Redesigned Prestige IAQ Owners Manual

19 69-2740—01
45% Humidity
Using the humidity display
In some circumstances, the humidity
displayed on the Home screen may not
match humidity near the thermostat.
Some systems are set up to use two
sensors, one to control humidification,
the other for dehumidification. These
sensors are often installed in different
locations.
Depending on how your thermostat was
installed, the thermostat Home screen
will display humidity readings from only
one sensor.
Humidity reading
depends on
location of sensor.
Optional accessories
Portable Comfort Control
If you have only one thermostat, you move this remote control
from room to room (like a portable thermostat), to make sure the
temperature is comfortable in the room you’re using. If you have
multiple thermostats, you can view and adjust the temperature in
each room from your armchair.
Wireless Outdoor Sensor
With a wireless outdoor sensor, your Prestige
®
thermostat can
display outside temperature and humidity. This information can
also be displayed on your handheld Portable Comfort Control.
Wireless Indoor Sensor
If an indoor sensor is installed, your Prestige
®
thermostat will
respond to temperature and humidity readings at the sensor
location - providing comfort where the sensor is located. With
multiple sensors, the thermostat can average temperature readings
from each, to optimize comfort throughout your home.