Installation Manual

9
4.3 When you see the prompt Do you
have RedLINK accessories to
connect? Touch Yes or No.
• If you select Yes, you will be
prompted to Press Connect on all
new accessories. Continue to Step
4.4.
• If you select No, continue to Step 4.5.
4.4 Connect each RedLINK accessory.
NOTE: Make sure accessories are at
least 2 feet away from the EIM during
the linking process.
4.4a While the Add Device screen
is displayed (listening mode),
press and quickly release the
CONNECT button on each new
RedLINK accessory.
4.4b After a short delay (up to 20
seconds), check the thermostat
to confirm the connection of
each RedLINK accessory.
4.4c Touch Done at the thermostat
after all new RedLINK
accessories are connected.
NOTE: The thermostat displays a
countdown timer while in listening
mode. If it detects no activity for 15
minutes, it exits listening mode.
Done
4.5 Finish the initial setup.
Finish the setup by selecting the
desired options. Touch Done after you
select the last option you want to
change.
The thermostat now displays its Home
screen and the thermostat setup is
complete.
Listening mode
Listening mode