Manual

V5013N THREE-WAY THREADED GLOBE VALVE
63-2549—3 2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).
2. Honeywell Customer Care
1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
SPECIFICATIONS
IMPORTANT
The specifications given in this publication do not
include normal manufacturing tolerances. Therefore,
an individual unit may not exactly match the listed
specifications. Also, this product is tested and
calibrated under closely controlled conditions and
some minor differences in performance can be
expected if those conditions are changed.
Models:
V5013N Valve: Three-way mixing valve for water or glycol.
NPT-threaded pipe connections. Constant total flow. Push
down valve stem to close bottom (B) port.
Dimensions: See Fig. 1.
Valve Sizes and Flow Capacities: See Table 1.
Pipe Connections: Internally-threaded NPT connections.
Seat:
1/2 in.: Replaceable stainless steel (upper), replaceable brass
(lower).
3/4 in. to 2 in.: Integral brass (upper), replaceable brass
(lower).
ANSI Body Class: 150 psi.
Stem: Stainless steel.
Plug: Brass.
Stroke: 3/4 in. (20 mm).
Approximate Leakage Rate: 0.05 percent C
v
.
Rangeability: 50:1 per VDI/VDE 2173.
Body Material: Red brass.
Packing: Spring-loaded, carbon fiber reinforced PTFE V-rings.
Close-Off Pressure Ratings: See Fig. 2 and Table 2.
Pressure-Temperature Ratings:
Water: 36°F to 248°F, 217 psi (15 bar).
248°F to 337°F, 185 psi (12.8 bar).
Maximum Water Differential Pressure: 230 psid (15.8 bar).
Maximum Differential for Quiet Water Service: 20 psid.
Valve Flow Characteristics:
Port A-AB: Equal percentage.
Port B-AB: Linear.
NOTE: Movement of the valve stem at any point of the flow
range does not significantly change the total flow rate
at the AB outlet port (constant total flow).
Valve Design Life: 250,000 full cycles at maximum rated
temperature.
Replacement Parts: See Fig. 3 and Table 3.
Motor and Linkage Selection:
Table 1. Valve Size and Flow Capacities.
Electric Pneumatic
ML6421/ML6425 MP953C (5 and 8 in.)
ML7421/ML7425 MP953E (5 and 8 in.)
ML7984/ML6984 —
Modutrol IV with Q5001 —
Damper DCA with Q5020 —
Size (in.)
Capacity (C
v
)
1/2 2.9
4.7
3/4 7.3
111.7
1-1/4 18.7
1-1/2 29.3
246.8