Zoning Product Family

ZONING
When Honeywell re-invented zoning panels with TrueZONE
®
, it said
goodbye dip switches and hello simplicity. Installation is fast and easy,
and because TrueZONE ensures that the system is operating properly
before the installer leaves the jobsite, callbacks are virtually eliminated.
TrueZONE
®
Panels
Intuitive Installer Setup — Easy-to-follow,
digital display guides you through the installation.
(HZ432 and HZ322)
RedLINK
TM
Wireless Technology — Eliminates pulling
thermostat wires to the TrueZONE panel and allows for
added comfort control with the Portable Comfort Control
and Wireless Outdoor Air Sensor. (HZ432 and HZ322
only, Wireless Adapter Required)
Standardized Checkout Procedure — Ensures that
every installer checks out in the same way every time
and that all zones are operating correctly before leaving
the jobsite. Only one installer needed for checkout.
(HZ432 and HZ322)
Robust Push Terminals — Cut wiring time in half
compared to screw terminals — with no screwdriver
required. Plus, wires lock in to the terminals for a tight fit.
Common-Sense LEDs — Indicate which zones are
calling, what stage they are calling for (heat/cool) and
when the emergency heat is on.
Universal Application — Works with virtually any
brand equipment for zone control of conventional,
heat pump or dual-fuel systems.
Clean, Professional Installation — Patented wire
channel allows installer to run wires on the side, top,
bottom or backside of the panel and wire anchors
help hold wires in place.
Smaller Footprint — All panels are only eight inches
wide and can be mounted anywhere — on the return
duct, studs or wall next to the system.
Variable-Speed Fan Control — Reduces blower
speed in cooling when one zone is calling.
Discharge Temperature (DATS) Staging —
Downstages equipment when discharge air
temperature is near the limit or shuts down.
Advanced Dual-Fuel Operation — Offers dual-fuel
changeover based on outdoor temperature and/or
thermostat staging. (HZ432 only)
Description Part Number Kit
*
4 zone, 3H/2C panel used for conventional, heat pump or dual-fuel systems; RedLINK
enabled; expand up to 32 zones with TAZ-4
HZ432
-
3 zone, 2H/2C panel used for conventional or heat pump equipment; RedLINK enabled HZ322
-
3 zone, 1H/1C panel used for conventional equipment HZ311
-
2 zone, 2H/1C panel used for heat pumps with auxiliary heat HZ221
-
Includes (1) HZ432 panel, (1) transformer and (1) C7735A discharge air temperature sensor
-
HZ432K
Includes (1) HZ332 panel, (1) transformer and (1) C7735A discharge air temperature sensor
-
HZ322K
Includes (1) HZ311 panel, (1) transformer and (1) C7735A discharge air temperature sensor
-
HZ311K
Includes (1) HZ221 panel, (1) transformer and (1) C7735A discharge air temperature sensor
-
HZ221K
Honeywell delivers ease and simplicity with TrueZONE panels:
TrueZONE
®
Panels
*Kit includes discharge air temperature sensor and 40 VA Transformer
3