Safety Information

01 02 03 04 05 06
07 08 09 10 11 12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30
Important Safety Information
Not for use with aggressive dogs. Do not use this product if your dog is
aggressive, or if your dog is prone to aggressive behavior. Aggressive
dogs can cause severe injury and even death to their owner and others. If
you are unsure whether this product is appropriate for your dog, please
consult your veterinarian or certified trainer.
Safety during on-leash training. It is vitally important that you and your
dog remain safe while learning during on-leash training. Your dog should
be on a strong leash, long enough for him to attempt to chase an object,
but short enough for him not to reach a road or other unsafe area. You
must also be physically strong enough to restrain your dog when he tries
to chase.
Risk of skin damage. Please read and follow the instructions in this
manual. Proper fit of the collar is important. A collar worn for too long or
made too tight on the pet’s neck may cause skin damage. Ranging from
redness to pressure ulcers; this condition is commonly known as bed
sores.
•Avoid leaving the collar on the dog for more than 12 hours per day.
•When possible reposition the collar on the pet’s neck every 1 to 2 hours.
•Check the fit to prevent excessive pressure; follow the instructions in this manual.
•Never connect a lead to the electronic collar; it will cause excessive pressure on the
contacts.
•When using a separate collar for a lead, don’t put pressure on the electronic collar.
•Wash the dog’s neck area and the contacts of the collar weekly with a damp cloth.
•Examine the contact area daily for signs of a rash or a sore.
•If a rash or sore is found, discontinue use of the collar until the skin has healed.
•If the condition persists beyond 48 hours, see your veterinarian.
Key Definitions
Remote Transmitter: Transmits the signal to the Receiver Collar. It is
waterproof.
Digital Display
Dog 1: The active collar symbol will display to indicate Dog 1. Dog 1 and
Dog 2 symbols will be displayed and switched (additional purchase
required for 2 dog system).
Operation Lock: When the remote is ready to power off, the lock sign will
show up on the screen momentarily, indicating power off mode.
Level of Shock: Shows Dog 1 or Dog 2 level of Shock (Low-1 to High-10).
Level of Vibration: Shows Dog 1 or Dog 2 level of Vibration (Low-1 to
High-5).
Remote Battery Indicator: The battery indicator provides constant
awareness of the remote battery’s power level.
Receiver Battery Indicator: The battery indicator provides constant
awareness of the receiver battery’s power level.
Button Definitions (factory default settings for Dog 1 mode)