Safety Information

01 02 03 04 05 06
07 08 09 10
11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30
Key Definitions
Remote Transmitter: Transmits the signal to the Receiver Collar. It is
waterproof.
Digital Display
Dog 1: The active collar symbol will display to indicate Dog 1. Dog 1 and
Dog 2 symbols will be displayed and switched (additional purchase
required for 2 dog system).
Operation Lock: When the remote is ready to power off, the lock sign will
show up on the screen momentarily, indicating power off mode.
Operating Guide
STEP 1: Prepare the Remote Transmitter
Charge the Remote Transmitter
1.Locate the Charging Jack under the Remote.
2.Connect one of the charger connectors to the Remote Transmitter
Charging Jack.
3.Plug the charger into a standard wall outlet.
4.Charge the Remote Transmitter. Note: The Battery Indicator on the
screen and the status light will indicate the charging process.
Turning ON the Transmitter
If the remote is turned off, you need to press and hold the lock button for
about 3 seconds to turn it back on. Light up the Transmitter by holding it
up, the display will automatically turn on, because of its built-in motion
sensor.
Transmitter Digital Display
After 30 seconds with no buttons pressed, the display shuts off and the
Transmitter goes into battery conservation mode. Holding it up, the
screen will turn back on.
Level of Shock: Shows Dog 1 or Dog 2 level of Shock (Low-1 to High-10).
Level of Vibration: Shows Dog 1 or Dog 2 level of Vibration (Low-1 to
High-5).
Remote Battery Indicator: The battery indicator provides constant
awareness of the remote battery’s power level.
Receiver Battery Indicator: The battery indicator provides constant
awareness of the receiver battery’s power level.
Button Definitions (factory default settings for Dog 1 mode)