MICRO SWITCH™ Sealed Subminiature Basic Switches ZW Series Datasheet
MICRO SWITCH™ ZW Series Sealed Subminiature Basic Switches Honeywell’s MICRO SWITCH™ ZW Series is a sealed subminiature snap action switch from the Honeywell family of Z Series subminiature basic switches. Although small in size, the ZW Series is rated for controlling electrical loads ranging from logic level/computer-based circuits to power-duty switching (up to 6 amps and up to 250 Vac).
Features and Benefits SMALL PACKAGE SIZE Subminiature package size allows the MICRO SWITCH™ ZW Series switch to fit in many applications where other sensors or switches are too large. IP67 sealing: pre-wired switches WELL SUITED FOR POWER-DUTY AND LOGIC-LEVEL LOADS SPDT, SPNC, or SPNO switch options are available and designed to meet various circuit requirements. ZW Series can control power-duty switching with silver contacts or logic-level computer-based circuits with gold-plated contacts.
ZW Series PRODUCT NOMENCLATURE ZW 50 F 15 A Switch Type Current Rating Operating Force4 Terminal Type (Levers Mounted Internally) (at pin plunger) ZW Series 0.1A 125/250 Vac 10 (Gold-plated E Sealed contacts) Subminiature 6A: 125/250 Vac 50 (Silver contacts) ONLY F Basic Switch Actuator Type3 D 1 Construction Circuitry 150 g max. 15 Solder A Pin plunger D IP00 Dust tight 1 SPDT 203 g max.
MICRO SWITCH™ Sealed Subminiature Basic Switches Table 1.
ZW Series O.F. • R.F. • P.T. • O.T. • D.T. • O.P. • PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings Catalog Listing Pin plunger Std. straight lever Actuator Circuitry/ Contact Material Elect. Rating Spec. Operating force Release force Pretravel Overtravel Differential travel Operating position Termination O.F. max. N [g] (page 5) ZW10F20AD1 Pin plunger SPDT/ Gold plate 0.
MICRO SWITCH™ Sealed Subminiature Basic Switches O.P. from mounting hole mm [in] O.P. from base of terminal mm [in] (see page 8) (see page 8) 0,49 N [50 g] – 0,49 N [50 g] R.F. max. N [g] O.F. • R.F. • P.T. • O.T. • D.T. • O.P. • Operating force Release force Pretravel Overtravel Differential travel Operating position P.T. max. O.T. min. D.T. max. 11,5 ±0,3 [0.45 ±0.012] 1,2 mm [0.05 in] 0,6 mm [0.02 in] 0,2 mm [0.01 in] 8,4 ±0,3 [0.33 ±0.012] – 1,2 mm [0.05 in] 0,6 mm [0.
ZW Series MOUNTING DIMENSIONS MOUNTING DIMENSIONS Ø 2,30 ± 0,10 [0.091 ±0.003] 2,35 [0.093] 2,30 ±0,10 [0.091 ±0.003] 9,25 [0.364] 2,60 ± 0,10 [0.102 ±0.003] 5,20 [0.205] 6,40 [0.252] 19,80 [0.780] TERMINAL TYPES TYPE 15 - SOLDER (STRAIGHT) TYPE 20 - PCB (STRAIGHT) PT Ø 1,80 [0.071] 0,80 [0.031] 4,10 [0.161] 7,50 [0.295] 7,50 [0.295] 0,50 ±0,05 [0.020 ±0.002] 2,80 [0.110] A (35°) 2,40 [0.094] 2,40 [0.094] 7,50 [0.295] Ø 1,20 [0.047] 7,50 [0.295] 0,50 ±0,05 [0.020 ±0.
ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: • Product installation instructions • Product range guide • Product nomenclature tree WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury.
