Smart Dehumidifier User Manual - Honeywell Air Comfort App Read and save these instructions before use Model: TP30A / TP50A / TP70A Series www.jmatek.com E-mail: info@jmatek.
USER MANUAL - HONEYWELL AIR COMFORT APP Thank you for purchasing a Honeywell Smart Dehumidifier. This user manual is intended to provide you with important information needed to set up, operate, maintain and troubleshoot this product. DOWNLOADING THE APP The Smart Dehumidifier has added features to allow you to operate the dehumidifier remotely using a smart device, and to use voice commands through an Amazon Echo device, to control the unit.
REGISTERING AN ACCOUNT 1 3 2A 2B a. Open the app. b. Tap Register. 4 a. Set the password. b. Tap Done. a. Enter your email* (2A) or mobile phone number (2B). b. Tap Get Verification Code. a. Enter the verification code. b. The verification code should be recieved & entered within 60 seconds. If time is exceeded, go back and get another code. 5 6 a. Tap Create Family. a. Set the Family Name and Family Location. b. Mark the location of the dehumidifier. c. Tap Done.
CONNECTION METHODS FOR WI-FI SETUP The Smart Dehumidifier has two different setup modes: CF (Quick Connection): The CF mode is a quick and simple way to set the unit up. AP (Access Point): The AP mode uses a direct local Wi-Fi connection between your phone and the dehumidifier to upload the network details. Before starting the setup, please ensure that your Smart Dehumidifier is plugged in and turned OFF (in Standby Mode) for the connection type you are attempting.
CONNECTION METHODS FOR WI-FI SETUP (CONTINUED) CONNECTING IN CF MODE (CONTINUED) 3 a. Switch on the dehumidifier. b. On the Dehumidifier, Press the displays on the unit. c. Tap Next. 4 a. Choose the Wi-Fi network. b. Enter the Wi-Fi password. c. Tap Confirm. button 6 times until 6 5 a. Wait until the connection is completed. EN 4 a. Tap Done.
CONNECTION METHODS FOR WI-FI SETUP (CONTINUED) CONNECTING IN AP MODE 1 a. Tap Add Device. 2 3 a. Tap Dehum icon. a. Tap AP Mode in the top right corner. 4 a. Switch on the dehumidifier. b. On the Dehumidifier, press the displays on the unit. c. Tap Next.
CONNECTING THE APP IN AP MODE (CONTINUED) CONNECTING IN AP MODE (CONTINUED) 5 a. Choose the Wi-Fi network. b. Enter the Wi-Fi password. c. Tap Confirm. 8 a. Wait until the connection is completed. 6 7 a. Tap Go to Connect. 9 a. Tap Done. EN 6 a. Tap the Smartlife-XXXX network (Wi-Fi board number). b. Once connected, press the home/back button on your device and go back to the Honeywell Air Comfort App.
USING THE APP MAIN SCREEN 1) Family (User) Settings 2) Current Weather Conditions 1 3 - Dry: 0-40%RH - Comfortable: 40-70%RH - Moist: above 70%RH 8 8) Room Locations 9 9) a. Device Sequence b. Room Management 10) a. Family/User Management b. Message Center c. Help Center d. Settings - Voice ON/OFF - Push Notifications ON/OFF 10 - About - Clear Cache - Log Out c. Outdoor Air Pressure d. Outdoor Wind Speed 4 5) Home Button 6) Smart Control Button 7) Adding a device 2 3) a.
USING THE APP (CONTINUED) BASIC CONTROLS 2 1 a. Tap Dehumidifier. a. Tap to switch the dehumidifier on/off. Device settings: a. Device Name b. Device Location c. Check Device Network d. Third-party Control (Voice Activated Control) e. Share Device f. Create Group g. Device Information h. Feedback i. Add to Home Screen j. Check for Firmware Upgrade k. Remove Device l.
USING THE APP (CONTINUED) SETTING THE FAN SPEED a. Tap fan speed button. b. Select Low or High fan speed. SETTING THE TIMER Save settings Time selection Timer Off settings Select for unit to turn OFF after unit completes selected time period. Timer days selection Timer On settings Select for unit to turn ON after selected time period of being idle ends. a. Tap Timer set button. b. Tap Add Timer. c. Set the timer(s). d. When the timer is set, tap Save.
USING THE APP (CONTINUED) ADDING A SCENARIO The Scenario feature allows you to set up multiple Dehumidifiers under one Scenario and control them on one dashboard as needed. When you click on the Scenario, all Dehumidifiers will switch ON at the same time using previous settings. E.g.: If you had set up a Dehumidifier in the Living Room and one in the Basement, you can create a “Scenario 1” to switch both dehumidifiers on at the same time. 1 a. Tap Smart control button. b. Tap Add Scenario. 2 3 a.
USING THE APP (CONTINUED) ADDING AN AUTOMATION SCENARIO The Automation Scenario feature allows you to set up multiple dehumidifiers under one Scenario and it will automatically activate those dehumidifiers when there is a change in outdoor environment conditions. Pre-Set Outdoor Humidity Conditions: Dry: 0-40%RH Comfortable: 40-70%RH Moist: above 70%RH When a change in outdoor condition is met, the pre-set Automation Scenario will switch ON or OFF all Dehumidifiers set up in that Automation Scenario. E.
USING THE APP (CONTINUED) ADDING AN AUTOMATION SCENARIO (CONTINUED) 3 4 a. Tap Device. b. Tap Dehumidifier. a. Select function(s) for the dehumidifier to perform, when the automation scenario condition(s) is/are met. b. Tap Next. 5 6 a. Tap Add Action to set the action to be performed when the automation scenario condition(s) is/are met. b. Tap Next. a. Tap Effective Period to select when the automation scenario should activate. b. Tap Next. c. Tap Save.
FOR VOICE ACTIVATED CONTROL Connecting to an Amazon Echo Device: nsure your Amazon Echo device is switched on and connected to the Wi-Fi NOTE: E network. a. Open the "Amazon Alexa" app on your smart device. b. Tap and then Skills & Games. c. Tap and type "Honeywell Air Comfort". Tap the Honeywell Air Comfort skill. d. Tap Enable To Use button. e. Enter your Honeywell Air Comfort App login and password. f. Tap Link Now and then tap Authorize. g. Tap Done. h. Tap Discover Device. Choose "Dehumidifier".
TROUBLESHOOTING Problem Possible Cause Solution Mobile smart device’s Wi-Fi is switched off. Unable to register/login to an account. Switch on the mobile phone’s Wi-Fi. Install a Wi-Fi extender (not included). Wi-Fi signal is too weak. Dehumidifier is not connected to the the electrical outlet. Move the smart dehumidifier closer to the Wi-Fi router. Connect the dehumidifier to the socket-outlet. Install a Wi-Fi extender (not included). Wi-Fi signal is too weak.
TROUBLESHOOTING (CONTINUED) Problem Possible Cause Solution The number of connected devices reached the limit of the router. Dehumidifier cannot pair with the Honeywell Air Comfort App. (Continued) The router has enabled the wireless MAC address filter. EN 15 Turn off the Wi-Fi functions of some of the connected devices. Re-configure the router. Remove the device from the MAC address filter on the router. Ensure the device is not prohibited by the router to connect to the network.
JMATEK Limited Manulife Financial Centre, Kwun Tong, Hong Kong Phone: 852-2559-5522 Email: info@jmatek.com Web: www.jmatek.com Made in China © 2020 JMATEK Limited. All rights reserved. The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. This product is manufactured by Airtek Int'l Corp. Ltd. (subsidiary of JMATEK Ltd.).