Dehumidifier Manual

SLEEP MODE

The LED display brightness will be reduced when the unit is in Sleep Mode. Press the to activate

the Sleep Mode. When Sleep Mode is activated the indicator light will be illuminated. There

is a one-minute window period in which you can adjust the settings such as humidity and fan speed.

After one minute has lapsed, the top display will shut off, except the indicator light. Press any

button to deactivate Sleep Mode.

PTC HEATER MODE

Press the to activate PTC Heater Mode, the indicator light is illuminated. The PTC Heater

function is suitable for environments with a temperature of 0°F to 41°F (0°C to 5°C). This

technology helps to add heat to the dehumidifying process which helps to improve the

efﬁciency, and increases the dehumidifying capacity of the unit.

AUTO DRAIN PUMP MODE*

The Auto Drain Pump function helps to remove condensation vertically and horizontally. Press the

to activate the Pump function, the indicator light will be illuminated.

*THIS IS ONLY FOR MODEL TP70P WITH BUILTIN DRAIN PUMP

THIS IS ONLY FOR MODEL TP50H WITH PTC TECHNOLOGY

FUNCTION BUTTONS (CONTINUED)

USE & OPERATION (CONTINUED)

AUTO RESTART FUNCTION

AUTOMATIC DEFROST

This unit is equipped with an Auto Restart feature. When there is a power outage, the dehumidiﬁer

will automatically resume all its previous settings upon regaining power.

Frost may build up on the internal coils of the unit. When there is frost build up, the internal

compressor will turn off and the fan will continue to run until the frost has melted. Once the internal

coils have defrosted and dried, the compressor or fan will automatically restart and dehumidifying

will resume.