Submittal Sheet

ManualsBrandsHoneywell ManualsDampers1/2" 2 Way Brass Threaded Control Ball Valve for DCA Actuator (2 Cv)

PRODUCT DATA

63-2648-07

VBN Threaded Control Ball Valves

and Actuators

APPLICATION

The VBN2 2-Way Control Ball Valves and VBN3 3-Way

Control Ball Valves control hot and chilled water with

glycol solutions up to 50% in heating, ventilating, and air

conditioning (HVAC) systems to provide two-position or

modulating functions. These control ball valves can be

ordered alone or with spring return or non-spring return

actuators.

VBN2, VBN3

FEATURES

• Sizes from 1/2 to 3 in. with internal (female) NPT

connections.

• Equal percentage flow characteristic.

• Reduced B port CV for constant loop flow.

• Choice of factory-installed actuation: floating,

modulating (2-10 V), spring return or non-spring

return 2-Position, Spring Return

Modulating/Floating, Spring Return Sylk-enabled.

• Field configurable for normally open or normally

closed fail-safe position.

• Removable manual operating handle to control valve

during installation or in an event of power failure.

• Actuator can be mounted on the valve in any of four

orientations.

• Field-serviceable stem assembly.

• Wide range of CV choices from 0.33 to 266.

• Nickel-chrome plated brass or 316 stainless steel

ball and stem.

• Valve installs in a globe valve “T” pattern, no extra

elbows or piping required.

• Mixing or Diverting control for 3-way valves.

• ANSI Class IV seat leakage specification (0.01% of

CV) for 3-way A port and ANSI Class III seat leakage

specification (0.1% of CV) for 3-way B port.

Contents

VBN2, VBN3 .................................................................................. 1

MVN Actuator ............................................................................... 7

Non-Spring Return Direct Coupled Actuator .................. 8

Spring Return 3 Nm Diamond ............................................... 9

Spring Return Direct Coupled Actuator ............................. 10

Installation .................................................................................... 18

Operation and Checkout .......................................................... 25

Summary of content (28 pages)

PAGE 1
VBN Threaded Control Ball Valves and Actuators PRODUCT DATA APPLICATION FEATURES The VBN2 2-Way Control Ball Valves and VBN3 3-Way Control Ball Valves control hot and chilled water with glycol solutions up to 50% in heating, ventilating, and air conditioning (HVAC) systems to provide two-position or modulating functions. These control ball valves can be ordered alone or with spring return or non-spring return actuators. • Sizes from 1/2 to 3 in. with internal (female) NPT connections.
PAGE 2
VBN THREADED CONTROL BALL VALVES AND ACTUATORS SPECIFICATIONS 3-way ball valve, A-B-AB flow, full or reduced port using patented flow control insert. Internal NPT connections. Valve Type: Control Ball Valve Body Pattern: 2-way, 3-way Connection Type: Female NPT Body Pressure Rating (maximum): 360 psi (2482 kPa) at 250°F (121°C). Controlled Fluid: Chilled or hot water with up to 50% Glycol. Not for use with steam or fuels. Leakage Rating: ANSI Class IV (0.
PAGE 3
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Table 1. VBN Model Selection Table.
PAGE 4
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Table 2. Actuator Control Description. Actuator MVN613A0000 Control Floating, Two-position (SPDT) (90 sec. timing), 24 V, Fail in Place MVN613L0000 MVN643A0000 Floating, Two-position (SPDT or SPST) Fast Acting (30 sec.
PAGE 5
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Table 3. Control Ball Valve Short Order Codes ½” – 3”. Actuator Adapter Trim CV Valve Size Body Flow Type Valve Model Selection: Ball Valve VBN - Control Ball Valve Actuator 0 - No Actuator (valve only) 2 - 2-way 3 - 3-way 1 - 24 Vac, Floating/2-Pos., 90 sec. (MVN613, Fail in place)*** Fail Position 0 - No Actuator or Fail in Place (FIP) Accessories 00 - None 00 - None 01 - C1 - 1 m Cable 2 - 24 Vac, Floating/2-Pos., 30 sec.
PAGE 6
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Table 4. Cv Designator for Two-Way VBN Ball Valves. Valve Body E F G H J VBN2A 1/2” Size 0.38 0.68 1.3 B D 2.0 2.6 4.7 8.0 11.7* VBN2B 3/4” 0.31 0.63 1.2 2.5 10.1 4.3 7.4 VBN2C 1” 4.4 9.0 VBN2D 1-1/4” 4.4 8.3 K L 14.9 N P 44* 54* R S T 26 25 37 41* 23 30 41 42 57 71 100 108* 45 55 72 101 VBN2H 3” 49 63 82 N P 124 145* Table 5. Cv Designator for Three-Way VBN Ball Valves. VBN3A 1/2” C 0.33 0.
PAGE 7
VBN THREADED CONTROL BALL VALVES AND ACTUATORS SPECIFICATIONS MVN Actuator Actuator Type: Valve Rotational Stroke: 90° ±3°. Fail Safe Mode: Non-spring return, Fail in place Torque: 27 lb-in. (3 Nm). External Auxiliary Switches Available: No Supply Voltage: 24 Vac +20%, -15%, 24 Vdc Power Consumption: 5 VA- Modulating; 1.
PAGE 8
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Non-Spring Return Direct Coupled Actuator Frequency: 50 Hz; 60 Hz Manual operation: Declutch mechanism Mounting: Direct coupled Maximum Noise Rating, Driving (dBA @ 1m): 35 Rotation to Open: By switch Rotational Stroke Adjustment: Dual Integral Adj. Stops (3 degree increments) Compatible Damper Shafts: 1/4 to 1/2 in. square or 3/8 to 5/8 in.
PAGE 9
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Spring Return 3 Nm Diamond Cable Specification: Power Cable: Plenum Rated, 3 ft (0.914 m) length from end of access cover, 18 AWG Switch Cable: Appliance Rated, 3 ft (0.
PAGE 10
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Spring Return Direct Coupled Actuator Spring Return Direction: By orientation External Auxiliary Switches Available: No Environmental Rating: NEMA2 Frequency: 50 Hz; 60 Hz Mounting: Direct Coupled Maximum Noise Rating, Holding (dBA @ 1m): 20 (no audible noise) Maximum Noise Rating, Driving (dBA @ 1m): 50 Rotation to Open: By switch Supply Voltage: 24 Vac +20%, -15%, 24 Vdc Power Consumption: 5 VA Rotational Stroke Adjustment: Mechanically limited 5 degree inc
PAGE 11
VBN THREADED CONTROL BALL VALVES AND ACTUATORS F B E D A C M34950 Fig. 5. 2-way ball valve dimensions for models with MN and MS actuators. See Table 7. F B D E G A C M34951 Fig. 6. 3-way ball valve dimensions for models with MN and MS actuators. See Table 8. I I CLEARANCE ABOVE ACTUATOR 3/4 (19) CLEARANCE ABOVE ACTUATOR 3/4 (19) L L J J K K A H L STANDARD BASE = 3-7/8 (98) L LOW PROFILE = 3-1/4 (82) MVN WITH 2-WAY BALL VALVE A H MVN WITH 3-WAY BALL VALVE M34952 Fig. 7.
PAGE 12
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Table 7. VBN2 dimensions in inches (millimeters). MVN, MN, AND MS ACTUATORS WITH 2-WAY BALL VALVE Dimensions in in. (mm) Pipe Size In. (DN) Code CV Designators A B C D Fmsa E Fmnb H I J J (w/std) (w/low) K Weight (valve Replacement Stem only) lbs. Assembly** 1/2 15 VBN2A 0.38, 0.68, 1.30, 2-3/8 2.00, 2.60, 4.70, (60) 8.00, 11.
PAGE 13
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Table 8. VBN3 dimensions in inches (millimeters). MVN, MN, AND MS ACTUATORS WITH 3-WAY BALL VALVE Dimensions in in. (mm) D E Fmsa 3 4 9-3/8 (76) (102) (238) 3 4 8-13/16 (76) (102) (224) Fmnb 8-1/8 (206) 7-9/16 (192) Weight (valve Replacement only) Stem J J lbs. Assembly G H I (w/ std) (w/ low) K 2-3/8 426-11/16 6-1/16 2-7/8 2.
PAGE 14
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Effective CV Table 11. Effective CVs Using Pipe Reducers (Three-way) Effective CVa Valve Pipe Size (NPT) Size (in.) 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" For effective CVs for Honeywell control ball valves when used with pipe reducers, refer to Table 10 and 11. Table 10. Effective CVs Using Pipe Reducers (Two-way). Effective CVa Valve Pipe Size (NPT) Size (in.) 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 1/2" 3/4" 1" 0.38 0.38 0.38 0.68 0.68 0.68 1.3 1.
PAGE 15
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Application Notes 100% IMPORTANT Valve sizing is important for correct system operation. Undersized valves do not have sufficient capacity at maximum load. Oversized valves do not have sufficient authority over the load in modulating applications. 80% FULL PORT FLOW 60% Oversized valves can cause excessive cycling and the seat and ball can be damaged because of the restricted opening.
PAGE 16
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Cavitation Limits Ball Valve To prevent cavitation (the formation and collapse of steam bubbles), a conservative rule-of-thumb is to limit the pressure drop across the control valve to: Valve housing shall consist of forged brass rated at no less than 360 psi at 250°F. Standard valve ball shall consist of chemically nickel-plated brass. Manufacturer shall be able to provide optional 316 stainless steel ball and stem for 2way valves.
PAGE 17
VBN THREADED CONTROL BALL VALVES AND ACTUATORS Table 13. Actuator Accessories and Replacement Parts.
PAGE 18
VBN THREADED CONTROL BALL VALVES AND ACTUATORS INSTALLATION When installing this product... 1. 2. 3. 4. Refer to actuator literature for actuator dimensions. 1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition. Check ratings given in instructions and on the product to ensure the product is suitable for your application. Installer must be a trained, experienced service technician.
PAGE 19
VBN THREADED CONTROL BALL VALVES AND ACTUATORS FLOW FLOW 2-WAY; OPEN 3-WAY; A-AB OPEN 2-WAY; CLOSED 3-WAY; B-AB OPEN M34954 NOTES: FOR 2-WAY VALVES TO MOUNT ACTUATOR ON OPEN VALVE, TURN ACTUATOR FULLY COUNTER CLOCKWISE AS SHOWN. FOR 2-WAY VALVES TO MOUNT ACTUATOR ON CLOSED VALVE, TURN ACTUATOR FULLY CLOCKWISE AS SHOWN. Fig. 14. Vertical valve installation. FOR 3-WAY VALVES TO MOUNT ACTUATOR ON A-AB VALVE, TURN ACTUATOR FULLY COUNTER CLOCKWISE AS SHOWN.
PAGE 20
VBN THREADED CONTROL BALL VALVES AND ACTUATORS NOTE: Take note of the screw hole positions on the valve. They limit the mounting plate positions. 7. 8. 9. 10. FLOATING ACTUATOR Lower ring down to valve body and engage it in the new position relative to the mounting plate. Tighten screws to valve body securing the mounting plate. Reattach the stem assembly to the mounting plate. If desired, replace the handle on the shaft. Direct Service/Off Reverse NOTE: See Fig. 13 for valve exploded view.
PAGE 21
VBN THREADED CONTROL BALL VALVES AND ACTUATORS FLOATING ACTUATOR END SWITCHES (CLASS II-ONLY) 5° 1 BLACK 85° 24 VAC WHITE BROWN SPST S1 S3 S2 S5 2 S6 M25214A 1 PROPORTIONAL/MODULATING: 4-20mA CONTROLLER OUTPUT WITH 500Ω SERIES RESISTOR 1 2 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. Fig. 23. MVN643 with Two Position SPST Control. BLACK WHITE 4 M33557C Fig. 20. Wiring for MN6105 and MN7505 models with aux./end switches.
PAGE 22
VBN THREADED CONTROL BALL VALVES AND ACTUATORS PROPORTIONAL/MODULATING: 0(2)...10 VDC OR 10...0(2) VDC CONTROLLER OUTPUT CLASS 2 PROPORTIONAL ACTUATOR DIP SWITCH POSITION 1 2 MODE OFF OFF 2-10V OFF ON 0-10V ON OFF 10-2V ON ON 10-0V 1 BLACK 1 RED 2 V 2 BLACK 3 WHITE 0/2 TO 10 VDC PROPORTIONING CONTROLLER 1 2 RED ACTUATOR 24 VAC 0°-90°/MODULATING 4 BROWN 90°-0°/FEEDBACK – 24 VAC 2-10 VDC 10-2 VDC 0-10 VDC 10-0 VDC + WHITE + FLOATING, FWD FLOATING, REV – + 1 LINE VOLTAGE POWER SUPPLY.
PAGE 23
VBN THREADED CONTROL BALL VALVES AND ACTUATORS ACTUATOR CLASS 2 1 24 VAC 1 RED 2 2 BLACK 3 WHITE 0/2 TO 10 VDC PROPORTIONING CONTROLLER V 1 24 VAC 1 SPST 2 V 3 2 0°-90°/MODULATING 4 BROWN 90°-0°/FEEDBACK ACTUATOR – + 3 FEEDBACK 2-10 VDC 10-2 VDC 0-10 VDC 10-0 VDC 1 LINE VOLTAGE POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. 2 24 VDC SUPPLY ACCEPTABLE.
PAGE 24
VBN THREADED CONTROL BALL VALVES AND ACTUATORS ACTUATOR 1 24 VAC 1 1 1 V 2 SPST V 2 2 3 0/2 TO 10 VDC PROPORTIONING CONTROLLER OR + 4 OR N/A 5 FEEDBACK ACTUATOR – 2-10 VDC 10-2 VDC 0-10 VDC 10-0 VDC Fltg, fwd Fltg, rev + SPST 3 FEEDBACK 1 LINE VOLTAGE POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. M29122 Fig. 38. MS4105 with 120 Vac Two Position SPDT control. 1 LINE VOLTAGE POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.
PAGE 25
VBN THREADED CONTROL BALL VALVES AND ACTUATORS 3. CLASS 2 24 VAC ACTUATOR RED 4. BLACK CONTROLLER HOT COM S-BUS S-BUS 1 LINE VOLTAGE POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. 2 24 VDC SUPPLY ACCEPTABLE. BROWN S-BUS BROWN S-BUS ADDRESS 11 ADDRESS 12 ADDRESS 13 ADDRESS 14 ADDRESS 15 TEST 3 ADDRESS SELECTOR Fig. 41. MS3103 with Sylk Bus control.
PAGE 26
VBN THREADED CONTROL BALL VALVES AND ACTUATORS 63-2648—07 26
PAGE 27
VBN THREADED CONTROL BALL VALVES AND ACTUATORS 27 63-2648—07
PAGE 28
VBN THREADED CONTROL BALL VALVES AND ACTUATORS By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any liability, cost, or damages, including attorneys’ fees, arising out of, or resulting from, any modification to the literature by you. Honeywell Building Technologies In the U.S.