Product Manual

Table Of Contents
GasAlertMaxXT II
User Manual
12
Firmware Version
2. The current firmware version installed on the detector
displays on the LCD.
Startup Message
3. If enabled and data is entered in Fleet Manager II, a
startup message (25 characters per line) displays or
scrolls (depending upon length of message) on the LCD.
If the startup message option is not enabled, it is
bypassed during the startup test.
Refer to Startup Message Top Line
in User Options.
Location Logging
4. If the Location Logging option is enabled, the detector
prompts for a number (1-999) to be entered that identifies
the location (wells, plants, or other areas) where the
detector is being used.
Within 3 seconds, press and continue pressing C until
the desired number displays. To scroll rapidly, press and
hold C.
Note
The site ID number that is entered does not reset when the
detector is deactivated. If required, enter a new site ID when
the detector is again activated.