Operator's Manual

69-1353 4
TELEPHONE ACCESS MODULE
DESCRIPTION
Indicators
The three li
g
ht emittin
g
diode (LED) indicators, see Fi
g
.
1, on the front panel illuminate to provide information
about the batter
y
, auxiliar
y
input, and phone line status:
Fig. 1. Status LED indicators.
• batter
y
– When the batter
y
is
g
ood, the LED
flashes momentaril
y
once ever
y
ten seconds.
When the batter
y
is weak, it flashes with a
stead
y
pulse; when the batter
y
is dead (or not
installed), the batter
y
LED is on continuousl
y
.
IMPORTANT:
If the battery indicator is on continuously or
indicates a steady flash, replace the battery
immediately (see Battery Installation section).
Replace the batter
y
annuall
y
and/or
before leavin
g
for an extended period
of time.
• auxiliar
y
input – If an auxiliar
y
sensor is
connected and has tripped, the auxiliar
y
input
LED illuminates.
IMPORTANT:
Determine the cause of the sensor trip and
resolve immediately.
• on line – When the Telephone Access Module
answers the phone line or is in the process of
dialin
g
out an alert messa
g
e, the on line LED
illuminates.
Pass Code Reset Button
If
y
ou have for
g
otten
y
our Pass Code, use the reset
button to reset the Pass Code to the ori
g
inal factor
y
settin
g
of 1 2 3 4.
To reset the Pass Code, Fi
g
. 4, to the factor
y
settin
g
,
press and hold the reset button for five seconds. After
five seconds, all three LEDs flash once.
M14812
on line
auxiliary input
battery
STATUS LEDs
BATTERY
AUXILIARY INPUT
ON LINE
80
90
70
60
90
80
70
60