Submittal Sheet

ManualsBrandsHoneywell ManualsCombustion Solenoid Valves3/8" NPT Solenoid Pilot Gas Valve (24V)

Table Of Contents

SPECIFICATION DATA

65-0068-1

® U.S. Registered Trademark

V4046C, V8046C

Magnetic Valves

APPLICATION

The V4046C and V8046C Magnetic (solenoid) Valves provide

On-Off control of natural or LP gas flow for pilot burners in

commercial and industrial applications.

FEATURES

• Normally closed valves which open immediately when

energized.

• V4046C is for line voltage applications; V8046C is for

24 Vac applications.

• Provides on-off control of manufactured, Liquefied

Petroleum (LP), and natural gases with high sulfur

content.

• Used with pilot burners in industrial applications.

• All models close in one second (maximum) on power

failure.

• Heavily loaded spring plunger maintains valve seating

when the coil is de-energized, permitting the valve to

be mounted in any position.

• Valve may be pipe-mounted or mounted on bracket

support furnished by the installer.

• Powerhead assembly can be rotated 360 angular

degrees.

• Solenoid coil is field-replaceable without removing the

valve body from the piping connection.

SPECIFICATIONS

Models: See Table 1.

Types of Gas: Suitable for all domestic gases including high

sulfur content LP gas.

Valve Material: Aluminum.

Valve Pattern: Straight-through.

Pipe Size: See Fig. 1.

Dimensions: See Fig. 2.

Valve Action on Power Failure: All models close in one

second maximum.

Mounting:

Can be mounted in any position. Mounts directly in pipe line or

on a support bracket. See Fig. 2 for tapped holes provided

in bottom of valve body. Conduit outlet on powerhead can

be rotated through 360 degrees with respect to valve body.

Wiring Connection: Two 36-in. (915 mm) leadwires; 1/2 in.

conduit bushing.

Ambient Temperature Range: -40°F to +125°F (-40°C to

+54°C).

Approvals:

Underwriters Laboratories, Inc. Listed: File NO. MH1639, V3,

S3; Guide No. YIOZ; V4046C, V8046C for gas.

Factory Mutual Listed: V4046C, V8046C for gas.

CSA 158158-250000605.8, Guide Numbers C3371-03, 83.

(60 Hz models only).

Summary of content (4 pages)

PAGE 1
V4046C, V8046C Magnetic Valves SPECIFICATION DATA FEATURES • Normally closed valves which open immediately when energized. • V4046C is for line voltage applications; V8046C is for 24 Vac applications. • Provides on-off control of manufactured, Liquefied Petroleum (LP), and natural gases with high sulfur content. • Used with pilot burners in industrial applications. • All models close in one second (maximum) on power failure.
PAGE 2
V4046C, V8046C MAGNETIC VALVES Replacement Parts: Coil assemblies include coil, leadwire, insulator and bobbin. See Table 3. Table 1. Model Specifications. Pressure Ratinga Model V4046C V8046C Pipe Size (in.) 1/8 Thread 1/8 - 27 NPT psi 10 kPa 69 Gas Flow cfhb m/hr Gas Heat Capacitya btuhc Operation Energized Opens Immediately Voltages (60 Hz) 20 0.57 20,000 1/4 Small Body 1/4 - 18 NPT 20 0.57 20,000 120 1/4 Large Body 1/4 - 18 NPT 55 1.56 55.000 120 3/8 3/8 - 18 NPT 67 1.
PAGE 3
V4046C, V8046C MAGNETIC VALVES 6.0 1/4 INCH LARGE 5.0 1/8 INCH 4.0 1/4 INCH SMALL 3/8 INCH 3.0 2.5 2.0 1.5 PRESSURE 1.0 DROP (P SI) .9 .8 1 .7 .6 .5 .4 .3 .25 .2 .15 .1 30 40 50 60 70 80 90 100 150 200 250 300 400 500 600 700 800 900 1000 1500 FLO W (CFH ) OF NAT UR AL GA S SP . G R . .64 1 TO CONVERT PRESSURE DROP IN INCHES WC TO PSI UNITS, MULTIPLY UNITS IN INCHES WC By .0361. TO CONVERT PRESSURE DROP FROM PSI TO INCHES WC, MULTIPLY UNITS IN PSI BY 27.7. M20743B Fig. 1.
PAGE 4
V4046C, V8046C MAGNETIC VALVES Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 65-0068—1 Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Scarborough, Ontario M1V 4Z9 G.R. Rev. 09-02 Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. www.honeywell.