Submittal Sheet

ManualsBrandsHoneywell ManualsGas Valves & ControlsLarge Body Low Pressure Integrated Valve w/ On-Off Safety Shut-Off (Double Seal)

SPECIFICATION DATA

66-2039-1

® U.S. Registered Trademark

V5097A-E

Industrial Gas Valves

FEATURES

• Used with natural or liquefied petroleum (LP)

gases.

• V5097 normally closed valves are rated for final

shutoff service (safety shutoff).

• V5097A,C,D,E Valves are for On-Off service.

• V5097B Valve has a characterized guide and in

combination with the V4055, V4062 and V9055

Fluid Power Actuators, provides slow-opening,

HI-LO-OFF, and modulating functions,

respectively

•V5097C,E Valves have a double seal and are used

with V4055D,E Fluid Power Actuators to provide

proof-of-closure switch and valve seal overtravel

interlock.

• V5097D,E Valves are for high pressure

applications (see Table 1).

• Two valve body types (small and large)

applicable to seven pipe sizes:

— Small body type for 3/4 in. (19 mm), 1 in. (25 mm),

1-1/4 in. (32 mm), 1-1/2 in. (38 mm) and 2 in. (51

mm) pipes.

— Large body type for 2 in., 2-1/2 in. and 3 in. pipes.

• Seven pipe adapter sizes (3/4 in. to 3 in.) have

NPT or BSP-PL threaded connections.

• V5097 version provides three 1/4 in. upstream

and two 1/4 in. downstream taps and plugs.

European Community (CE) version provides an

additional downstream tap and plug.

• Valve body rating of 75 psi (517.1 kPa); body

passes Underwriters Laboratories Inc. burst test.

• Yellow SHUT indicator attached to valve stem

indicates valve closed position.

• Unpainted die-cast aluminum body.

APPLICATION

The V5097A-E Gas Valves are used with the V4055, V4062

and V9055 Fluid Power Actuators to control gas flow to

commercial and industrial burners.

SPECIFICATIONS

IMPORTANT

The specifications given in this publication do not

include normal manufacturing tolerances; therefore,

an individual unit may not exactly match the listed

specifications. Also, this product is tested and

calibrated under closely controlled conditions, and

some minor differences in performance can be

expected if those conditions are changed.

Models (See Table 1):

Type of Gas: Natural or liquefied petroleum (LP) only.

Pipe Size: 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in., 2-1/2 in., 3 in.

Pipe Threads: NPT or BSP-PL threads (equivalent to ISO R7

and DIN 2999). 3/4 in. to 3 in. pipe adapters available.

Pressure Ratings: See Table 2.

(V5097A1020, V5097A1038,

V5097B1028, V5097B1036 ONLY)

Summary of content (4 pages)

PAGE 1
V5097A-E Industrial Gas Valves SPECIFICATION DATA — — Small body type for 3/4 in. (19 mm), 1 in. (25 mm), 1-1/4 in. (32 mm), 1-1/2 in. (38 mm) and 2 in. (51 mm) pipes. Large body type for 2 in., 2-1/2 in. and 3 in. pipes. • Seven pipe adapter sizes (3/4 in. to 3 in.) have NPT or BSP-PL threaded connections. • V5097 version provides three 1/4 in. upstream and two 1/4 in. downstream taps and plugs. European Community (CE) version provides an additional downstream tap and plug.
PAGE 2
V5097A-E INDUSTRIAL GAS VALVES Valve Body Rating: 75 psi (517.1 kPa), passes Underwriters Laboratories Inc. burst test. Bolt/Nut Fasteners: V5097A1004, V5097B10021, V5097C1000, V5097D1008, V5097E1005: 3/8-16 x 1.375 in., Grade 5 bolt. Metric Equivalent: M8 x 1.25 x 35 mm, Class 9.8. V5097A1012, V5097B1010, V5097C1008, V5097D1016, V5097E1013: 1/2-13 x 2.00 in., Grade 5 bolt. Metric Equivalent: M12 x 1.75 x 50 mm, Class 9.8. Valve Capacities: IAS ratings at 1 in. (0.
PAGE 3
V5097A-E INDUSTRIAL GAS VALVES Replacement Bonnet Assembly (see Product Data sheet, form 60-0230.): Includes complete bonnet assembly, plus the required replacement seal assembly. Approvals: The following combination of V5097 Valves (3/4 in. through 3 in.) and V4055, V4062 and V9055 Fluid Power Actuators are approved or found acceptable by these agencies: Underwriters Laboratories Inc. Listed: File No. MH1639, Guide No. YIOZ: V4055A,B,D,E/V5097A,B,C,D,E. V4062/V5097A,B,C,E. V9055/V5097A,B,C,E.
PAGE 4
V5097A-E INDUSTRIAL GAS VALVES 5 (127) 6-3/4 (171) 1-9/32 (33) 1 A C B H G E OCTAGON D J F 1 ALLOW 2 IN. (51 MM) CLEARANCE FOR ACTUATOR REMOVAL. VALVE SIZE (IN.) DIM. A DIM. B DIM. C DIM. D DIM. E DIM. F DIM. G DIM. H IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. IN.