Safety Information

01 02 03 04 05 06
07 08 09 10 11 12
13 14
15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30
Pairing Guide
The remote and the receiver are paired by default at factory. In case you
want to repair them, please follow below instructions.
STEP 1: Enter pairing mode
Holding the two minus buttons “-” on both side on the remote at the
same time for 3 seconds, the DOG 1 (or DOG 2) sign on the remote
screen starts to blink, indicating the remote is ready to pair with the
receiver. Now move to step 2.
STEP 2: Pair the receiver
Press the power and record button on the receiver simultaneously,
until the DOG1/DOG2 sign on the screen blinks rapidly and then
stops blinking, indicating a successful pairing. Now your receiver is
paired with DOG1 or DOG2, depending which DOG you choose by
switching between DOG1 or DOG2.
Note: For 1 DOG system, only DOG1 is available for pairing. For 2
DOGs system, you are able to pair them separately.