Operator's Manual

69-1353 20
Programming Dial-Out Telephone Number Settings
The Telephone Access Module stores up to three dial-
out telephone numbers. Each telephone number can be
a maximum of 25 di
g
its in len
g
th. See Table 4.
•
Telephone number settin
g
one: The homeowner
selects a number where the
y
can be contacted when
awa
y
from home (such as office, second home, or
cellular phone number).
•
Telephone number settin
g
two: An alternate contact
when the homeowner cannot be reached (such as
relative, friend or nei
g
hbor).
•
Telephone number settin
g
three (HVAC contractor is
providin
g
monitorin
g
service at homeowner’s
request): The HVAC contractor phone number.
IMPORTANT
If these numbers are not programmed, a dial-
out is not initiated on alert.
After
y
ou enter the confi
g
uration number 9,
y
ou will
hear:
• “Telephone Number Settin
g
Menu.”
•“To chan
g
e telephone number one, press 1.”
•“To chan
g
e telephone number two, press 2.”
•“To chan
g
e telephone number one, press 3.”
•“To return to the confi
g
uration menu, press the
* ke
y
”.”
As an example, follow the process to chan
g
e telephone
number 1:
1.
Press 1.
2.
You will hear, “Telephone number one is not pro-
g
rammed, enter the telephone number followed
b
y
the # ke
y
.”
3.
Enter the telephone number
y
ou wish to desi
g
-
nate the Telephone Access Module to dial-out on
an alert condition for telephone settin
g
number
one.
4.
Press the # ke
y
.
5.
You will hear, “For Voice, press 1; for Data, press
2.”
The Telephone Access module has the built-in capabilit
y
to send data; this is considered a future application. Do
not select option 2. Please fill out and mail
y
our
Re
g
istration Card so
y
ou are re
g
istered to receive
information on this and other future capabilities and
enhancements.
IMPORTANT:
Do not select option 2. You will not receive the
alerts in a voice format so you cannot respond
immediately to an alert.
6.
Press 1.
7.
You will hear, “The alert settin
g
is voice.” “Tel e-
phone number one is (telephone number
y
ou
entered).
8.
Follow steps 1-7 to pro
g
ram telephone numbers
2 and 3.
9.
When complete, press the * ke
y
to return to the
confi
g
uration menu.