CTB7NCTETK « Owner's Manual Label wire and remove old wall plate Use 2 screwdriver to desertion wires one by ons. As you disconnect sate wire, wrap it with the labial matching the letter on your oid thermostat. (Adhesive labels are supplied in your thermostat package.) into the wall opening. Wrap supplied labels securely around each wire. Do net lot wires fall Into wall opening! IGNORE WIRE COLORS: Use only letter designations to identity wire types.
English: Page 1 » Fran gals : Page § « Espadrille Plugin 11 1. Drill holes at pencil-mal locations {3/16° for drywall, 7/32" for plaster). 2. Use hammer to tap anchors into holes until flush with wall. 3. [Optional Pull wires through cover plats (If sanded to mover Familiars theft by the old thermostat), 4. Pull wires through thermostat bass, position over ranchers, then Insert mounting screws. Hack label If desired, then tighten craws. 1.
CTBTN/CTETK « Owner's Manual Sot fun operation switch (CTN) Move the switch to ths proper setting for your system: P LEVEL: F: For gas or oil jesting systems, leave the fan operation switch in this factory-sat position (for systems that control the fan in a call for heaths. E: Chang the switch to this settling for jest pump or strict heat systems.