User's Manual
C
Clip
Pin
Set
Screw
E
A
A
F
B
A
8
ASSEMBLY INSTRUCTIONS
4. Secure mounting bracket (C) to outlet box using screws,
VSULQJZDVKHUVDQGÀDWZDVKHUVSURYLGHGZLWKWKHRXWOHW
box (not included). [Fig. 4]
Note: It is very important that you use the proper
hardware when installing the mounting bracket (C) as
this will support the fan.
Important: If using the angle mount, make sure open
end of mounting bracket (C) is installed facing the higher
point of ceiling.
5. Remove pin and clip from downrod (A). Partially loosen
set screws in motor housing yoke at top of motor
housing (E). [Fig. 5]
Help Hint: Downrod style mounting is best suited for
ceilings 8 ft. or higher. For taller ceilings you may want
to use a longer downrod (not included). Angle style
mounting is best suited for angled or vaulted ceilings.
A longer downrod is sometimes necessary to ensure
proper blade clearance.
6. Insert downrod (A) through canopy (B) and yoke cover
(F). Thread wires from motor housing (E) through
downrod (A). [Fig. 6]
4
5
6