user manual

Operating the Analyzer
42 UDA2182 Universal Dual Analyzer Product Manual January 2009
Status
Display
Parameter Status
(Read Only)
Status Definition
Logic Status
Logic 1
Logic 2
Logic 3
Logic 4
ON
Off
Read Only
Input Status
In 1 Fault
In 2 Fault
Digital In 1
Digital In 2
OK or Fail
OK or Fail
On or Off
On or Off
Read Only – depends on the Input selected
Output
Levels
Output 1 mA
Output 2 mA
Output 3 mA
Output Level in
Milliamps
Read Only – depends on the Output type selected at
setup “Outputs”, “Output n”, “Source”:
None
Input 1 PV
Input 2 PV
Input 1 Tmp
Input 2 Tmp
Pharma Out 1
Pharma Out 2
Math 1
Math 2
Math 3
Math 4
Func Gen 1
Func Gen 2
Switch 1
Switch 2
Sum
Difference
Ratio
%Passage
%Rejection
PID 1
PID 2
See Table 6-6 for configuration.
Relay States
Relay 1
Relay 2
Relay 3
Relay 4
State of the
relay
Read Only – state depends on the Output source
selected at Relay Setup Group, parameter “Relay
Types”:
Digital Output (On or Off)
Time Proportional (Value)
Frequency Proportional Output (Value)
On/Off (On or Off)
Pulse Out (On or Off)
See Table 6-7 for configuration.
Monitor
Status
Monitor 1
Monitor 2
Monitor 3
Monitor 4
ON
Off
Read Only – State depends on the output of the
analog monitor blocks.