Redesigned Prestige IAQ Owners Manual

69-2740—01 20
Optional accessories
RedLINK™ Internet Gateway
The Honeywell RedLINK Internet Gateway gives you remote
access to your Prestige
®
thermostat from the web, smart
phone or tablet. You can view or adjust indoor temperature,
system mode and other settings. The Gateway can also send
alerts to as many as 6 email addresses to notify you if a
problem occurs.
Wireless Entry/Exit Remote
This device mounts beside your door for one-touch control.
Press Away to control to an energy saving temperature
when you leave home. Press Home to control to a
comfortable temperature when you return. To change pre-set
temperatures, go to MENU > Entry/Exit Remote Settings.
Wireless Vent and Filter Boost Remote
This device mounts anywhere in your home (typically
bathroom or kitchen) for convenient, on-demand ventilation.
For increased ventilation, select 20, 40, or 60 minutes.
Troubleshooting
If you have difficulty with your thermostat, try these suggestions. Most problems
can be corrected quickly and easily.
Screen is
blank
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating and cooling system is on.
• Make sure furnace door is closed securely.
Screen is
difficult to
read
• Change screen brightness using Preferences menu (see page 14).
• At 2 am each day, Prestige thermostats change screen colors for an
hour, to prevent burn-in. Touch the screen at any time to restore pre-
set screen colors.
Heating
or cooling
system does
not respond
• Touch SYSTEM to set system to Heat. Make sure the temperature is set
higher than the Inside temperature.
• Touch SYSTEM to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• If “Waiting For Equipment” is displayed, the compressor protection
timer is on. Wait 5 minutes for the system to restart safely, without
damaging the compressor.