MICRO SWITCH™ Subminiature Basic Switches ZX Series Datasheet
MICRO SWITCH™ ZX Series Subminiature Basic Switches Honeywell’s MICRO SWITCH™ ZX Series is a subminiature snap-action switch from the family of Z series subminiature basic switches. Although small in size, the ZX Series is rated for controlling electrical loads ranging from logic-level/computer-based circuits to limited power-duty switching (up to 3 A/125 Vac).
Features and Benefits SMALL PACKAGE SIZE Subminiature package size (6,5 mm x 12,8 mm [0.25 in x 0.50 in]) allows the MICRO SWITCH™ ZX Series switch to fit in applications where other sensors or switches are too large. Enhanced performance in a compact package WELL SUITED FOR POWER-DUTY AND LOGIC-LEVEL LOADS ZX switch design helps assure control of limited power-duty switching with silver contacts or logic-level (low voltage, and milliamperes) with gold-plated contacts.
ZX Series PRODUCT NOMENCLATURE ZX 10 E 10 A Switch Type Current Rating Operating Force3 Terminal Type (Levers Mounted Internal) ZX Series Subminiature 10 Basic 40 Switch (at pin plunger) Actuator Type4 0.1 A 48 Vdc/125 Vac 0.2 A 60 Vdc gold-plated contacts C 90 gf max. 10 Solder, straight A Pin plunger 1 A/3 A 125 Vac silver contacts E 150 gf max. 20 PCB (straight) B Short straight lever (10 mm) 30 PCB (snap-in) C Standard straight lever (13 mm) 50 PCB (right side) E Sim.
MICRO SWITCH™ Subminiature Basic Switches Table 1.
ZX Series O.F. • R.F. • P.T. • O.T. • D.T. • O.P. • PRODUCT SPECIFICATIONS AND LISTINGS 6 Termination O.F. max. N [g] R.F. min. N [g] O.P. from mounting hole mm [in] (see page 8) O.P. from plastic switch base mm [in] (see page 8) O.P. from form in PCB terminals mm [in] (see page 8) P.T. max. mm [in] O.T. min. mm [in] D.T. max. mm [in] Std. straight Lever 13 mm [0.51 in] Elect. Rating Spec.
MICRO SWITCH™ Subminiature Basic Switches Contact Material Elect. Rating Spec. (page 4) Termination O.F. max. N [g] R.F. min. N [g] O.P. from mounting hole mm [in] (see page 8) O.P. from plastic switch base mm [in] (see page 8) O.P. from form in PCB terminals mm [in] (see page 8) P.T. max. mm [in] O.T. min. mm [in] D.T. max. mm [in] Operating force Release force Pretravel Overtravel Differential travel Operating position Catalog Listing ZX10C30B01 Gold Plated 0.
ZX Series 12,70 [0.500] MOUNTING DIMENSIONS Ø 2,05 ± 0,10 [0.081 ±0.003] 2,05 ± 0,10 [0.081 ±0.003] 6,50 [0.256] 0,40 [0.016] 1,50 [0.059] Ø 2,20 ± 0,10 [0.087 ±0.003] 3,15 [0.124] 5.80 [.228] 6,50 ± 0,15 [0.256 ±0.005] 12,80 [0.504] TYPE 30 -PCB SNAP-IN TYPE 20 - PCB STRAIGHT TYPE 10 - SOLDER STRAIGHT 3X 1,20 [0.047] 3X 2,00 [0.079] COM NO 3X 2,20 [0.087] 5,08 [0.200] 5,08 [0.200] 3X 5,00 [0.197] 3X 5,00 [0.197] NC NO 0,40 [0.016] 5,08 [0.200] NC NO NC 5,08 [0.200] 5,08 [0.
ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: • Product installation instructions • Product range guide • Product nomenclature tree WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury.