User Guide

TStatSpec
TM
11
CONFIGURATION
Create a Configuration
Description:
To work in TStatSpec™ you must define a configuration if
none exists. If a configuration exists, it must be open.
Purpose:
Create a new configuration.
Procedure:
To create a new configuration:
1. Press CTRL + N or choose New from the Configura-
tion menu to open the New Configuration dialog box.
Fig. 13. New Configuration
2. Select the directory and enter a name for the configura-
tion.
3. Set the configuration attributes as given in the fields
below.
4. Click OK to save settings and close the dialog box.
Fields
Name Definition
Configuration Directory TStatSpec™ lists a default directory. Enter new directory name or click Path to locate a directory.
Configuration name Name of configuration (for example, RESTAURANT). Use valid DOS directory characters, up to
32.
Engineering Units Click down arrow to view choices (Standard International [SI] Units [metric] or English). To display
temperature in degrees Fahrenheit, select English.
Buttons
Name Definition
Path Opens the Browse for Folder dialog box to select a folder under which the configurations are
placed.
OK Creates a configuration, adds the configuration folder to the directory and closes the dialog box. If
a configuration with the same name exists then the configuration will not be created.
Cancel Closes the dialog box. Any information entered is lost.
Help Displays help for this topic.