Submittal Sheet
SPECIFICATIONS
The specications following are nominal and conform to generally
accepted industry standards. Honeywell is not responsible for
damages resulting from misapplication or misuse of its products or
non-workmanlike installation practices.
Operating Ambient:
32 to 150°F [0 to +65°C].
5-95% RH (non-condensing)
Fluid temperatures:
34 to 203°F [1 to 95°C]
Shipping and Storage Temperature:
-40 to 150°F [-40 to +65°C]
Atmosphere:
Non-corrosive, non-explosive.
Valve Materials:
Body of bronze Cartridge of Ryton (polyphenylene sulphide)
and Noryl (polyphenylene oxide)
O-ring seals of EPDM rubber
Stem of stainless steel
Pressure Rating:
Static - 300 psig [20 Bar] maximum.
Burst - 1500 psig [100 Bar]
Operating Differential and Close-off - 60 psi maximum [4 bar]
Stem Travel:
0.4 inches [10 mm]
Flow Characteristics: Linear or equal percentage, per Table 2.
Spring Force:
1000 and 6000 Series(Silver): 14 lbf.
3000 and 7000 Series(Red): 20 lbf.
Form No. 95C-10948
VCZA,B,M,N Series
Cartridge Valve for Use with VC Series
Figure 1 - Nominal dimensions in inches [millimetres]
Table 1: VC Valve assembled dimensions
2007.05 Printed in Canada
A
B
B
AB
A
94 [3-3/4]
D
90 [3-9/16]
C
94 [3-3/4]
C
68 [2-3/4]
E
The VC hydronic valve consists of a valve body and replaceable
characterized cartridge assembly.
Depending on the valve model selected, they can be used with a
VC2114 or VC8114 series actuator to provide on-off ow control, or
with a VC6930 or VC7930 series actuator to provide proportional ow
control. Two way bodies may be plumbed in either direction. Three-way
bodies may be used in either diverting or mixing applications.
Replacing the cartridge rebuilds the valve. The valve body should be
able to stay in the pipes indenitely.
VC actuators, ordered separately, use cam-operated cartridge travel to
resist water hammer. Limit switches prevent motor overrun.
[1] Dimensio
n
Pipe Fitting Sizes mm Inches mm Inches mm Inches
1/2" SWEAT 89
3-1/2 130 5-1/8
1/2" NPT (int.)
98 3-7/8 136 5-11/32
3/4" NPT (int.)
130
5-1/8
3/4" SWEAT 132 5-3/16
1" NPT (int.)
1" SWEAT 5-11/32
1-1/4" SWEAT
1-1/4" NPT (int.)
[1] All models not available in all countries
111 4-3/8
142 5-5/8
113 4-7/16
136
118
EC D
110 4-5/16 4-5/8
3-11/1694