Video Recorder User Manual

Setpoint Profiler
Video Recorder – User Manual 201
How to load a program from disk
Table 5-12 Procedure To Load A Program From Disk
Step Action Result/Notes
1 Press the Display button to change to online
mode.
An online display is shown.
2 Press the Menu button to display the online
menu.
Online menu is displayed.
3 Press Decrement button to highlight Setpoint
Profiles.
Cursor moves down.
4 Press Enter. Setpoint Profiles menu is displayed.
5 Press Decrement button to highlight Load
Program From Disk.
Prompt is highlighted.
6 Press Enter. Load Program sub-menu is displayed.
7 Press Increment or Decrement to highlight
desired program file.
Program is highlighted.
8 Press Enter to select. Press Enter again to
load.
Program is loaded from the disk to the instrument.