Honeywell Wireless Thermo-Hygrometer TABLE OF CONTENTS INTRODUCTION 3 PRODUCT OVERVIEW 4 REMOTE SENSOR 7 BEFORE YOU BEGIN 8 BATTERY INSTALLATION 9 LOW BATTERY WARNING 10 GETTING STARTED 10 COMFORT LEVEL INDICATORS 11 MAXIMUM AND MINIMUM MEMORY 12 AUTO-SCANNING 12 LOST COMMUNICATION 13 TRANSMISSION COLLISION 14 PRECAUTIONS 14 SPECIFICATIONS 16 FCC STATEMENT 17 DECLARATION OF CONFORMITY 18 STANDARD WARRANTY INFORMATION 19 (TM005X) USER MANUAL 2
INTRODUCTION PRODUCT OVERVIEW Thank you for selecting the Honeywell Wireless Thermo-Hygrometer with Remote Sensor. This device monitors and displays temperature and humidity both indoors and outdoors from up to three remote locations. In this package you will find: MAIN UNIT FEATURES • One main unit (receiver) • One remote sensor (transmitter) TS33 • One User Manual Please keep this manual handy as you use your new item.
REAR VIEW FRONT VIEW A. TEMPERATURE AND HUMIDITY INFORMATION IN A TWO LINE LCD DISPLAY E F G H E. WALL-MOUNT RECESSED OPENING B D C B. CHANNEL BUTTON • Selects the desired remote channel or indoor readings C. SEARCH BUTTON • Enforces the remote sensors signal search D.
• Selects the desired channel E. WALL-MOUNT RECESSED OPENING REMOTE SENSOR FEATURES • Remote temperature and humidity transmission to the main unit via 433 MHz signal • • • • • 100 feet (30 meters) transmission range without interference LCD display of measured temperature and humidity Three (3) channels selection Selection of the temperature display in Celsius or Fahrenheit Case can be wall mounted using built-in hanger • Keeps the remote sensor on the wall F.
NOTE: 1. Avoid pressing any buttons on the main unit before the remote temperature is displayed for about 2 minutes. 2. The effective operating range may be influenced by the surrounding building materials and how the receiver and transmitter are positioned. 3. Place the remote sensor so that it faces the main unit (receiver), minimizing obstructions such as doors, walls, and furniture. 4. Though the remote sensors are weather-resistant, they should be placed away from direct sunlight, rain or snow.
The remote temperature and humidity for channel one, two and three Indicator Temperature Humidity Shows current can be recalled by pressing CHANNEL button. The wave icon is located above the remote channel number and indicates the reception status from the remote sensor.
displayed one-by-one automatically for 4 seconds each in the following sequence: Indoor, Channel 1, Channel 2 and Channel 3. • Remove the batteries from the battery compartment and reinstall them in the same manner. Remote sensor LED indicator will flash showing transmission of the signal. • Remove the batteries from the main unit and reinstall them in the same manner. • The remote temperature appeared on the main unit’s display will show that transmission is being received successfully.
invalidate the warranty and may cause damage. These units contain no user-serviceable parts. • • Use only fresh batteries. Do not mix new and old batteries. Read the user's manual thoroughly before operating the units. SPECIFICATIONS Main Unit Indoor Temperature Proposed operating range: -5.0°C to +50.0°C/23.0°F to 122.0°F Temperature resolution: 0.1°C/0.
FCC STATEMENT DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
STANDARD WARRANTY INFORMATION This product is warranted from manufacturing defects for one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and repair. Note that online product registration is required to ensure valid warranty protection. To register your product, go to our Company website at: www.hidekielectronics.us . Click Online Product Registration under the Customer Support menu.