Guía del usuario
Características del termostato con conexión WiFi Con el nuevo termostato, podrá realizar lo siguiente: • Conectarse a Internet para supervisar y controlar el sistema de calefacción/ refrigeración. • Ver y modificar las configuraciones del sistema de calefacción/refrigeración. • Ver y configurar la temperatura y los cronogramas. • Recibir alertas por correo electrónico y obtener actualizaciones automáticas. • Ver la temperatura y humedad exterior (requiere configuración WiFi y estar registrado).
Bienvenido Felicitaciones por la compra del termostato con pantalla táctil a color, programable con conexión WiFi de Honeywell. Cuando se registre en Total Connect Comfort Solutions de Honeywell, puede supervisar y controlar de manera remota el sistema de calefacción y refrigeración de su hogar o empresa; puede permanecer conectado a su sistema de confort dondequiera que vaya.
Índice Acerca de su nuevo termostato Configuración de la anulación de días festivos: uso empresarial................ 28 Inicio de la modalidad de ocupación: empresarial.................................................. 29 Cómo personalizar el color de la pantalla... 30 Configuración de las preferencias............... 31 Limpieza de la pantalla del termostato........ 32 Ajuste de las configuraciones de seguridad................................................ 33 Tecnología Smart Response....................
Referencia rápida: uso doméstico HOGAR. Presione para visualizar la pantalla de inicio. VENTILADOR. Seleccione una modalidad para el ventilador. SISTEMA. Seleccione la modalidad del sistema (calefacción/refrigeración). MENÚ. Presione para visualizar las opciones. Comience aquí para configurar un cronograma del programa. Cronograma actual. Cambie la configuración de la temperatura y seleccione el mantenimiento temporal o permanente. Condiciones interiores. Muestra la temperatura y la humedad interior.
Referencia rápida: uso empresarial HOGAR. Presione para visualizar la pantalla de inicio. VENTILADOR. Seleccione una modalidad para el ventilador. SISTEMA. Seleccione la modalidad del sistema (calefacción/refrigeración). MENÚ. Presione para visualizar las opciones. Comience aquí para configurar un cronograma del programa. Ubicación del termostato. Identifique rápidamente qué termostato controla un sector determinado. Cronograma actual.
Configuración del termostato Configurar el termostato con pantalla táctil, programable con conexión WiFi es fácil. 1 Conéctelo a su red inalámbrica doméstica. 2 Regístrelo a través de Internet para obtener acceso remoto.
Conexión de la red WiFi 1 Conecte la red WiFi. MENÚ 1a Toque MENÚ > Configuración WiFi. Configuración Wi-Fi -OToque Sí para conectar el termostato a su red WiFi. En la pantalla, se visualiza el mensaje “Búsqueda de redes inalámbricas. Espere…”; luego, se muestra una lista de todas las redes WiFi que se han encontrado.. ¿Desea conectar este termostato a una red de WiFi ahora? Sí 2 Seleccione la red. 2a Toque el nombre de la red que desea utilizar. El termostato muestra una página de contraseña.
Conexión de la red WiFi 2b Use el teclado para introducir la contraseña de su red doméstica. Ingrese la contraseña de la red WiFi para su red 2c Toque Terminado. El termostato muestra el mensaje “Conectándose a su red. Espere...” y, luego, aparece la pantalla “Conexión satisfactoria.” Terminado 2d Toque Siguiente para visualizar la pantalla de información de registro. 2e Ingrese los números de identificación MAC y CRC de su termostato.
Conexión de la red WiFi Para registrar su termostato, siga las instrucciones disponibles a partir de la página 30. Nota: La pantalla Registro a través de Internet permanece activa hasta que haya completado el registro o hasta que toque Terminado. Terminado Nota: Si toca Terminado antes de registrarlo a través de Internet, la pantalla de inicio muestra un botón anaranjado de alerta que le informa que debe registrar su termostato.
Registro del termostato en línea Para ver y configurar el termostato con conexión WiFi de manera remota, debe tener una cuenta en Total Connect Comfort. Siga los siguientes pasos. 1 Abra el sitio web Total Connect Comfort. M31570 Vaya a mytotalconnectcomfort.
Registro del termostato en línea 2 Inicie sesión o cree una cuenta. Si tiene una cuenta, haga clic en Login (Inicio de sesión), o bien, haga clic en Create An Account (Crear una cuenta). 2a Siga las instrucciones en la pantalla. 2b Revise su correo electrónico para verificar si tiene un mensaje de activación de My Total Connect Comfort. Esto puede demorar varios minutos. Nota: Si no recibió un mensaje de activación, revise su correo no deseado o use otra dirección de correo electrónico.
Registro del termostato en línea 3 Registre su termostato con conexión WiFi. Thermostat ID Card Use the MAC ID and CRC ID to register this product at mytotalconnectcomfort.com Después de que haya iniciado sesión en su cuenta Total Connect Comfort, registre el termostato. 3a Siga las instrucciones en la pantalla.
Registro del termostato en línea Cuando el termostato se haya registrado correctamente, la pantalla de registro de Total Connect Comfort le mostrará el mensaje REGISTRO EXITOSO. Ahora, puede controlar su termostato desde cualquier lugar a través de su computadora portátil, computadora tipo tableta o teléfono inteligente.
Configuración de la hora y la fecha 1 Toque la hora actual. La pantalla muestra Configurar hora/Configurar fecha. Vie, Jun 14, 2013 2 Toque Configurar hora o Configurar fecha. 6:30 pm 3 Toque s o t hasta que aparezcan la hora y la fecha correctas. 4 Toque Terminado para guardar o Cancelar para ignorar los cambios. Nota: Este termostato se actualizará automáticamente para el horario de verano (si se observa en su área) y almacena toda la información de fecha/ hora.
Configuración del ventilador 1 Toque la opción VENTILADOR para mostrar las configuraciones del ventilador. 2 Toque Encendido, Automático, Circulación o Seguir el cronograma. 3 Toque Terminado para guardar y salir. Encendido: El ventilador está siempre encendido. Automático: El ventilador funciona solo cuando el sistema de calefacción o refrigeración está encendido. Circulación: El ventilador funciona de forma aleatoria, aproximadamente, el 35% del tiempo (uso doméstico únicamente).
Configuración de la modalidad del sistema 1 Toque SISTEMA para mostrar las configuraciones del sistema. SISTEMA 2 Toque la opción deseada: Terminado Calefacción: El termostato controla solamente el sistema de calefacción. Refrigeración: El termostato controla solamente el sistema de refrigeración. Apagado: Se apagan los sistemas de calefacción/refrigeración. Automático: El termostato selecciona la calefacción o la refrigeración según fuera necesario, conforme a la temperatura interior.
Cronogramas predeterminados para ahorro de energía Uso empresarial Uso doméstico Este termostato usa las configuraciones de ahorro de energía predeterminadas que pueden disminuir los gastos de calefacción/refrigeración. Para personalizar el termostato, consulte la siguiente página. Refrigeración (sábados y domingos) Período Hora de inicio Calefacción (de lunes a viernes) Refrigeración Calefacción (sábados y (de lunes a domingos) viernes) Despertar 6:00 am 70 °F (21.1 °C) 78 °F (25.
Ajuste de los cronogramas del programa 1 Toque MENÚ. MENÚ 2 Seleccione Crear/editar horario. • Toque Ver/editar para ver la programación completa y realizar ajustes rápidos. Crear / Editar horario • Toque Guíame para crear una programación respondiendo preguntas simples. • Toque Lo haré yo mismo para crear de forma manual un cronograma del programa. Consulte la página 39. Nota: Para disminuir costos, use las configuraciones de ahorro de energía preestablecidas que se describen en la página 37.
Ajuste de los cronogramas del programa Si seleccionó Lo haré yo mismo en la pantalla Crear/editar programación (página 38), siga los siguientes pasos: 1 Seleccione los días para programar, toque Siguiente. 2 Toque Despertar para establecer el horario del período Despertar para los días seleccionados.
Ajuste de los cronogramas del programa 3 Presione s o t para configurar la temperatura de Calefacción y Refrigeración del período Despertar. Luego, toque Terminado. 4 Toque otros períodos (Salir, Regresar, Dormir) para configurar la hora y las temperaturas para cada uno de ellos. Terminado 5 Toque Terminado para guardar y salir. Nota: Toque Borrar período para eliminar los períodos no deseados. Nota: Toque Ventilador ajustes para personalizar las configuraciones del ventilador para cualquier período.
Anulación de las programaciones: uso doméstico 1 Toque s o t para configurar la temperatura (lado derecho de la pantalla) y la hora indicada en Sostener hasta (lado izquierdo). La programación se reanudará cuando finalice el tiempo de “Sostener hasta”. Cambiar a sost. permanente 2 Toque Cambiar a sost. permanente para mantener la misma temperatura hasta que la cambie o reinicie el cronograma del programa. 3 Toque Reiniciar Horario en cualquier momento para reanudar el cronograma del programa.
Anulación de las programaciones: uso empresarial Toque s o t para configurar la temperatura. La temperatura nueva se mantendrá hasta el tiempo de “pausa” que usted configure. • Para cambiar el tiempo de pausa, toque los botones con flechas Sostener hasta. Puede configurar este tiempo hasta el tiempo máximo configurado en la pantalla Duración de la anulación en Preferencias avanzadas (página 38).
Visualización del estado del equipo 1 Toque MENÚ. MENÚ 2 Seleccione Estatus del equipo. 3 Toque s o t para ver el estado de todos los equipos que controla su termostato.
Configuración del mantenimiento en vacaciones: uso doméstico Esta función le permite ahorrar energía mientras se encuentra fuera de casa, y restituye las configuraciones de confort poco antes de que regrese a su casa. MENÚ Modo vaciones 1 Toque MENÚ 2 Seleccione Modo vacaciones.
Configurar programación de días festivos/eventos: uso comercial Esta función contribuye a conservar energía cuando el lugar de trabajo está desocupado durante eventos especiales o días festivos. 1 Toque MENÚ. MENÚ Programador de vacaiones / eventos 2 Seleccione Programador de vacaciones/eventos. 3 Seleccione el ítem que desea programar. • Eventos personalizados le permite configurar otros días para programaciones especiales. • Las opciones de Días festivos de EE.
Configuración de eventos personalizados: uso empresarial Esta función le permite personalizar configuraciones de temperaturas para mantenerlas durante un evento específico. Puede configurar un evento para una fecha específica o un día del mes. El termostato reanuda la programación normal después del evento. Eventos personalizados 1 Seleccione Eventos personalizados del menú Programación de días festivos/ eventos. Crear nuevo evento 2 Seleccione Crear nuevo evento.
Configuración de eventos personalizados: uso empresarial 3 Seleccione Fecha específica o Mes/Día de la semana. • Para la opción Fecha específica, debe seleccionar la fecha de inicio, las configuraciones, la fecha de finalización y la frecuencia del evento. Siguiente • Para la opción Mes/Día de la semana, debe seleccionar un mes, un día de la semana, una semana del mes, las configuraciones, la duración del evento y la frecuencia del evento. 4 Revise las configuraciones y toque Terminado para guardarlas.
Configuración de la programación de días festivos: uso empresarial Esta función le permite personalizar configuraciones de temperaturas para mantenerlas durante días festivos nacionales específicos. El termostato reanuda la programación normal entre uno y otro día festivo seleccionado. 1 Seleccione Días festivos de EE. UU. o Canadá del menú Programación de días festivos/evento. 2 Seleccione Agregar/Editar días festivos. Aparecerá una lista de los días festivos nacionales.
Configuración de la anulación de días festivos: uso empresarial Esta función le permite personalizar configuraciones de temperaturas para mantenerlas desde ahora hasta una fecha específica. El termostato reanuda la programación normal en la fecha que usted seleccione. 1 Toque MENÚ. 2 Seleccione Modalidad de día festivo para mostrar las temperaturas mientras usted se encuentra de vacaciones.
Inicio de la modalidad de ocupación: uso empresarial Esta función mantiene la temperatura en un nivel de ahorro de energía hasta que toque Presionar para iniciar el período de ocupación. Cuando usted llegue, toque el botón para mantener una temperatura confortable mientras la habitación esté ocupada. Toque los botones s o t para configurar la temperatura o la hora de Sostener hasta. La temperatura se mantiene solamente hasta el tiempo que usted configuró.
Cómo personalizar el color de la pantalla Puede personalizar la pantalla del termostato para adaptarla a su decoración. 1 Toque Menú. MENÚ Temas de color 2 Toque Temas de color. 3 Elija el nombre de un color para usar en un fondo predeterminado o seleccione Personalizar para definir su propio color de fondo y texto. • Si selecciona el nombre de un color, la pantalla muestra un ejemplo a la izquierda. Toque Terminado para aceptar esa preferencia.
Configuración de las preferencias Las opciones del menú de preferencias le permiten seleccionar cómo el termostato muestra la información o responde ante ciertas situaciones. MENÚ Preferencias 1 Toque MENÚ y seleccione Preferencias. 2 Seleccione una opción y siga las instrucciones: • Recordatorios • Opciones del programa del servicio eléctrico • Luz posterior • Tecnología Smart Response • Preferencias avanzadas • Restablecer programación predeterminada 3 Toque Terminado para guardar sus configuraciones.
Limpieza de la pantalla del termostato Cuando selecciona la opción Limpiar pantalla, esta se bloquea para que no cambie accidentalmente la configuración mientras limpia. MENÚ Limpiar pantalla 1 Toque MENÚ. 2 Seleccione Limpiar pantalla. Una instrucción le pregunta si desea limpiar la pantalla durante 30 segundos. 3 Toque Sí. Un contador de cuenta regresiva muestra el tiempo transcurrido hasta que se reactive la pantalla. Nota: NO rocíe ningún líquido directamente sobre el termostato.
Ajuste de las configuraciones de seguridad Se pueden utilizar las opciones de seguridad para evitar cambios no autorizados en las configuraciones del sistema. 1 Toque MENÚ y seleccione Configuraciones de seguridad. MENÚ Conf iguraciones de seguridad 2 Seleccione Cambiar modo de bloqueo. 3 Seleccione una opción y siga las instrucciones: Desbloqueado: Acceso total permitido. Parcialmente bloqueado: Solo se puede cambiar la temperatura. Totalmente bloqueado: Acceso no permitido.
Tecnología Smart Response Esta característica (uso doméstico únicamente) permite que el termostato “sepa” cuánto demora el sistema de calefacción/ refrigeración en alcanzar las configuraciones de temperatura programadas, de manera que se alcance esa temperatura a la hora que usted configuró. Por ejemplo: Configure la hora de despertarse a las 6:00 a. m. y la temperatura en 70 °F (21.1 °C). La calefacción se encenderá antes de las 6:00 a. m., para que la temperatura esté en 70 °F (21.1 °C) a las 6:00 a. m.
Purga previa a la ocupación Esta función de uso empresarial enciende el ventilador de 1 a 3 horas antes del período “ocupado”, para brindar un ambiente de trabajo confortable cuando usted llegue.
Protección del compresor El termostato conserva el compresor apagado durante unos minutos antes de volver a arrancar, para evitar daños al equipo. Durante el tiempo que permanece apagado, el mensaje “esperando por el equipo” se muestra en la pantalla.
Conversión automática Esta función se usa en climas en los que el acondicionador de aire y la calefacción se utilizan durante el mismo día. Cuando el sistema está configurado en Automático, el termostato elige automáticamente cuándo calentar o refrigerar, según la temperatura interior. Las configuraciones de calefacción y refrigeración deben tener, al menos, una diferencia de tres grados. El termostato ajustará automáticamente las configuraciones para mantener esta diferencia de tres grados.
Configuración de preferencias avanzadas Puede cambiar las opciones en diversas funciones del sistema. Si bien muchas de las opciones, como las configuraciones que indican el idioma y la temperatura, son las mismas para todas configuraciones, existen otras que dependen del tipo de sistema que posea. MENÚ Preferencias 1 Toque MENÚ. El termostato muestra una lista de opciones. 2 Seleccione Preferencias > Preferencias avanzadas. El termostato muestra la primera pantalla de opciones que puede modificar.
Configuración de preferencias avanzadas Opciones de Preferencias avanzadas (MENÚ > Preferencias > Preferencias avanzadas) Título de la pantalla Configuraciones y opciones Opciones de programación Seleccione la opción No programable o Programable. La opción Programable usa programación predeterminada o personalizada para subir y bajar automáticamente las configuraciones de temperatura en distintos momentos del día. Escala de indicación de temperatura Seleccione Fahrenheit o Celsius.
Configuración de preferencias avanzadas Opciones de preferencias avanzadas (finalización) Título de la pantalla Configuraciones y opciones Duración de la anulación * Seleccione cuánto tiempo se debe mantener la temperatura durante una anulación: 1-10 horas o Sin límite. Recuperación temprana para calefacción * Seleccione No para comenzar la recuperación según la programación o Sí para aumentar la temperatura antes.
Desconexión de la red WiFi Si necesita desconectar el termostato de su red WiFi (por ejemplo, para cambiar el enrutador), siga estos pasos: MENÚ Configuración Wi-Fi 1 Toque MENÚ. 2 Seleccione Configuración WiFi. 3 Toque Desconectar de la red. El termostato mostrará una pregunta para confirmar su selección. Su red Desconocido 4 Toque Sí para confirmar que desea desconectarse de la red. El termostato mostrará la pantalla de configuración WiFi. Desconectar de la red 5 Toque OK para mostrar el menú.
Reconexión de su red WiFi 1 Toque MENÚ. MENÚ 2 Seleccione Configuración WiFi. 3 Toque el nombre de la red que desea utilizar. El termostato puede mostrar una página de contraseña. 4 Para ingresar una contraseña, toque caracteres para deletrear su contraseña de red doméstica, luego toque Terminado. 5 El termostato muestra “Conectándose a su red. Favor esperar...” luego una pantalla de “Conexión satisfactoria.” 6 Toque Siguiente.
Baja del termostato Si usted retira el termostato de su cuenta en el sitio web Total Connect Comfort (por ejemplo, si se muda y deja el termostato), siga los siguientes pasos: 1 Desde mytotalconnectcomfort.com, inicie sesión en su cuenta. 2 En Mi cuenta, seleccione Editar mi perfil. 3 Haga clic en el botón Borrar mi cuenta. Su termostato mostrará un botón anaranjado que sugiere Registrarlo a través de Internet.
Cambio de la configuración del sistema Si el termostato se restablece a la configuración predeterminada en fábrica, debe cambiar la configuración del termostato para adaptarlo a su sistema de calefacción/refrigeración. Su contratista hizo esto cuando instaló el termostato. Siga estos pasos para configurar el termostato o llame a su contratista para que lo haga. MENÚ Configuración del sistema 1 Toque MENÚ. El termostato muestra una lista de opciones. 2 Seleccione Configuración del sistema.
Cambio de la configuración del sistema Note: Para obtener más información, toque el botón anaranjado de ayuda que se encuentra en cualquier pantalla. Opciones de la configuración del sistema (MENÚ > Configuración del sistema ) Título de la pantalla Configuraciones y opciones Idioma English/Français/Español. Termostato instalado en Hogar/comercio (El termostato se utiliza en un ambiente residencial (predeterminado) o comercial).
Cambio de la configuración del sistema Cambio de la configuración del sistema (finalización) Título de la pantalla Cantidad de etapas de refrigeración Cantidad de etapas de calefacción Control del ventilador Tipo de válvula de cambio Cantidad de etapas del compresor de la bomba de calor Calefacción de reserva 69-2814EFS—03 Configuraciones y opciones Seleccione 1 etapa (predeterminado) o 2 etapas. Si no está seguro, observe cuáles cables ha conectado: Cable ‘Y’ solamente (1 etapa) o ‘Y’ y ‘Y2.
Configuración del sistema Nota: Su contratista ya configuró su termostato. No es necesario que haga ninguna configuración. Siga estas instrucciones solo si restablece la configuración predeterminada en fábrica. Antes de conectarse a su red WiFi, debe configurar las opciones iniciales del termostato para establecer su sistema de calefacción/ refrigeración: Siguiente • Idioma • Hogar o Comercial En otro momento, puede personalizar otras opciones.
Configuración del sistema 3 Toque Siguiente o identifique la ubicación del termostato—toque THERMOSTAT y siga el resto de las instrucciones. 4 Seleccione lo que controlará su termostato y toque Siguiente. Nota: Para obtener más información, toque el botón anaranjado de ayuda que se encuentra en cualquier pantalla.
Configuración del sistemato 5 Seleccione el tipo de sistema y toque Siguiente. El tipo de sistema determina otras opciones para finalizar el proceso de configuración inicial. Utilice la lista de comprobación del paso 6d cuando haga uso de las opciones. 6 Toque Siguiente después de hacer uso de las opciones de cada pantalla. Siguiente 7 Toque Terminado en la última pantalla. El termostato muestra una opción para conexión a su red Wi-Fi.
Preguntas frecuentes PP: ¿Mi termostato seguirá funcionando si pierdo la conexión WiFi? RR: Sí, el termostato pondrá en funcionamiento el sistema de calefacción o refrigeración con o sin conexión WiFi. PP: ¿Cómo encuentro la contraseña de mi enrutador? RR: Comuníquese con el fabricante del enrutador o revise la documentación del enrutador. QQ: ¿Por qué no puedo ver la página de configuración de la conexión WiFi? AA: Probablemente, esté conectado solo a su enrutador, y no al termostato.
Preguntas frecuentes puede abrir el sitio, apague el módem de Internet durante algunos segundos y vuelva a encenderlo. PP: Me registré en el sitio web Total Connect Comfort, pero no pude iniciar sesión con mi nueva cuenta. RR: Revise su correo electrónico y asegúrese de haber recibido un mensaje de activación. Siga las instrucciones para activar su cuenta y, luego, inicie sesión en el sitio web.
Cómo obtener ayuda y reaccionar ante las alertas Su termostato proporciona dos tipos de asistencia. En caso de que estas opciones de asistencia no aclaren sus dudas, consulte las preguntas más frecuentes (páginas 50-51) y los consejos sobre la localización y solución de problemas (página 55). Ayuda Ayuda en la pantalla La mayoría de las pantallas incluyen un botón anaranjado de ayuda. 1 Toque Ayuda para visualizar las instrucciones de uso de la pantalla.
Cómo obtener ayuda y reaccionar ante las alertas Alertas de pantalla Su pantalla principal mostrará un botón grande anaranjado cuando necesite corregir una configuración o un problema del sistema. Reemplace el filtro de aire 1 Toque el botón, el termostato muestra instrucciones para finalizar la tarea sobre la cual se le alertó. Presionar para info 2 Toque OK en la pantalla de instrucciones y luego lleve a cabo la tarea. Cuando la tarea haya finalizado, el botón de alerta no seguirá mostrándose.
Actualizaciones del software Honeywell realiza actualizaciones periódicas del software para este termostato. Las actualizaciones se efectúan automáticamente a través de su conexión WiFi. Todas sus configuraciones permanecen guardadas, de modo que no necesita hacer cambios después de que ocurra la actualización. Las actualizaciones se realizan durante las primeras horas del día. Una vez que su termostato reciba el software, este se reinicia y se muestra brevemente el logotipo de Honeywell.
Localización y solución de problemas Si tiene dificultades con el termostato, intente seguir las sugerencias que se indican a continuación. La mayoría de los problemas se pueden solucionar de manera fácil y rápida. La pantalla está en blanco El sistema de calefacción o refrigeración no responde • Revise el interruptor de circuito y, si es necesario, reinícielo. • Asegúrese de que el interruptor de energía del sistema de calefacción y refrigeración esté encendido.
Glosario Sistema de refrigeración/calefacción de bomba de calor Las bombas de calor se utilizan para calentar y refrigerar una casa. Si su termostato existente tiene una configuración de calefacción auxiliar o de emergencia, es probable que tenga una bomba de calor. Sistema de calefacción/refrigeración convencional Estos sistemas no cuentan con una bomba de calor. Incluyen controladores de aire, equipos de calefacción o calderas que funcionan con gas natural, aceite o electricidad.
Información reguladora Declaración de conformidad con las regulaciones FCC (Sección 15.19) (solo en los EE. UU.) Este dispositivo cumple con la Sección 15 de las regulaciones FCC. El funcionamiento está sujeto a las dos condiciones siguientes: 1 Este dispositivo no debe causar interferencia perjudicial. 2 Este dispositivo deberá aceptar cualquier interferencia que se reciba, incluso la interferencia que pudiese causar el funcionamiento no deseado. Advertencia de la FCC (Sección 15.21) (solo en los EE. UU.
Garantía limitada de 5 años Honeywell garantiza este producto, a excepción de la batería, por el término de cinco (5) años contra cualquier defecto de fabricación o de los materiales, a partir de la fecha de compra por parte del consumidor, en condiciones normales de uso y servicio. Si en cualquier momento durante el período de garantía se verifica que el producto tiene un defecto o que funciona mal, Honeywell lo reparará o reemplazará (a elección de Honeywell).
69-2814EFS-03 Automatización y control desenlace Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Ltd 705 Montrichard Avenue Saint-Jean-sur-Richelieu, Québec J2X 5K8 yourhome.honeywell.com ® Marca Registrada en los E.U.A. Apple, iPhone, iPad, iPod touch y iTunes son marcas comerciales de Apple Inc. Todas las demás marcas comerciales son propiedad de sus respectivos dueños. © 2013 Honeywell International Inc. 69-2814EFS—03 MS Rev. 12-13 Impreso en EE. UU.