TrueFRESH Installation Manual

TrueFRESH™ ERV/HRV Ventilation Systems 69-2480EF—17 19
Installation Steps (continued)
3b
Mounting the VNT5070
1. Fix the control module bracket to the top of the
 VNT5070usingthesuppliedmountingscrews.
2. Slide the control module onto the bracket
using the key holes.
NOTE: When these mounting steps are complete, resume normal installation procedures beginning on
page 20, “Installing the flex duct to the ERV/HRV.”
3. Fix the wall mount bracket to two 2x4s or to
a precut sheet of plywood using the supplied
mounting screws.
4. Hang the unit on the bracket.
5. Secure with two sheet metal screws.