Product Overview

ManualsBrandsHoneywell ManualsDampers1/2" VB6 Series, 6-Way Control Ball Valve and Modulating Actuator (1.2/7.4 Cv)

The VB6 series 6-Way valve is an

electronically actuated characterized

control ball valve. The VB6 series 6-Way

control ball valve is combined with a

non fail-safe modulating (proportional)

actuator. This combination allows

for control of heating, cooling and

complete shut-off of both sequences.

VB6 SERIES

6-way Control Ball Valves and Actuators

FEATURES AND BENEFITS

Very wide range of

CV options from

0.3 to 7.4 for both

control sequences for

perfect valve sizing

and ﬂow control.

Actuator comes with

removable access

cover to provide direct

access to terminal

blocks for wiring.

Actuator’s declutch

function for manual

adjustment to provide

easy installation. .

Zero internal leakage –

Energy savings due to

prevention of energy

waste caused by leakage

Control ball valves

feature self-cleaning

technology which helps

to eliminate blockage

and leakage caused by

damaged surfaces.

Valve body comes

with Nickel plated

brass body to reduce

stress concentration

on the valve body.

Stainless steel trim -

VB6 valves come with

stainless steel balls and

stems for maximum

performance and life.

https://hwll.co/6xbts

APPLICATION

Ideal for chilled beam units, fan

coil units, small air handling coils,

bypass piping, and other applications

featuring a single heat exchanger

in four-pipe systems to control

chilled or hot water in closed loop

systems with up to 60% glycol.

EFFICIENT DESIGN

Reduces wiring and eliminates

need of a change over valve,

while enabling the use of a single

coil for heating and cooling.

ALL-IN-ONE

VB6 ball valves are designed to serve

as both change-over valves and

control valves in one, using only one

modulating actuator to achieve both

functions, connecting a single 2-pipe

heat exchanger to 4-pipe systems.

The simultaneous rotation of two

balls, mechanically connected to

one stem, opens supply and return

ports on one control sequence (e.g.

cooling), while keeping the second

sequence closed (heating). This

control scheme avoids mixing between

ﬂows and cannot be overridden.

RELIABLE CONTROL

VB6 valves are designed to be

actuated by MN7510 rotary actuators.

Modulating mode enables ﬂow control

in both sequences and setting the

valve in mid position to close both

sequences. Position feedback on

modulating actuator is available

and may be used for remote system

monitoring and system check. Actuator

facilitated with function selection

switch for four different modulating

modes, ﬂoating, or 2-position control.

FLOW ON DEMAND

The valve’s equal percentage ﬂow

characteristic provides linear

thermal output based on the valve’s

opening angle, as controlled by

the actuator’s input signal.

ONLINE DOCUMENTATION

Scan below QR code or visit the

link for complete documentation

for the VB6 valves.

Summary of content (5 pages)

PAGE 1
VB6 SERIES 6-way Control Ball Valves and Actuators The VB6 series 6-Way valve is an electronically actuated characterized control ball valve. The VB6 series 6-Way control ball valve is combined with a non fail-safe modulating (proportional) actuator. This combination allows for control of heating, cooling and complete shut-off of both sequences.
PAGE 2
TECHNICAL SPECIFICATIONS CALIFORNIA PROPOSITION 65 WARNING This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. VALVE SPECIFICATIONS CONSTRUCTION PARAMETER SPECIFICATIONS Sizes 1/2" Valve connection Female NPT CV range 0.3 to 7.
PAGE 3
MEASUREMENTS AND DIMENSIONS VB6 SERIES 6-WAY CONTROL BALL VALVE VALVE NOMINAL SIZE A B C D E F VALVE BODY INCH IN (MM) IN (MM) IN (MM) IN (MM) IN (MM) IN (MM) VB6A 1/2" 6.85 (174) 2.76 (70) 6.63 (168) 5.33 (135) 4.14 (105) 3.77(95) MODEL SELECTION (PART NOMENCLATURE) VB6 SERIES 6-WAY CONTROL BALL VALVES VALVE SERIES SIZE VB6 A (1/2 inch) VB6 A SEQUENCE 1 SEQUENCE 2 CV VALUE CV VALUE 003 CV 0.30 003 CV 0.30 004 CV 0.46 004 CV 0.46 008 CV 0.80 008 CV 0.
PAGE 4
MN7510 SERIES ACTUATOR • This non-spring return direct-coupled actuator provides modulating, floating, or 2-position control with torque of 88 lb.-in. (10 Nm). • Actuator facilitated with function selection switch for four different modulating modes, floating, or 2-position control. • Declutch for manual adjustment. • Removable access cover for direct wiring. • Function selection switch for selecting modulating, floating, or 2-position control. • Models available with 3 foot 18 AWG color-coded cable.
PAGE 5
MEASUREMENTS AND DIMENSIONS MN7510 SERIES ACTUATORS For more information https://www.cpq.honeywell.com/eCommerce#/ Honeywell Building Technologies 715 Peachtree Street NE Atlanta, GA 30308 United States of America. www.honeywell.com By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or modification to, the literature.