Installation Manual

13
Indoor sensor operation
Mounting an indoor sensor
1 Remove the wallplate and mount
it 4 to 6 feet above the floor on an
interior wall. Drill 3/16-inch holes
for drywall, 7/32-inch for plaster.
2 Attach sensor securely to wallplate
as shown.
Temperature control
The thermostat can be set to respond to
its internal temperature sensor, or to an
optional remote indoor sensor. If multiple
sensors are selected, the thermostat will
respond to an average of temperatures
detected at each sensor.
Humidification control
If optional remote indoor sensors are
installed, you can choose which sensor
you want to use for humidification control.
You can use a different sensor for
dehumidification.
Dehumidification control
If optional remote indoor sensors are
installed, you can choose which sensor
you want to use for dehumidification
control. For example, you can use one
sensor for humidification control, and
another for dehumidification.