Manual

T10 PRO SMART THERMOSTAT WITH REDLINK
33-00462—01 30
• Select “let me choose” to select the days you want
grouped. (Ex: 5-1-1 schedule with M-F the same and
Sat & Sun each individual).
• Once the selected days are chosen touch “Next”.
• Set the wake time by scrolling up to down by the hour,
the minute, and AM or PM.
• Touch “Next”.
• If you are using RedLINK wireless indoor sensor(s). Set
the Wake priority to “selected rooms” or “Active Rooms”.
If “selected Rooms” is chosen you can choose the
room(s) you want to use for temperature control during
Wake.
• Touch “Next”.
• Set the Cool and Heat setpoints for the Wake schedule
period.
• Touch “Next”.
• Set the Wake fan setting to Auto, on, or circulate. (See
“Setting the Fan” on page 32 for more information.)
• Touch Next.
• If “Someone is Home All day” is selected, the
thermostat will follow the same heat/Cool/Fan settings
as the Wake uses for the Return and Home schedule.
The thermostat will skip ahead to the sleep schedule
settings. If “Someone is Home All day”, is not selected,
the Away and Home settings need to be entered.
• Set the Away, Home, and Sleep settings using the same
format as described for the Wake setting.
• If you had not selected all days are scheduled the same,
repeat these steps for the other days or groups of days.
Schedule override
With thermostat in heat, cool, auto, or em heat mode,
press the up or down arrow to change the setpoint. (if
thermostat is in auto mode, you need to press “heat to” or
“cool to” first). If scheduling is enabled it will say “Hold
until” and show a time at the bottom of the screen. Touch
this. Display says “Use current temperature, fan, and
comfort priority settings until…”
Options are:
•Next Period
• A Specific Time
•Permanently
• Remove hold
Choose the appropriate option. If you chose “A Specific
time”
Select the time you want to hold to.
Press “Done” to return to Home screen.
Main Menu
From Home Screen, press the menu icon at bottom of the
display (3 horizontal lines). (If this is not shown at home
screen, touch screen to wake display first).
Main Menu Options
System mode
(Available modes vary depending on how the thermostat
was configured)
•Heat
•Off
• Cool
• Auto (see “Auto Changeover operation” on page 37)
• Em Heat (see “Em Heat and auxiliary heat operation”
on page 37)
Fan
(Fan setting not available for all system types)
• Auto (Fan only runs with a call for heat or cool, or if set
to run with Hum, dehum, or vent call)
• On (fan runs continuous)
• Circulate (fan runs randomly approx. 33% of the time)
Priority
If wireless indoor temperature/humidity/motion sensors
are used, select which sensors are used for temperature
control. Can choose active sensor (ones detecting
motion) or manually select which sensors to use.
Schedule
• Create new schedule – (Set a time-based schedule)
• Disable schedule
• Reset to default Schedule
NOTE: To enable geofencing, us the Honeywell Home
app.
Management:
Devices & Sensors
• View the temperature and humidity reading from
individual sensors
• Identify a wireless indoor sensor
• Add a new wireless indoor sensor
• Remove a wireless indoor sensor
Thermostat information
• Mac Address
• IP Address
•Date Code
• Model Number
•Build Date
• Collection Version
• Wi-Fi Bootloader Version
• Wi-Fi Application Version
• RedLINK Application Version
Equipment Status
• System mode
• Heat stages (on or off)
• Cool stages (on or off)
• Fan on or off
• IAQ (Hum, Dehum, or Vent) on or off
Dealer Information
• Model number
• Date code
• Dealer company name and contact information if
provided by installer (See “Installer Options Menu” on
page 31).
Configuration
•Wi-Fi
•Security
•Preferences
• Installer Options (See “Installer Options Menu” on
page 31)
Installer Options
To access the Installer options menu
1. Touch the menu icon (3 horizontal lines at bottom of
display)
2. Scroll down and touch “Thermostat Information”.