ZD Series Dampers Product Data

ZD SERIES DAMPERS
68-0247-2 2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).
2. Honeywell Customer Care
1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
SPECIFICATIONS
IMPORTANT
The specifications given in this publication do not
include normal manufacturing tolerances. Therefore,
this unit may not exactly match the listed specifica-
tions. Also, this product is tested and calibrated
under closely controlled conditions, and some minor
differences in performance can be expected if those
conditions are changed.
Available Damper Sizes: Even sizes from 6 in. x 6 in. up to
36 in. x 36 in.
Damper Dimensions: All ZD dampers are actually sized
5/32 in. smaller than the listed size to ensure correct fit.
Motor Electrical Rating: 24 Vac, 60 Hz, 0.32 A.
Motor Electrical Connection: 4 in. leadwire.
Motor Nominal Angular Rotation: 90°.
Motor Torque: Minimum 71 in.-oz. (500 milli-newton meters)
output torque available when motor is energized and
device is at the spring return initial start position.
Nominal Motor Timing at 77°F (25°C) Ambient:
Energized at rated load: 30 seconds.
De-energized (spring return):10 seconds.
Motor Ambient Temperature Rating: 40° to 140°F (5° to
60°C).
Motor Finish: Zinc-plated steel, anodized aluminum.
Motor Shaft Rotation Direction: Clockwise, when ener-
gized and viewed from the base or shaft end.
Motor Mounting Means: Direct connection to damper shaft.
Motor Mounting Position: Multi-poise.
Motor Dimensions: See Fig. 1.
Fig. 1. Motor dimensions in in. (mm).
* Nominal Device Dimensions (see FIg. 1.).
AB CDEFGH I JKL
in. 2-3/8 3-3/8 3-1/2 5/16 1-1/4 3/4 5/8 2-5/16 1-3/16 1-5/16 1/4 1-9/16
mm 60 84.5 88 8.2 31.5 19.3 15.8 58.6 29.3 33.5 6.4 40.4
G
F
C
E
A
D
K
M
J
H
L
E
M20154