MICRO SWITCH™ Premium Miniature Basic Switches V7 Series Datasheet
MICRO SWITCH™ V7 Series Premium Miniature Basic Switches Honeywell’s MICRO SWITCH™ V7 miniature switches are designed for long term-reliability in a rugged switch packaged with a thermoplastic housing. These switches may be installed in a wide range of applications from simple or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies.
Features and Benefits ACTUATION ON TIME MICRO SWITCH™ V7 Series basic switches operate with forces as low as 15 g and carry options to increase to 397 g, and can thereby easily accommodate different actuator mechanisms. Global acceptance: UL, CSA, ENEC RELIABLE PERFORMANCE IN HARSH CONDITIONS Switches feature industry-leading temperature ranges of -40 °C to 175 °C [-40 °F to 347 °F] to allow for years of reliable performance in harsh conditions.
V7 Series PRODUCT NOMENCLATURE V7 — Operating Force Switch TypeA V7 Series Miniature 1 1N 4 1 1 7 D8 Circuitry Code Mounting/ ConstructionD,F Termination Style C Electrical RatingC,F North Europe America (ENEC) (Inches) — — Lever StyleB Special Designator 150 g max. A 5A@ 125 Vac 3A 1 SPDT 3 150 °C 2,9 mm [0.11 in] mtg. holes D8 0.187 x 0.02 quick connect 002 175 g max. B 11 A @ 125 Vac 10 A 2 SPNO 4 150 °C 3,1 mm [0.12 in] mtg. holes E8 0.187 x 0.
MICRO SWITCH™ Premium Miniature Basic Switches Table 1. Specifications Characteristic Parameter Circuitry SPDT, SPNC, SPNO Operating force 0,25 N to 3,9 N [15 g to 397 g] Termination quick connect; 4,75 mm x 0,51 mm [0.187 in x 0.02 in] quick connect: 6,35 mm x 0,81 mm [0.25 in x 0.
V7 Series O.F. • R.F. • P.T. • O.T. • D.T. • O.P. • PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings Catalog Listing Pin plunger Elect. Rating UL/CSA (CE) Elect. Rating Spec. Contacts O.F. max. newtons [grams] O.P. nominal mm [inches] P.T. max. mm [inches] O.T. min. mm [inches] D.T. mm [inches] (page 4) V7-2S17DB 0.1 A (---) S SPDT 0,79 [75] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1S17D8 0.
MICRO SWITCH™ Premium Miniature Basic Switches PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings Catalog Listing Lever 35,6 mm [1.40 in] Lever 59,4 mm [2.34 in] Lever Sim. Roll 32,8 mm [1.29 in] Lever, Roller 20,57 mm [0.81 in] Lever, Roller 34,04 mm [1.34 in] Elect. Rating UL/CSA (CE) Elect. Rating Spec. O.F. • R.F. • P.T. • O.T. • D.T. • O.P.
V7 Series AVAILABLE TERMINALS Quick Connect (QC) Printed Circuit Board (PO2) D8 Terminals: 0.187 in wide x 0.020 in thick. E8 Terminals: 0.187 in wide x 0.020 in thick. These terminals interface with snap-on receptacles and other components from AMPMODU interconnection system. E9 Terminals: 0.250 in wide x 0.032 in thick. STANDARD ACTUATOR OPTIONS 10,2 0.40 Roller Lever (-201) Straight Lever (-022) Roller Lever (-207) Straight Lever (-048) Simulated Roller Lever (-263) 6,4 0.25 20,2 0.80 2,8 0.
ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: • Product installation instructions • Product range guide • Product nomenclature tree WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury.