User Guide

TStatSpec
TM
4
QUICK START
Quick Start-Apply
Description
If you are new to TStatSpec™, the Quick Start Tutorial will help
you get started right away by guiding you through the process
of creating a sample configuration.
The Quick Start Tutorial assumes you have a basic knowledge
of building management systems and configurations. In
addition, it is assumed you have basic knowledge of control
fundamentals, theory and types of controls as related to
building management control. You may need access to the
glossary or to other engineering data not contained in this help
file. For maximum usability, treat the Quick Start Tutorial
separately from the remainder of the User’s Guide (Help).
When TStatSpec™ opens with no configurations, the
workspace (see figure below) is empty and there are no
controller icons in the toolbar.
The example shows a toolbar with available controller icons.
To view and enable the controller icons in your toolbar, you
must have an open configuration. During this exercise, you
will learn how and why this works..
Quick Start-New Configuration
Procedure
START BY CREATING A NEW CONFIGURATION:
1. Press Ctrl+N to open the New Configuration dialog
box. You can also select New from the Configuration
menu or click the New Configuration button.
2. Select or enter a directory in the Configuration Direc-
tory field.
3. Enter a configuration name in the Configuration name
field. For example, PROJECT1.
4. For the purposes of this exercise, leave the remaining
fields at their default settings and click OK.