Manual

ManualsBrandsHoneywell ManualsHeating Supplies2" 3-way Globe Mixing Valve

PRODUCT DATA

63-2549-3

® U.S. Registered Trademark

V5013N

Three-Way Threaded Globe Valve

APPLICATION

The V5013N is a three-way threaded globe valve that controls

hot water, cold water, and glycol solutions (up to 50 percent

concentration) in heating or cooling HVAC applications. The

valve is used for mixing service to direct flow from one of two

inlets to a common outlet in two-position or modulating control

systems.

FEATURES

• Red brass body with NPT-threaded connections.

• Stainless steel stem and brass plug.

• Low seat leakage rate (≤0.05 percent of C

• Spring-loaded, self-adjusting packing.

• 50:1 rangeability per VDI/VDE 2173.

• Constant total flow throughout full stem travel.

• Accurate positioning to ensure state of the art

temperature control.

• Sizes range from 1/2 in. to 2 in.

• Suitable for pneumatic or electric/electronic actuation.

• Repack and rebuild kits available for field servicing.

Summary of content (8 pages)

PAGE 1
V5013N Three-Way Threaded Globe Valve PRODUCT DATA FEATURES • Red brass body with NPT-threaded connections. • Stainless steel stem and brass plug. • Low seat leakage rate (≤0.05 percent of Cv). • Spring-loaded, self-adjusting packing. • 50:1 rangeability per VDI/VDE 2173. • Constant total flow throughout full stem travel. • Accurate positioning to ensure state of the art temperature control. • Sizes range from 1/2 in. to 2 in. • Suitable for pneumatic or electric/electronic actuation.
PAGE 2
V5013N THREE-WAY THREADED GLOBE VALVE SPECIFICATIONS IMPORTANT The specifications given in this publication do not include normal manufacturing tolerances. Therefore, an individual unit may not exactly match the listed specifications. Also, this product is tested and calibrated under closely controlled conditions and some minor differences in performance can be expected if those conditions are changed. Models: V5013N Valve: Three-way mixing valve for water or glycol. NPT-threaded pipe connections.
PAGE 3
V5013N THREE-WAY THREADED GLOBE VALVE Y2 Y1 Y1,2 B C VALVE SIZE (in) 1/2 3/4 1 1-1/4 1-1/2 2 A A (in) B (in) Y1 Y2a STEM FULLY UP C (in) 3-1/4 (83) 1-9/16 (40) 2-9/16 (65) 4-3/16(107) 5-15/16(151) 4-1/16 (103) 4-3/16 (106) 4-3/4 (120) 1-13/16 (46) 5-1/4 (134) 2-5/8 (67) 2-7/8 (73) 3-1/16 (77) 3-5/16 (84) a Y2 WITH STEM EXTENSION FOR MP953C,E (8 IN. ONLY) M17379A Fig. 1. V5013N body dimensions in in. (mm). Table 2.
PAGE 4
V5013N THREE-WAY THREADED GLOBE VALVE SPRING RANGE PSI (kPa) 4-11 (30-75) 1 8-12 (55-85) 7 2 (50) (15) 11 (75) 4 (30) 12 (85) 8 (55) 8 (55) 1 (5) 12 (85) 3 (20) 13 (90) 7 (50) 9 (60) 0 (0) 13 (90) 2 (15) 14 (95) 6 (40) V5013N: 1/2-INCH TO 2-INCH VALVE BODIES WITH 5-INCH DIRECT ACTING PNEUMATIC ACTUATOR Cv 2.9 Cv 4.7 10 (70) 14 (95) 1 (5) 11 (75) 15 (105) 0 (0) 15 (105) 5 (35) 16 (110) 4 (30) 16 (110) 17 (115) 3 (20) 13 (90) 17 (115) 18 (125) 2 (15) 14 (95) 18 (125) .
PAGE 5
V5013N THREE-WAY THREADED GLOBE VALVE SPRING RANGE PSI (kPa) 3-7 (15-50) 4-11 (30-75) 1 8-13 (55-90) V5013N: 1/2-INCH TO 2-INCH VALVE BODIES WITH7-1/8 INCH REVERSE ACTING PNEUMATIC ACTUATOR 7 (50) 3 (20) 11 (75) 4 (30) 13 (90) 8 (55) 8 (55) 2 (15) 12 (85) 3 (20) 14 (95) 7 (50) 9 (60) 1 (5) 13 (90) 2 (15) 15 (105) 6 (40) Cv 4.
PAGE 6
V5013N THREE-WAY THREADED GLOBE VALVE IMPORTANT 1. Do not lift the valve by holding the stem. 2. Do not mount the valve with the stem pointed lower than horizontal. 3. Mount the valve with the flow arrow pointed in the direction of flow through the valve. 4. Mount the valve between aligned pipes. Mounting the valve on pipes that are not aligned causes leakage at the valve to pipe connection. 5. Ensure complete engagement on pipe to valve body threads. 6.
PAGE 7
V5013N THREE-WAY THREADED GLOBE VALVE Threaded Valve Bodies Threading on threaded bodies conform to NPT. V5013N MIXED DISCHARGE WATER TO HEAT LOAD AB A B IMPORTANT 1. Before installing linkage and actuator, make sure that the valve stem operates freely. Impaired stem operation can indicate that the body was twisted or the stem was bent. Either of these conditions can require valve replacement. 2. Align the pipes squarely with the valve at each end connection. 3.
PAGE 8
V5013N THREE-WAY THREADED GLOBE VALVE CHECKOUT 3. Use the following procedure to check for proper valve operation: 1. Check the valve body and connections for leaks. 4. IMPORTANT Before installing linkage and actuator, make sure that the valve stem operates freely. Impaired stem operation can indicate that the body was twisted or the stem was bent. Either of these conditions can require valve replacement. 2.