Install Instructions

V4046C, V8046C MAGNETIC VALVES
66-2008—3 6
Maintenance
WARNING
Electrical Shock Hazard.
Can cause serious injury or death.
Disconnect the power supply before replacing the
solenoid coil. More than one disconnect can be
involved.
The V4046C and V8046C Magnetic Valves are built to give
long and reliable service without attention. If necessary, the
solenoid coil is replaced as follows (see Fig. 6):
1. Disconnect the power supply before replacing the
solenoid coil.
2. Remove the nut on top of the valve by turning it
counterclockwise .
3. Lift the powerhead assembly off the spindle.
4. Disconnect and remove the solenoid coil.
5. Connect the replacement coil and reassemble.
NOTE: The valve need not be removed from the pipe
installation to change the solenoid coil.
Fig. 6. Removing the solenoid coil.
NUT
CASE
COIL
VALVE BODY
COVER
M20747
INSULATING
PAPER