User Manual

www.honeywellaidc.com | Thor VM1 & VM2 Accessory Catalog
14
RAM Mount Kit for
external keyboard - Clamp base, short arm
SKU: VM2014BRKTKIT
RAM mount kit, clamp base D ball 2.25 inch (57mm), short D arm 5 inch (128mm), D
ball for vehicle dock rear. Keyboard mount: dock plate, C ball 1.5 inch (32mm), for dock
plate, C arm 5.7” (145mm), keyboard RAM mount plate with C ball.
Note:
1. Kit includes a at clamp type RAM ball for the vehicle side mounting. The clamp base
attaches directly to the overhead guard or the overhead guard support posts of most
fork lift vehicles without the need for additional mounting hardware. Drilling holes is
not required.
RAM Mount Kit for
external keyboard - Clamp base, medium arm
SKU: VM2015BRKTKIT
RAM mount kit, clamp base D ball 2.25 inch (57mm), medium D arm 8.5 inch (215mm),
D ball for vehicle dock rear. Keyboard mount: dock plate,
C ball 1.5 inch (32mm), for dock plate, C arm 5.7” (145mm), keyboard RAM mount plate
with C ball.
Note:
1. Kit includes a at clamp type RAM ball for the vehicle side mounting. The clamp base
attaches directly to the overhead guard or the overhead guard support posts of most
fork lift vehicles without the need for additional mounting hardware. Drilling holes is
not required.
RAM Mount Kit for
external keyboard - Clamp base, long arm
SKU: VM2016BRKTKIT
RAM mount kit, clamp base D ball 2.25 inch (57mm), long D arm 13 inch (330mm), D
ball for vehicle dock rear. Keyboard mount: dock plate,
C ball 1.5 inch (32mm), for dock plate, C arm 5.7” (145mm), keyboard RAM mount plate
with C ball.
Note:
1. Kit includes a at clamp type RAM ball for the vehicle side mounting. The clamp base
attaches directly to the overhead guard or the overhead guard support posts of most
fork lift vehicles without the need for additional mounting hardware. Drilling holes is
not required.
VM2014BRKTKIT VM2015BRKTKIT VM2016BRKTKIT
Mounting